Best headgasket for a KA24E?

[Purestock240]

running high compression, need the best gasket i can get, any recommendations or reviews? single cam KA

I cant find any copper or all metal gaskets so im not sure what to do

[[email protected]]

I *believe* don't quote me on it, but a twin cam one can be used if you cut off the front timing part. Use the high performance felpro
Avoid cometic

[eek]

I used a Felpro on the last KA-T build it was a DOHC but it worked fine.

[Purestock240]

thanks, im looking into using a twin cam block, why not use a twin cam copper one?

[Edwin562]

OEM is always best.

But if your looking for aftermarket, Cos-worth has a Ka HG.

[Purestock240]

OEM is always best.

But if your looking for aftermarket, Cos-worth has a Ka HG.

well im looking for whatever will hold up to 190psi compression, 9.5:1 and 7200rpm all day

[Edwin562]

your planning to drift/race every time your drive the car?

[Purestock240]

your planning to drift/race every time your drive the car?

its a trailered race only car, paved 1/3 mile oval track

[iveexcaped3]

Best bet is said a de hg with timing cut off then high temp seal the front cover. That's what they all use for ka24e-t at 15lbs of boost

[Purestock240]

Best bet is said a de hg with timing cut off then high temp seal the front cover. That's what they all use for ka24e-t at 15lbs of boost

but are they using a cometic or copper or?

[iveexcaped3]

Everyone I know uses cometics and that's what I plan on using. I'll be running 20lbs of boost.

[GroundPerformance]

You can use KA24DE Metal HG and ARP Headstuds on the KA24E. I'm actually doing the same for KA24ET build soon. GL!

[di-devol]

Felpro. 305hp ka24e-t, no issues.

[zneubauer]

I run a cometic and so far I like it, hopefully you do.