Z32 rear rotor upgrade?

[eek]

Anyone have any more info on this? Anyone here in the states sell anything like this or know how to get a set?

http://www.global-z.com/nissan_sumitomo_r350/nissan_350.html

All I know is that is allows you to run a 350mm rear rotor on your existing z32/r32/r33/r34 rear drum setup. I searched some GT-R forums and it seems semi-popular. From what I kinda followed it allows you to bolt on the 370z/G37S rear rotor while keeping your z32 rear caliper.

[Nintensity]

I'm interested in this as well.

[Drift95silvia]

autobrakeworks.com (http://www.autobrakeworks.com)

240SX S13 S14 BRAKE UPGRADE BRACKET ADAPTER 12.75" 350Z ROTOR | eBay (http://www.ebay.com/itm/240SX-S13-S14-BRAKE-UPGRADE-BRACKET-ADAPTER-12-75-350Z-ROTOR-/261045715476?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item3cc7898214&ssPageName=RSS:B:SHOP:US:101#ht_1401wt_1396)

Try these links

[eek]

If you didn't read, the link you posted is for the FRONT. I POSTED a link that has brackets about the REAR. I already know of the 350z FRONT rotor upgrade.

[Drift95silvia]

CZP 300ZX 12.75inch Upgrade Adapter Kit - Nissan performance parts (http://www.conceptzperformance.com/Cart/description.php?II=881&Car_Type=300&UID=2012061910205874.10.248.245)

Here is what you need for the rears!!

[2muchboost]

I have these on my front and they are huge compared to stock z32 rotors. I measured 12.75' rotors once I got my adapters on the front installed. I wonder how the setup will work for the rear.....??????

[kouki-gymkhana]

Also interested in REAR rotor upgrades as I'm planning on mounting a 355mm rotor on the front, probably with 6 piston wilwoods or stoptechs. It would be atrocious to have so much rotor up front and have puny z32 rotors in the rear.

[eek]

CZP 300ZX 12.75inch Upgrade Adapter Kit - Nissan performance parts (http://www.conceptzperformance.com/Cart/description.php?II=881&Car_Type=300&UID=2012061910205874.10.248.245)

Here is what you need for the rears!!

That is for the front. Anyhow I'm going to look into trying to get my buddy who works at a cnc place and see how hard it would be to make these brackets.

[2muchboost]

Not sure what you mean by atrocious because I have ridden in my friends S14 with the same setup (z32 30mm front with Z33 rotors and Z32 rear calipers and rotors).....only difference was how fast the heat dissipated from the fronts compared to the rears.