Sr Madness!!

[FutureFab]

Whats listed is parts left that are available.

Was trying to sell complete sr swap locally but no ones interested, so part out it is!

Found a buyer for long block, turbo and intake manifold, so everything else must go!

Keeping the intercooler tho.

http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/775E56F3-orig.jpg

http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/201E7AE4-orig.jpg

http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/47E60626-orig.jpg



2871r T25 flanged turbo. 3 inch compressor inlet. Has .86 5 bolt exhaust housing, adjustable actuator, spins free long after motor is shut off. Ran on 14psi. Sold
http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/1BFA01C7-orig.jpg[/MIG]

720cc top feed denso injectors in working order, with resistor pack, 200
[IMG]http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/B27A7111-orig.jpg

Jwt top feed fuel rail, has dual fuel entry on both sides of rail for more even feeding to injectors, center return, 50
http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/0B7847B1-orig.jpg

An dual fuel lines with Y fitting, center return, all -6an 50
http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/F0FAE028-orig.jpg

New in bag intake and exhaust valve stem seals for Sr20det redtop. 20

Stainless divided down pipe, wg tube is smashed in to clear moved forward rack/steering shaft. 40
http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/5234FD3F-orig.jpg
http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/C50937A6-orig.jpg

E5 tuned ecu for s13 red and black tops. Tuned for 2871, 720cc, z32 maf. 350

Stock sr exhaust manifold, lightly ported, sold

Stainless turbo lines, -6an coolant, -3 oil feed, sold

Alum 3 inch turbo intake pipe 40

Z32 Maf sold

sr clutch slave, new 1 month ago, aluminum too, 10

Act 6 puck sprung clutch/pressure plate, never slipped, looks really good. Sold
http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/748B634B-orig.jpg

http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/E36A5768-orig.jpg

http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/A768650D-orig.jpg

http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/3DCED950-orig.jpg

http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/2C72D5C8-orig.jpg
Pad thickness measures .309"
http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/BB46A33F-orig.jpg


S13 stock 5 speed drive shaft w/new center bolts, 50

sr ignitor 50

sr engine wire harness, was running on painless so not plug and play, but supppper easy to wire. 150

sr alternator bracket, 20

sr billit alum silver water pump pulley, 20

sr Iacv 20

sr stock t25 turbo. spins fine, normal small shaft play. working until upgraded to 2871. sold
http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/01220EF2-orig.jpg

Probably more later as the parts come off.


All prices before shipping and paypal fee.

[90S13hatch_tony]

Power steering set-up???
text me at (323)774-7149
Thanks

[Luvs2slide]

Stainless turbo lines, -6an coolant, -3 oil feed, 50

I'll take these lines if it comes with all the fittings to attach to the motor and turbo.

[hockeyrules]

interested in the slave and top feed fuel rail, could i get more pics of how it mounts?

[SR20Dave]

Im interested in buying your WHOLE turbo setup, all lines and everything. txt me 440 724 3347

[FutureFab]

No powersteering or ac stuff guys sorry.

Lines and rail might go with full kit.

Throttle body sold.

[Luvs2slide]

Approx how many miles on clutch?

[FutureFab]

Approx 5000, mostly freeway, couple events, i can measure thickness when i take it out.

[FutureFab]

Sold turbo, Cas, throttle body.

[240zach]

have the stock ecu? pm me price shipped to 95765

[FutureFab]

No stock ecu, only the chipped and tuned one.

[FutureFab]

Downpipe & turbo lines sold.

[FutureFab]

Guy backed out of O2/downpipe, still available.

[bryanfain]

Pics of the clutch please :D

[ScRote20det]

pm me price of head, fuel rail, injectors, and fuel rail lines. 25177

[FutureFab]

Added clutch pics per request. Price pm'ed also

[CleanAndLegit]

how much for all the fuel things? and also the 3inch intake pipe, best price shipped to 92551

[bryanfain]

Bump for some nice parts :D

[drumnbasslvr]

also interested in cylinder head. 79916 must be complete (cams not a problem if without) and must not have scoring on journals.

[FutureFab]

Sorry, head sold with block as longblock setup.

[FutureFab]

CleanAndLegit, I could do 300 shipped for the parts you asked about.

[FutureFab]

Still some parts left.