Custom Full Race-Garrett Core FMIC for 500+hp Applications!

[SoloSilvia]

-Full Race-Garrett Core Custom Front Mount Intercooler for HIGH HP APPLICATIONS 500+ Holding up to 950+, If your stepping up your power then you need to step up your air flow starting with this beefy FMIC! Most cheaper models will only hold to 300/400 before performance starts declining. This FMIC will keep your power where it needs to be! Very lightly used, mainly on a show vehicle. Freshly polished and ready for a new home!

Core size is 12" x 24" x 3.5", pipe outlets are 2.5", overall width 35 1/2" from end of outlets.

MSRP on core alone is $600 -$550 obo

May trade on cheaper FMIC setup with piping and BOV
PRICE DROP! $500 SHIPPED!!! FIRM!

Here is a link to the specs of this core:
Intercooler Core - Garrett GT 24x12x3.5, P/N: 703520-6005 : atpturbo.com (http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Product_Code=ATP-INT-006&Category_Code=INT)

Front
http://i109.photobucket.com/albums/n74/brsilvia/SR20DET%20Full%20Build%20Part%20Out/IMG_6599.jpg (http://i109.photobucket.com/albums/n74/brsilvia/SR20DET%20Full%20Build%20Part%20Out/IMG_6599.jpg)

Back
http://i109.photobucket.com/albums/n74/brsilvia/SR20DET%20Full%20Build%20Part%20Out/IMG_6605.jpg (http://i109.photobucket.com/albums/n74/brsilvia/SR20DET%20Full%20Build%20Part%20Out/IMG_6605.jpg)

Front straight on
http://i109.photobucket.com/albums/n74/brsilvia/SR20DET%20Full%20Build%20Part%20Out/IMG_6597.jpg (http://i109.photobucket.com/albums/n74/brsilvia/SR20DET%20Full%20Build%20Part%20Out/IMG_6597.jpg)

Bottom, reinforced welded mounts
http://i109.photobucket.com/albums/n74/brsilvia/SR20DET%20Full%20Build%20Part%20Out/IMG_6592.jpg (http://i109.photobucket.com/albums/n74/brsilvia/SR20DET%20Full%20Build%20Part%20Out/IMG_6592.jpg)

Fins
http://i109.photobucket.com/albums/n74/brsilvia/SR20DET%20Full%20Build%20Part%20Out/IMG_6603.jpg (http://i109.photobucket.com/albums/n74/brsilvia/SR20DET%20Full%20Build%20Part%20Out/IMG_6603.jpg)

End tanks
http://i109.photobucket.com/albums/n74/brsilvia/SR20DET%20Full%20Build%20Part%20Out/IMG_6598.jpg (http://i109.photobucket.com/albums/n74/brsilvia/SR20DET%20Full%20Build%20Part%20Out/IMG_6598.jpg)

[SoloSilvia]

bump for a serious FMIC!

[SoloSilvia]

PRICE DROP! $500 SHIPPED!!! FIRM!

I dont ave or plan on having any vehicle over 500 hp anytime soon anymore. That is the only reason I am selling! This is a must if your going over 400/500 hp!

[reptarbad]

What was this mounted on before?

[SoloSilvia]

This was mounted on my S14 when I was making around 700hp! I toned my whole swap down to around 350hp and going with a cheaper fmic setup.

Here its is mounted on the car, sits and fits about the same as every other fmic. Just way beefier!

http://i109.photobucket.com/albums/n74/brsilvia/SR20DET%20Full%20Build%20Part%20Out/mysil.jpg

[SoloSilvia]

Last bump...I may just use this again on my new setup as I will not find anything else to compare.
Still sitting pretty ready for sale. Probably be a week or so before my cars back on road, if not sold, I'm just gonna run it!

[realwheeldrives]

are the end tank outlets both 2.5?

[SoloSilvia]

are the end tank outlets both 2.5?

Yes they are.