mwilloughby87
06-20-2012, 10:19 AM
Name: Matt Willoughby
Location: Smyrna
Contact: Post or PM
Prices: Listed
Description: See Below
Fastest way for a response is email..... mwilloughby87 at gmail. com
Here is a link to all the pictures....
https://www.dropbox.com/sh/4kxd6gd22rqb45h/DZqtXVDNk9
All of these prices were made with little to no thought input put into them....if something seems high, make an offer......if something seems to low....give me more money for it.
http://i1001.photobucket.com/albums/af134/mwilloughby87/2012-06-16170553.jpg
Shifter for r154 (not sure if it is a short shifter or not) Comes with new plastic shifter bushing and 5 Speed knob off of a Mazda that is in mint condition (black and grey)
$100 (SOLD)
GE Oil Cooler for those not wanting to run coolant around the back of a block on a 2JZGTE
$25
Stock 2JZ Cam gears....surface rust....would go great for those who would to buy Moody's broken parts and have a broken ass 2jz.....
$6 a piece or $10 for both
Some kind of washers needed when freshening up your r154...just fuckin with ya, they are used with the clutch release hub kit if your shits old an worn...includes everything except the clutch hub
$25
R154 Clutch Slave Cylinder Brand New purchased from drift motion (Welcome to Driftmotion! (http://store.driftmotion.com/static/i-clutchslavecylinderr154.php))
$30 bucks
Nissan 5/8 Clutch Master Cylinder used and unknown condition
$25 bucks
H22 Valve Cover
$40 bucks
SR20 Coil Pack covers
2 plastic $10 each
2 Aluminum ones $25 each (one is powdercoated red)
SR/KA engine mount
$5 bucks
The thing with the wire coming from it is a universal AC port for phone chargers, etc...
$5
Z32 Fuel Filter and bracket
$7
GTE Throttle Cable....modified for s14, but could probably still work on a poopra
$20
Next set of ish....
http://i1001.photobucket.com/albums/af134/mwilloughby87/2012-06-16170613.jpg
FMIC Black on one side and Silver on the other....few bent fins, typical use
31x12x4
$50
4 Inch turbo Intake....has nipples and shit for your catch can setup
$10 bucks
2JZGTE Plastic Valve Cover....broken on the part that covers the cam gears, but the top part is still great....perfect for you shit heads that are cooler than Chris Moody and actually run aftermarket cam gears
$25
Rear Brake Lines for z32 brakes on an S Chassis
$35
Some Misc. Sensor off of a 2JZGTE...just kiddin, its a TPS
$20 bucks.....buy it and say you own shit from a 2JZ part number 89452-33010
-6an Push Loc Fittings 2 straights and a 90
$9 each or $25 for all 3
Samco Radiator Hose for a 2JZ....should work on any fucking thing with a 2jzgte.....bottom one has been shortened a bit on the block side to fit a 240, but should work still on other applications
$75
3 T bolt clamps 3"
$2 each of $5 for all 3
Valve stem caps that have a nissan emblem....
Free to the first person to buy shit off this ad....or if you insist on buying them, $5
http://i1001.photobucket.com/albums/af134/mwilloughby87/2012-06-16170637.jpg
2 transmission mounts for r154 into an s chassis....
$50 for the one without rubber mount
$60 for the one with
http://i1001.photobucket.com/albums/af134/mwilloughby87/2012-06-16170925.jpg
Front brake rotors for a 350z ....never been used, but a bit of surface rust from sitting....these are for a NON BREMBO model
http://i1001.photobucket.com/albums/af134/mwilloughby87/2012-06-16171738.jpg
Mishimoto Radiator for an s14 with sr swap....used but still in good condition
$175
This is my for sale bench.....buy this shit so the for sale bench can turn into a work bench.....thank you.
http://i1001.photobucket.com/albums/af134/mwilloughby87/2012-06-16170658.jpg
Location: Smyrna
Contact: Post or PM
Prices: Listed
Description: See Below
Fastest way for a response is email..... mwilloughby87 at gmail. com
Here is a link to all the pictures....
https://www.dropbox.com/sh/4kxd6gd22rqb45h/DZqtXVDNk9
All of these prices were made with little to no thought input put into them....if something seems high, make an offer......if something seems to low....give me more money for it.
http://i1001.photobucket.com/albums/af134/mwilloughby87/2012-06-16170553.jpg
Shifter for r154 (not sure if it is a short shifter or not) Comes with new plastic shifter bushing and 5 Speed knob off of a Mazda that is in mint condition (black and grey)
$100 (SOLD)
GE Oil Cooler for those not wanting to run coolant around the back of a block on a 2JZGTE
$25
Stock 2JZ Cam gears....surface rust....would go great for those who would to buy Moody's broken parts and have a broken ass 2jz.....
$6 a piece or $10 for both
Some kind of washers needed when freshening up your r154...just fuckin with ya, they are used with the clutch release hub kit if your shits old an worn...includes everything except the clutch hub
$25
R154 Clutch Slave Cylinder Brand New purchased from drift motion (Welcome to Driftmotion! (http://store.driftmotion.com/static/i-clutchslavecylinderr154.php))
$30 bucks
Nissan 5/8 Clutch Master Cylinder used and unknown condition
$25 bucks
H22 Valve Cover
$40 bucks
SR20 Coil Pack covers
2 plastic $10 each
2 Aluminum ones $25 each (one is powdercoated red)
SR/KA engine mount
$5 bucks
The thing with the wire coming from it is a universal AC port for phone chargers, etc...
$5
Z32 Fuel Filter and bracket
$7
GTE Throttle Cable....modified for s14, but could probably still work on a poopra
$20
Next set of ish....
http://i1001.photobucket.com/albums/af134/mwilloughby87/2012-06-16170613.jpg
FMIC Black on one side and Silver on the other....few bent fins, typical use
31x12x4
$50
4 Inch turbo Intake....has nipples and shit for your catch can setup
$10 bucks
2JZGTE Plastic Valve Cover....broken on the part that covers the cam gears, but the top part is still great....perfect for you shit heads that are cooler than Chris Moody and actually run aftermarket cam gears
$25
Rear Brake Lines for z32 brakes on an S Chassis
$35
Some Misc. Sensor off of a 2JZGTE...just kiddin, its a TPS
$20 bucks.....buy it and say you own shit from a 2JZ part number 89452-33010
-6an Push Loc Fittings 2 straights and a 90
$9 each or $25 for all 3
Samco Radiator Hose for a 2JZ....should work on any fucking thing with a 2jzgte.....bottom one has been shortened a bit on the block side to fit a 240, but should work still on other applications
$75
3 T bolt clamps 3"
$2 each of $5 for all 3
Valve stem caps that have a nissan emblem....
Free to the first person to buy shit off this ad....or if you insist on buying them, $5
http://i1001.photobucket.com/albums/af134/mwilloughby87/2012-06-16170637.jpg
2 transmission mounts for r154 into an s chassis....
$50 for the one without rubber mount
$60 for the one with
http://i1001.photobucket.com/albums/af134/mwilloughby87/2012-06-16170925.jpg
Front brake rotors for a 350z ....never been used, but a bit of surface rust from sitting....these are for a NON BREMBO model
http://i1001.photobucket.com/albums/af134/mwilloughby87/2012-06-16171738.jpg
Mishimoto Radiator for an s14 with sr swap....used but still in good condition
$175
This is my for sale bench.....buy this shit so the for sale bench can turn into a work bench.....thank you.
http://i1001.photobucket.com/albums/af134/mwilloughby87/2012-06-16170658.jpg