kid_nissan
02-17-2004, 03:03 PM
Ok, Well for about a year my A/C Console Lights were out.
me being to lazy to fix this, thinking it would be a time consuming Job i decided to fix it today. It was easier then i thought.
Step 1: Remove The Center Bezel.
Step 2: Then Unscrew the A/C console and the Radio Console.
bring a/c console down. I was unable to just slide it out.
Step 3:Look at the stop of the A/C Console you will see a black clip.
http://www.streetneeds.com/ttnet/up/step 1.JPG
Step 4: Unscrew the little screw so u can pop up the black clip.
http://www.streetneeds.com/ttnet/up/step 2xxx.JPG
Step 5: You will see to little clips (Grey and Black) Tighten them with a flat head CAREFULLY as tight as it will go.(without breaking them)
http://www.streetneeds.com/ttnet/up/Step 3xxxx.JPG
Step 6: Put Black clip down and screw in the tiny screw. Then Put bezel Back on and it should work.
How I tested b4 i put everything back was put a sweater on ur head covering the ac console making it dark then put the lights on and it should light up.(i did the swater thing cause it was daytime)
If any1 has any additional question feel free to ask me
me being to lazy to fix this, thinking it would be a time consuming Job i decided to fix it today. It was easier then i thought.
Step 1: Remove The Center Bezel.
Step 2: Then Unscrew the A/C console and the Radio Console.
bring a/c console down. I was unable to just slide it out.
Step 3:Look at the stop of the A/C Console you will see a black clip.
http://www.streetneeds.com/ttnet/up/step 1.JPG
Step 4: Unscrew the little screw so u can pop up the black clip.
http://www.streetneeds.com/ttnet/up/step 2xxx.JPG
Step 5: You will see to little clips (Grey and Black) Tighten them with a flat head CAREFULLY as tight as it will go.(without breaking them)
http://www.streetneeds.com/ttnet/up/Step 3xxxx.JPG
Step 6: Put Black clip down and screw in the tiny screw. Then Put bezel Back on and it should work.
How I tested b4 i put everything back was put a sweater on ur head covering the ac console making it dark then put the lights on and it should light up.(i did the swater thing cause it was daytime)
If any1 has any additional question feel free to ask me