PDA

View Full Version : No bov sound


Srjustin
06-16-2012, 05:34 PM
Heu guys got my sr20det in the road. I noticed when i hit boost and let off gas i do not hear the bov. I have a hks ssqv 4 the vacum for it goes to a tee to my wastegate and the other side to the throttle body. Is this right?

millsaps
06-16-2012, 06:06 PM
does it continue to build boost. like you do a no lift shift?

satal95
06-16-2012, 06:16 PM
Same thing is happening to me where do u have your bov placed?

Srjustin
06-16-2012, 07:05 PM
Its on the hot pipe up top by the intake. And no it drives in vac and when i get on it it will boost and if i let off it comes back down.

Srjustin
06-16-2012, 07:08 PM
Also my windows dont go down lol. Think i just cant hear it becuase of that?

blksylv
06-16-2012, 07:12 PM
do you hear any compressor surge? usually they're pretty loud when they open. i can clearly hear mines even when the windows are up . is it recirc'd?

Srjustin
06-16-2012, 08:15 PM
No its not recurulated and i dnt think i have compresser surge whats it sound like or do? But i do not beleave i do.

Chaluska
06-17-2012, 08:38 AM
blah blah blah.... the vacum for it goes to a tee to my wastegate and the other side to the throttle body

no. hook up the vacuum to the fuel pressure reg. mot the wastegate... it needs vacuum source not boost

jbretz
06-17-2012, 09:16 AM
no. hook up the vacuum to the fuel pressure reg. mot the wastegate... it needs vacuum source not boost

dont use the fpr line. there should be plenty of spare vacuum lines on the im that wont cause any issues if the line pops off.

If using the fpr line and the line comes off or gets a pinhole, its gonna cause issues.

Srjustin
06-17-2012, 11:09 AM
Ok so i run the bov to the thottle body. But where do i run my waste gate that wont cause harm or problems?

andrew600
06-17-2012, 11:10 AM
So much stupid in this thread.