Auto KA to Manual SR swap?

[CharCharXD]

What are some things I need to do this swap? Does the auto ka driveshaft work for a 5 speed sr? & Where can I find the parts? Thanks in advanced. :)

[92SEric240sx]

To to a junk yard I'f your sr is already with a 5 speed you will need a manual driveshaft, clutch pedal, clutch master and slave cylinders, 5 speed crossmember, shifter. Run a brake line from the master to the slave cylinder

[Nickys13]

Brake pedal, clutch master cylinder... Then if you don't want to die from fumes, a shift boot... and don't forget you have to jump two wires that tells your car its always in park so it starts because its an auto chasis.

Try doing research instead of starting a thread bro. Auto to manual isn't a new thing.

[Silentoreo34]

240sx manual transmission swap (http://www.nicoclub.com/archives/automatic-transmission-manual-swap.html)

ppl part out cars all the time on here and also sell the the kit as a whole.

[240zach]

yeah all you need is clutch master, clutch pedal, brake pedal ( you can cut your auto one and it will be fine) and clutch hardline, then u can just delete the clutch damper box by running hardline to soft line, then a ds and your good.
and you want that rubber boot and metal ring. its so nice to not have a hole in your cabin to where you can stare at the ground. lol

[overpaid4myfc]

it shouldn't be that bad, just make sure you have all the right parts