Skraight
06-23-2012, 02:26 PM
So I cracked a cam in the head and tore down the car, would sell EVERYTHING listed including the car with clean title for 2500 firm.
ALSO WOULD ACCEPT TRADES ON OTHER CARS, I WILL/CAN ADD CASH OF COURSE.
I'm at college currently so can't take pictures until next week. Here are some pictures of the car before I tore it down.
Also these are the wheels on the car I bought them off of.
http://i.imgur.com/CpQhk.jpg
http://i.imgur.com/NEzth.jpg
http://i122.photobucket.com/albums/o275/turbodreams954/17892180_l.jpg
http://i122.photobucket.com/albums/o275/turbodreams954/17892159_l.jpg
Off the car:
Ported and polished KA24DE head from a 93.
Z32 MAF
RC 550cc injectors
Project Nissan Top feed fuel rail
RC 950cc injectors (just recalibrated by RC, haven't been used since)
full 3" exhaust with test pipe
Turbonetics t3 turbo
Top mount manifold for KA24DE
Limited edition Personal black suede with blue stitching steering wheel(new in box)
NRG short hub(new in box)
NRG quick release(new in box)
Volk EVO III wheels 17x8.5 and 9.5 +35 with good tires on them. Silver face with polished lip.
In the car:
Built KA24DE shortblock from a 93
Wiseco 9:1 pistons
Eagle H-beam rods
ARP head and rod studs
Almost new Corbeau FX1 pro seat
Nagisa Super low rails (6'0") Plenty of head clearance from roof
Enthalpy Stage 1 clutch
Stock trans
K sport coilovers
MSD blaster coil
Or you can buy all of these parts with the freshly painted shell with pignose lip for 2500$. which includes all of this plus parts listed above:
Engine:
'93 KADE-T (approx. 16,000 miles since rebuild, previous owner)
Weisco 9:1 pistons (0.20" overbore)
Eagle H-beam Rods
ARP Head, Rod Studs
Cometic 0.040" MLS head gasket
Block and head decked
Circuit Sports Turbo Elbow
Custom 2.5" IC Piping
Z32 Mass air flow sensor
Project Nissan Top feed fuel rail
RC 550cc high impedance fuel injectors
Mallory 1:1 FPR
Z32 fuel filter
MSD Blaster Coil
3" exhaust with test pipe
3" cat back exhaust and muffler
Enthalpy Ecu Tune
EXEDY Stage 1 Clutch
Suspension:
Ksport coilovers
Megan RUCAs
Megan Rear Toe arms
Welded rear diff (dont consider a selling point, but thought I would mention it)
Interior:
Full, clean, black interior w/ original floor mats
Corbeau FX1 Pro seat, faded pretty bad..
Nagisa Super low rails (6'0") Plenty of head clearance from roof
Pro Sport Boost gauge
Pioneer CD player
Trunk battery re-location
DOHC cluster
Ect:
Has power steering
No A/C
ALSO WOULD ACCEPT TRADES ON OTHER CARS, I WILL/CAN ADD CASH OF COURSE.
I'm at college currently so can't take pictures until next week. Here are some pictures of the car before I tore it down.
Also these are the wheels on the car I bought them off of.
http://i.imgur.com/CpQhk.jpg
http://i.imgur.com/NEzth.jpg
http://i122.photobucket.com/albums/o275/turbodreams954/17892180_l.jpg
http://i122.photobucket.com/albums/o275/turbodreams954/17892159_l.jpg
Off the car:
Ported and polished KA24DE head from a 93.
Z32 MAF
RC 550cc injectors
Project Nissan Top feed fuel rail
RC 950cc injectors (just recalibrated by RC, haven't been used since)
full 3" exhaust with test pipe
Turbonetics t3 turbo
Top mount manifold for KA24DE
Limited edition Personal black suede with blue stitching steering wheel(new in box)
NRG short hub(new in box)
NRG quick release(new in box)
Volk EVO III wheels 17x8.5 and 9.5 +35 with good tires on them. Silver face with polished lip.
In the car:
Built KA24DE shortblock from a 93
Wiseco 9:1 pistons
Eagle H-beam rods
ARP head and rod studs
Almost new Corbeau FX1 pro seat
Nagisa Super low rails (6'0") Plenty of head clearance from roof
Enthalpy Stage 1 clutch
Stock trans
K sport coilovers
MSD blaster coil
Or you can buy all of these parts with the freshly painted shell with pignose lip for 2500$. which includes all of this plus parts listed above:
Engine:
'93 KADE-T (approx. 16,000 miles since rebuild, previous owner)
Weisco 9:1 pistons (0.20" overbore)
Eagle H-beam Rods
ARP Head, Rod Studs
Cometic 0.040" MLS head gasket
Block and head decked
Circuit Sports Turbo Elbow
Custom 2.5" IC Piping
Z32 Mass air flow sensor
Project Nissan Top feed fuel rail
RC 550cc high impedance fuel injectors
Mallory 1:1 FPR
Z32 fuel filter
MSD Blaster Coil
3" exhaust with test pipe
3" cat back exhaust and muffler
Enthalpy Ecu Tune
EXEDY Stage 1 Clutch
Suspension:
Ksport coilovers
Megan RUCAs
Megan Rear Toe arms
Welded rear diff (dont consider a selling point, but thought I would mention it)
Interior:
Full, clean, black interior w/ original floor mats
Corbeau FX1 Pro seat, faded pretty bad..
Nagisa Super low rails (6'0") Plenty of head clearance from roof
Pro Sport Boost gauge
Pioneer CD player
Trunk battery re-location
DOHC cluster
Ect:
Has power steering
No A/C