DFW: RB26 Head & Block, Single Turbos, Clutch, Etc...

[itsguyguy]

Located in DFW.


Making room in my garage, getting rid of things I won't be using any time soon or anymore.



Paypal or cash preferred.


I'll have some pictures up whenever I have time to take them.




Shipping is optional but will be covered by buyer. If shipping prices are ridiculous, I can chip in.


$OLD
R33 RB26DETT Block/Crank/Girdle
ARP Main Studs
87MM Bore
Decked


$1100 complete or
R33 RB26DETT Head $700 Head is cleared for high lift cams @ 11.3, Resurfaced
HALF WAY PORTED, decided to stick with 260/260 low clearance
Coolant ports in head are CNC machined to remove casting flaws in the coolant ports where they mate to the block.
280/280 GREX Cams $500
TI Ferrea valve springs, retainers and pedestals$600

$1350
PT7175 Journal Bearing Turbo .96AR
T4 Antisurge
Less than 50 miles, practically brand new

$500
PT6765 Journal Bearing Turbo .63/64? AR
T4 Antisurge
(Needs rebuild, shaft play when you pull)

$OLD
Apexi Power FC D Jetro for RB26DETTThe Apexi Power (http://zilvia.net/f/#) FC D-Jetro runs MAP, not MAF, and comes with everything needed to plug in, including the hand held commander. For the R32-R33 RB26DETT motor.







$900
SSR Type C 5x120
(2)18x9.5 +35 in glossy black
305/35/18 Mickey Thompson Street ET II's with about 60% left
Perfect for your M3, M5, M6 or Chevy!


$900
ACT Street Clutch for RB25/26 + Nismo Flywheel
(less than 1000 miles)



Everything listed is pretty much setup for the 550-700WHP range (16lbs-28lbs), after you get aftermarket pistons/rods/oil pump and N1 water pump with a decent sized turbo.




Pictures of what I have available as of right now, the rest are at the shop.



http://img.photobucket.com/albums/v499/itsguyguy/IMG_1538.jpg (http://img.photobucket.com/albums/v499/itsguyguy/IMG_1538.jpg)

http://img.photobucket.com/albums/v499/itsguyguy/IMG_1543.jpg (http://img.photobucket.com/albums/v499/itsguyguy/IMG_1543.jpg)


http://img.photobucket.com/albums/v499/itsguyguy/IMG_1547.jpg (http://img.photobucket.com/albums/v499/itsguyguy/IMG_1547.jpg)

http://img.photobucket.com/albums/v499/itsguyguy/IMG_1548.jpg (http://img.photobucket.com/albums/v499/itsguyguy/IMG_1548.jpg)

http://img.photobucket.com/albums/v499/itsguyguy/IMG_1550.jpg (http://img.photobucket.com/albums/v499/itsguyguy/IMG_1550.jpg)

http://img.photobucket.com/albums/v499/itsguyguy/IMG_1552.jpg (http://img.photobucket.com/albums/v499/itsguyguy/IMG_1552.jpg)

http://img.photobucket.com/albums/v499/itsguyguy/IMG_1554.jpg (http://img.photobucket.com/albums/v499/itsguyguy/IMG_1554.jpg)

http://img.photobucket.com/albums/v499/itsguyguy/IMG_1557.jpg (http://img.photobucket.com/albums/v499/itsguyguy/IMG_1557.jpg)


http://img.photobucket.com/albums/v499/itsguyguy/IMG_1561.jpg (http://img.photobucket.com/albums/v499/itsguyguy/IMG_1561.jpg)

http://img.photobucket.com/albums/v499/itsguyguy/IMG_1569.jpg (http://img.photobucket.com/albums/v499/itsguyguy/IMG_1569.jpg)






If you are more than 50 miles away, I wouldn't consider meeting half way to sell anything less than $2000, because it would be a waste of time on both of our ends. Locals are preferred unless you want to ship, just remember Paypal charges 2.9% on top (Thanks Migit240sx, I went by what most people charged me. I forgot that this is Zilvia and the 1.1% makes a big difference) of the pricing after shipping/actual items.








Let's get all this stuff moving! Do what you gotta do to get these parts!

[itsguyguy]

Nobody wants good parts for a fraction of the cost?!

Get this stuff moving for more funds towards the four digit S14 build!

[BrokenWhite240]

What's the deal with those s14 door panel with the bride fabric?

[garyklovesla]

yooo that ecu do u still have it?

[itsguyguy]

Door panels are spares and not for sale.



If you want the ECU, I can swing by the shop and pick it up and get it ready to ship.

The current MAP tune is at 16lbs/8500 for an RB26 with studs, springs, retainers and supporting BPU.

[itsguyguy]

The 98 is gone, let's get this stuff gone, too!

[itsguyguy]

There has to be somebody out there that wants to build an RB26 up.

[240sxConvert]

I can vouch for the seller as I bought the gold s13 you see as his avatar...awesome guy good luck with the sell...

[chank11721]

sell me your door panels....this is chinaman... with love from china <3

[dcreech0]

You firm on the price of block and head? I am looking for a good 26 to start a build on. What all is included?

[boniomario]

sell me your door panels....this is chinaman... with love from china <3

china man stop cramping up his thread from China

this is Omar from Turkey LOL

[s13_rb25]

Wish you had all 4 of those 5x120 ssr's.

[Boost-Fiend]

Would u happen to have rb26 valve covers?

[itsguyguy]

I can vouch for the seller as I bought the gold s13 you see as his avatar...awesome guy good luck with the sell...


Hey boss, I'm glad that you're putting her to good use and enjoying her.


Last I saw, you swapped the motor and put in cruise control, correct?
Did you ever fix the AC?

[elguapo260sx]

who ported the head? micheal j fox?

[t's!]

those Willans harnesses for sale? im in N. Dallas

[slim_240]

bump for youuuuu

help this man get over 200mph!!

[garyklovesla]

still got ecu?

[itsguyguy]

It's still here, sitting in a box at my friend's house.


Two people are asking about it, but doubt anyone will pull the trigger anytime soon.

[garyklovesla]

price still same?

[itsguyguy]

Price is still the same. Not really in a rush to sell, but if someone wants to save a couple hundred bucks, they can pick mine up.

[itsguyguy]

ECU and PT7175 are taken off the list.

To the top.

[RB25GUY]

would you sell the gtr stock intake manifold with the itbs if you still have it?

[itsguyguy]

I may not have the ITB's, but I have to look.

Sure, you can get the stock intake manifold if you pay for shipping.
Name your price and I'll think about it.

[ryandh]

1100 for complete head and block?!?! or am i reading that wrong

[itsguyguy]

Ryandh, you read it wrong.

[j2fast]

hit me up im still interested in some stuff

[itsguyguy]

Hey J2fast, everything is still here until maybe end of summer. If nothing gets pushed out, I'm going to piece everything together for another built RB26 and just throw it in a beater to have fun with on the streets.

[itsguyguy]

Updated, bump to the top!

[Migit240sx]

Don't know where you're getting that 4%

https://www.paypal.com/webapps/mpp/paypal-fees

[itsguyguy]

Block and Apexi Power FC are gone, let's get the rest of this gone.

Thank you Migit240sx for the clear up, I went by what most people charged me.
I forgot that some of us cannot afford the 1.1% charge.