View Full Version : Front bumper access mod
How did you guys do it?
My front bumper is currently off the car because i had to get it towed somewhere. i won't be putting it back on until i'm able to find some way to modify it where I have easy access to attach and remove it.
I've seen some locals do it with clips and such, but i have no idea.
I'd like to make it look clean, and not have my bumper fall off as i drive.
I would def like to know as well.
iamtheyi
07-02-2012, 02:00 AM
dzus fasteners
blueshark123
07-02-2012, 08:23 AM
zip ties lol but you could zip tieon the side by the fenders and clips where it attaches under the hood so it doesnt look ghetto. Shouldnt take longer then 2 mins
doitsidewayz
07-02-2012, 11:11 AM
Mine is held by zip ties...lol
2 on each side and 2 in the middle so it won't sag.
BoostSlideWayz
07-02-2012, 11:28 AM
Ive seen some people use almost like toolbox latches, where you literally just unlatch your bumper like the way you do your tool box. VERY VERY handy for track driving when your loading up your car or even if you need to get to something fast..
I wanted to do it to my car how ever when i did my front end conversion .. the lower half of the bumper isnt solid so i had to make braces that just bolt right into the bumper.... But otherwise i would have done it !!!
ixfxi
07-02-2012, 11:42 AM
fuck dzus fasteners... its all about velcro
real racers use that shit
delado
07-02-2012, 11:46 AM
I've noticed a lot of hardparked queens use these
http://t1.gstatic.com/images?q=tbn:ANd9GcTRlMkxteXyzuabRIBQ4YSKy7THmnHOm _t3Vvv_5p62WHApLceiJnKK6WqVaQ
Edwin562
07-02-2012, 11:46 AM
Duct tape works wonders. make sure you get the one with zebra print on it.
thefro526
07-02-2012, 11:50 AM
I've noticed a lot of hardparked queens use these
http://t1.gstatic.com/images?q=tbn:ANd9GcTRlMkxteXyzuabRIBQ4YSKy7THmnHOm _t3Vvv_5p62WHApLceiJnKK6WqVaQ
I've been considering getting a set of those. If you have an OEM bumper, the studs handle all of the alignment (assuming S13) so you just need something to hold the bumper in place. Up top, it's just a few 10mm bolts which take all of 8 seconds to remove.
iamthewinner
07-02-2012, 12:01 PM
Does it require to drill holes on front fender to use those quick releases?
donabeast
07-02-2012, 12:20 PM
http://i26.photobucket.com/albums/c121/donabeast/240/Picture005.jpg
zip ties are crap
delado
07-02-2012, 12:33 PM
That's funny you say that because so are sileightys.
fckillerbee
07-02-2012, 01:16 PM
i love zipties...holds everything where I need it...quick and easy to removed. crash while drifting, zipties break, and body kits still looks fucking sweet!
mr.booie
07-02-2012, 01:33 PM
quarter turn fasteners?
s13 loverr
07-02-2012, 02:37 PM
If you don't want to be ghetto I saw a writeup where they installed aerocatch hood pins on the bumper for easy removal. They basically just put them on as if it were a hood in the old screw mounting points. I believe they used two; one for either side. I will look for the write up.
Matej
07-02-2012, 02:37 PM
Use the top bracket from a stock bumper which attaches to the headlight brackets with four bolts. Or just rest the top of the bumper on the headlight brackets and ziptie it to them and to the radiator core, whatever floats your boat. Then use zipties or bolts where the bumper wraps around the fenders. It should not take more than a few minutes to remove, with disconnecting turn signals accounted for.
External mounting solutions are unsightly.
Irresistible
07-02-2012, 02:43 PM
Hidden zipties. You can't even see the zipties that I use to mount my bumper unless you're looking for them. Plus as said before, it holds everything fine (I've gone as fast as the car will let me), and if you crash while drifting/hit something while driving normally, the bumper just rips off and doesnt fall apart into a million pieces.
!Zar!
07-02-2012, 02:57 PM
Zipties and prayers.
i really dont want to use zip ties...
i dont want my bumper falling off when i hit something on the road.
ixfxi
07-02-2012, 03:41 PM
http://i26.photobucket.com/albums/c121/donabeast/240/Picture005.jpg
^ what kind of car is that?????
!Zar!
07-02-2012, 04:21 PM
That is a race car, sir.
Arireese
07-02-2012, 04:24 PM
^ what kind of car is that?????
one that should be burned to death.
death to sileightys
sky53line
07-02-2012, 05:00 PM
I thought the same thing back when I was fitting my body kit... ended up just going to lowes and getting some latches. They work fine. Hold tight. I have 2 zipties in the front holding on to it to pull the front up and keep it from sagging and thats it as far as zipties go. I can have my bumper off in about 20 seconds and back on in another minute or 2.
https://sphotos.xx.fbcdn.net/hphotos-ash3/533365_10150628142926519_1125739758_n.jpg
budlite
07-02-2012, 05:11 PM
looks like shit!^^^
hidden zipties ftw
!Zar!
07-02-2012, 06:54 PM
I thought the same thing back when I was fitting my body kit... ended up just going to lowes and getting some latches. They work fine. Hold tight. I have 2 zipties in the front holding on to it to pull the front up and keep it from sagging and thats it as far as zipties go. I can have my bumper off in about 20 seconds and back on in another minute or 2.
https://sphotos.xx.fbcdn.net/hphotos-ash3/533365_10150628142926519_1125739758_n.jpg
Because Florida
D.Adams
07-02-2012, 07:04 PM
self ejecting dzus
http://farm8.staticflickr.com/7009/6449541079_f4a3cb189f_z.jpg
http://farm8.staticflickr.com/7076/7178921315_96ff888043_c.jpg
Hard to see in this pic but you can see them on the front bumper
http://farm9.staticflickr.com/8008/7346592124_4a8febf1a2_c.jpg
delado
07-02-2012, 07:30 PM
I thought the same thing back when I was fitting my body kit... ended up just going to lowes and getting some latches. They work fine. Hold tight. I have 2 zipties in the front holding on to it to pull the front up and keep it from sagging and thats it as far as zipties go. I can have my bumper off in about 20 seconds and back on in another minute or 2.
https://sphotos.xx.fbcdn.net/hphotos-ash3/533365_10150628142926519_1125739758_n.jpg
:picardfp: :picardfp: :picardfp:
!Zar!
07-02-2012, 08:58 PM
It's okay, he has a race car built for drifting, so that makes it okay to be shitty.
That's how it goes, right?
those latches look like crap...
!Zar!
07-03-2012, 12:34 AM
lolllllllll I just noticed the zipties AROUND the latches.
Damn florida, that one almost slipped past me.
sky53line
07-03-2012, 06:27 AM
Lol Ill be the first one to tell you my whole car looks like shit. The only purpose of these stupid latches is just to take the bumper on and off quickly when at events or to put it on a trailer. But yes, to reiterate it, the car does look like shit.
Fries
07-03-2012, 07:32 AM
Poor Florida kid. Finally found a thread he thought his vehicle could be relevant to and he gets made fun of.
You did it to yourself bro.
Why the shitty quick release? Is a couple bolts up top and a couple zip ties on the sides, really take so long that you need to make your car look like shit?
ixfxi
07-03-2012, 08:05 AM
im at a real loss of words nowadays
every time someone posts a pic of their car in some thread (besides damons mitten thread, or toby's lack of update thread).... i think to myself "what kind of car is that"
seriously... a lot of the cars, they just look so wild and exotic, fitted with these super rare body kits. totally confuses me. i have to check the link at the top of my browser to think im not on NSXprime, FerrariChat or some other forum..... then i say to myself "THIS IS ZILVIA"
race cars. wide body. fasteners w/ zip ties. that nissan road race forum is bullshit, THIS is where its at.
often times, i think ide like to post on other forums like clublexus or one of the various miata forums, and then realize that the people on those forums are..... like this:
i-oZ7DcQPWQ
i dont think i would ever reach a level of tuning like this guy. so instead, i sit back on zilvia and just relax.
silviaks2nr
07-03-2012, 10:14 AM
I thought the same thing back when I was fitting my body kit... ended up just going to lowes and getting some latches. They work fine. Hold tight. I have 2 zipties in the front holding on to it to pull the front up and keep it from sagging and thats it as far as zipties go. I can have my bumper off in about 20 seconds and back on in another minute or 2.
https://sphotos.xx.fbcdn.net/hphotos-ash3/533365_10150628142926519_1125739758_n.jpg
The fuck is this? seriously you should not be allowed to even drive a car let alone modify one.
chris_240sx
07-03-2012, 10:27 AM
External fasteners aren't necessary.
I have 2 bolts in the middle of the bumper in the bumper retainer and a ziptie on each side to keep the corners from sagging.
Removing those and the lights from the bumper takes me like a minute and a half tops.
Cutting my bumper removal time down by 30 seconds isn't worth unsightly latches.
fliprayzin240sx
07-03-2012, 12:56 PM
im at a real loss of words nowadays
every time someone posts a pic of their car in some thread (besides damons mitten thread, or toby's lack of update thread).... i think to myself "what kind of car is that"
seriously... a lot of the cars, they just look so wild and exotic, fitted with these super rare body kits. totally confuses me. i have to check the link at the top of my browser to think im not on NSXprime, FerrariChat or some other forum..... then i say to myself "THIS IS ZILVIA"
race cars. wide body. fasteners w/ zip ties. that nissan road race forum is bullshit, THIS is where its at.
often times, i think ide like to post on other forums like clublexus or one of the various miata forums, and then realize that the people on those forums are..... like this:
i dont think i would ever reach a level of tuning like this guy. so instead, i sit back on zilvia and just relax.
WTF did I just watch?!?! I always thought ricers have an expiration age of about 30 yrs old. Figured at that point, you'd either have enough money to stop buying ricey shit, or get a better car or be too old to be fucking with cars.
Walperstyle
07-03-2012, 01:02 PM
Pagani Zonda's use belt buckle latches...why doesn't my 240sx look like a zonda?
ixfxi
07-03-2012, 05:07 PM
WTF did I just watch?!?!
blew your fucking mind, right?
im telling you... just when you think this forum is full of idiots, i post a link like that and it makes you think twice.
KiLLeR2001
07-03-2012, 05:31 PM
Most of the guys I see driving Miatas are old creepy looking dudes, either that or the fat loser type.
CleanAndLegit
07-03-2012, 05:41 PM
blew your fucking mind, right?
im telling you... just when you think this forum is full of idiots, i post a link like that and it makes you think twice.
seriously mind blown.
so many people have said to use zip ties....
JasianBlazin
07-04-2012, 03:22 AM
so many people have said to use zip ties....
you can get metal zipties that are detachable and reusable. so you get a clean look and reliability.
myKAl
07-04-2012, 03:28 AM
i dont think i would ever reach a level of tuning like this guy. so instead, i sit back on zilvia and just relax.
i thank you for this
Irresistible
07-04-2012, 10:23 AM
Lol Ill be the first one to tell you my whole car looks like shit. The only purpose of these stupid latches is just to take the bumper on and off quickly when at events or to put it on a trailer. But yes, to reiterate it, the car does look like shit.
Why would you take your aero off at events? Then it just looks stupid. I let my shit rip off, then I leave it there till I'm done with my runs.
Which brings me to saying this again, ZIPTIES. They aren't rice or whatever if they're saving your shit from breaking into a million pieces.
slydin240sx
07-04-2012, 11:06 AM
I've noticed a lot of hardparked queens use these
http://t1.gstatic.com/images?q=tbn:ANd9GcTRlMkxteXyzuabRIBQ4YSKy7THmnHOm _t3Vvv_5p62WHApLceiJnKK6WqVaQ
Where do you get these at? Somebody link me!!!
!Zar!
07-04-2012, 11:15 AM
At first when I saw that video I thought to myself, 'This video is too fucking long'. But it was like watching a train wreck... Soon after I found myself watching the second video.
TOO AWESOME.
HIGHFIVEBETA
07-04-2012, 12:32 PM
I wish I had a camera to show you all my setup.. I remove my bumper in a matter of seconds when I need to.
!Zar!
07-04-2012, 12:47 PM
You're from florida, no you don't.
HIGHFIVEBETA
07-04-2012, 12:51 PM
You're from florida, no you don't.
lol ^______^
feito
07-04-2012, 01:19 PM
im at a real loss of words nowadays
every time someone posts a pic of their car in some thread (besides damons mitten thread, or toby's lack of update thread).... i think to myself "what kind of car is that"
seriously... a lot of the cars, they just look so wild and exotic, fitted with these super rare body kits. totally confuses me. i have to check the link at the top of my browser to think im not on NSXprime, FerrariChat or some other forum..... then i say to myself "THIS IS ZILVIA"
race cars. wide body. fasteners w/ zip ties. that nissan road race forum is bullshit, THIS is where its at.
often times, i think ide like to post on other forums like clublexus or one of the various miata forums, and then realize that the people on those forums are..... like this:
i-oZ7DcQPWQ
i dont think i would ever reach a level of tuning like this guy. so instead, i sit back on zilvia and just relax.
i feel weird now, dafuq's going on???!
the MAIN reason for body kits for guys like us is looks, and putting all this stupid shi+ on them make them look ugly, visible sip ties and the florida latches, not to mention all the sagging... if it doesnt fall when driving over speed bumps or over potholes i dont really understand how the hell it can fall off immediately when crashing at an event, i dont even get how it is better to loose it and drive over it and break it (fiberglass, most of us) than to let it hang and drag it till part of it falls off (or your run's over when drifting) for that matter. Fast removal? to save what, 3 min, maybe 5 if you're fat n slow? I mean i doubt that many of us in here r pros and need to shave seconds, in that case you're driving the wrong car... Just save for a damn battery drill and do it the right way, maybe skip a bolt here and there if you're extremely lazy...
KA-Life86
07-04-2012, 01:39 PM
Where do you get these at? Somebody link me!!!
Here you go friend
Password:JDM Quick Release Fasteners | Password JDM (http://passwordjdm.com/PasswordJDM-Quick-Release-Fasteners-P4746C329.aspx)
slydin240sx
07-04-2012, 02:11 PM
Here you go friend
Password:JDM Quick Release Fasteners | Password JDM (http://passwordjdm.com/PasswordJDM-Quick-Release-Fasteners-P4746C329.aspx)
Thank you!!!
KA-Life86
07-04-2012, 04:10 PM
They are a lot bigger than I thought they were, some black ones on my black zenki might not look too bad, but I have to admit they look like dog dick on all the Hondas and acuras I'm seeing them on so far :/ I need to do something with mine for sure, thought about running some aero catches right above the marker lights
Edit: here are some related links I have found
http://www.b15u.com/member-rides-project-cars/7511-power_shift-2005-1-8s-richmond-ky-**rear-lip-page-11**-12.html
Post 236 on this page shows the password Jdm ones on a clean sentra.
http://www.b15u.com/exterior-modifications-paint-bodywork/29615-quick-latch-minis-other-forms-bumper-quick-release.html
I believe the same member has compiled a few other forms here...ignore the retarded h2 latches lol
prowess
07-04-2012, 04:37 PM
best way i've found to mount the front bumper is this:
I threaded bolts in from the bottom of the top bumper supports to use wing nuts for quick removal.
http://img.photobucket.com/albums/v259/domeniccucunato/088c0bf2.jpg
http://img.photobucket.com/albums/v259/domeniccucunato/d81aab4c.jpg
plz excuse the rust.. it holds well, but im going to get some larger diameter washers on there..
at the sides i used "variable depth push fasteners for GM" from Lowe's. they look like this:
http://images.lowes.com/product/converted/008236/008236715927xl.jpg
http://img.photobucket.com/albums/v259/domeniccucunato/6f9b5fce.jpg
and finally at the corners I use 1 zip tie per side. The bumper doesn't fit as great as oem, with all the bracketry and bolts, but with it mounted this way I can remove it in a couple minutes.
http://img.photobucket.com/albums/v259/domeniccucunato/d5c7c0ef.jpg
KA-Life86
07-04-2012, 04:45 PM
I like the wingnut idea
vehicle336
07-04-2012, 09:12 PM
often times, i think ide like to post on other forums like clublexus or one of the various miata forums, and then realize that the people on those forums are..... like this:
i dont think i would ever reach a level of tuning like this guy. so instead, i sit back on zilvia and just relax.
OH JESUS!!
OH JESUS!!!
IM DYIN.... Holy hell, I'm crying from laughing so hard...
Are we sure this guy isn't a transplant from Florida to AZ?
WERDdabuilder
07-04-2012, 10:31 PM
wtf did i just watch....
i even watched the 2nd vid...
http://static.bbmp3.com/smilies/dead.gifhttp://imageshack.us/a/img196/166/pgdead.png
http://i.imgur.com/UmpOi.gif
i dont think he's trollin either....
neither are the people commenting on his car...
Your cars bad ass
Very well done Peter!!!!!
dawagarage
07-04-2012, 11:40 PM
i feel bad for the dude with the miata. cuz i like his voice. very friendly. :hey:
rat240
07-05-2012, 12:02 AM
nice 360 though
prowess, looks like that's the best way honestly..
that sentra looked like his bumper was still sagging.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.