199240sxcoupe
06-17-2012, 01:59 PM
i am mostly testing water on my swap but will sell for the right price i have lost my job but i am not in a rush to sell it and will not sell to a lowball offer.
i bought the motor back in march or so from n3cronomicon we did a compresssion test on it before i bought it and the numbers were solid straight across the board they were between 160-165 all across. motor pulls strong as fuck and previous owner and people that have been around this motor can vouch for it.
oil pressure at idle after it warmed up is between 20-25psi
newer boosted over 10psi and before that it was never boosted over 5 psi i only ran it at 10 psi for like 2 week till i hit the wall at hmp.
the transmission has redline mt90 which is gl4 so the syncros arent ate to fuck.
redtop sr with a s14 bb t28
isis stainless steel oil lines and coolant lines
megan racing manifold
new 7 layer metal exhaust manifold gasket
megan racing downpipe
isis 3 inch turbo outlet
new bosch o2 sensor "skinny"
greddy rocker arm stoppers
competition clutch stage 4 unsprung. broken in right. 1000 miles if that on the clutch pilot bearing and throw out bearing also replaced
new belts
synthetic oil changes with amsoil 10w40
stock 370cc injectors
new 300zx fuel filter
brand new bkr7e plugs
isis silicone rad hoses
swap it prewired for a dohc shell ready to drop it
the swap includes
koyo radiator
the wiring harnesses
fmic it may need the hot pipe since i put it in the wall on that side.
ecu # 62
ignitor
maf
motor mounts transmount
oil catch can
5 speed non abs s13 driveshaft
it will be everything you need to drop it in and get it running.
if i have left anything out i will add it as i remember it
i have reciepts for everything i bought for it and i can show you them if you need to see them.
with that being said on to the pics..
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0281.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0233.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0229.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0234.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0193.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0185.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0191.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0159.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0157.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0156.jpg
and this is the only video i have of it running
Slip&Slide Crash HMP June 1st 2012 - YouTube (http://www.youtube.com/watch?v=aPr_dGeEeSM)
price is 2500 firm but i am negotiable
not parting anything out so dont ask
i bought the motor back in march or so from n3cronomicon we did a compresssion test on it before i bought it and the numbers were solid straight across the board they were between 160-165 all across. motor pulls strong as fuck and previous owner and people that have been around this motor can vouch for it.
oil pressure at idle after it warmed up is between 20-25psi
newer boosted over 10psi and before that it was never boosted over 5 psi i only ran it at 10 psi for like 2 week till i hit the wall at hmp.
the transmission has redline mt90 which is gl4 so the syncros arent ate to fuck.
redtop sr with a s14 bb t28
isis stainless steel oil lines and coolant lines
megan racing manifold
new 7 layer metal exhaust manifold gasket
megan racing downpipe
isis 3 inch turbo outlet
new bosch o2 sensor "skinny"
greddy rocker arm stoppers
competition clutch stage 4 unsprung. broken in right. 1000 miles if that on the clutch pilot bearing and throw out bearing also replaced
new belts
synthetic oil changes with amsoil 10w40
stock 370cc injectors
new 300zx fuel filter
brand new bkr7e plugs
isis silicone rad hoses
swap it prewired for a dohc shell ready to drop it
the swap includes
koyo radiator
the wiring harnesses
fmic it may need the hot pipe since i put it in the wall on that side.
ecu # 62
ignitor
maf
motor mounts transmount
oil catch can
5 speed non abs s13 driveshaft
it will be everything you need to drop it in and get it running.
if i have left anything out i will add it as i remember it
i have reciepts for everything i bought for it and i can show you them if you need to see them.
with that being said on to the pics..
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0281.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0233.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0229.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0234.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0193.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0185.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0191.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0159.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0157.jpg
http://i129.photobucket.com/albums/p208/bigboi6024/IMAG0156.jpg
and this is the only video i have of it running
Slip&Slide Crash HMP June 1st 2012 - YouTube (http://www.youtube.com/watch?v=aPr_dGeEeSM)
price is 2500 firm but i am negotiable
not parting anything out so dont ask