cheap! s13 max angle modded steering knuckles!

[MC.Understeer]

City:Lynnwood/Seattle
State/Province:WA
Price:$200
Item Description: Set of modded s13 knuckles. Looking for $200 plus your stock knuckles or $350 without
http://i49.photobucket.com/albums/f286/vr_sex/IMG_20120611_220919.jpg
http://i49.photobucket.com/albums/f286/vr_sex/465715_398363973548296_1421266041_o.jpg

[future]

You need to start making s14 ones for us who have s14 fve lug

[MC.Understeer]

:squint:You need to start making s14 ones for us who have s14 fve lug

These fit s14 also. I have s14 5 lug on my car.

[MC.Understeer]

bump!! still for sale!

[EvoVIII808]

*Free Bump*
How's The Ride After GR? Make Bash Bars by any chance?

[future]

If its a s13 arm it will not fit a s14 lower control arm unless you have the s14 ball joint

[MC.Understeer]

*Free Bump*
How's The Ride After GR? Make Bash Bars by any chance?

Fine, I was drifting this weekend at Bremerton motorsports park. I already had a bash bar. Just need to weld on a new corner that isnt bent. Already got a new headlight.

[EvoVIII808]

Fine, I was drifting this weekend at Bremerton motorsports park. I already had a bash bar. Just need to weld on a new corner that isnt bent. Already got a new headlight.

Nice!! Good to see you back in the game.

*BUMP*
Someone pick these up already!

[MC.Understeer]

Nice!! Good to see you back in the game.

*BUMP*
Someone pick these up already!


Knuckles in action!!

Jeff Woodruff/ Raw/ GCMedia - YouTube (http://www.youtube.com/watch?v=1CQRMxVoOO8&feature=youtu.be)

[MC.Understeer]

Still have these..

[ch1873857]

just want to point out the massive amount of undercut on that weld. i sure as hell wouldnt trust it..

[MC.Understeer]

just want to point out the massive amount of undercut on that weld. i sure as hell wouldnt trust it..

I've tapped a wall, bent the lip on my ccws, bent my inner tie rod with these knuckles and nothing happen to the knuckles so please keep your poor judgements based on a picture to yourself.

[xoxide]

Take what he says with a grain of salt, he thinks everyone is inferior to him when it comes to welding.

On topic, I would definetly be interested in getting a set in a few weeks... ill be sending you a PM shortly.

[ch1873857]

I've tapped a wall, bent the lip on my ccws, bent my inner tie rod with these knuckles and nothing happen to the knuckles so please keep your poor judgements based on a picture to yourself.

poor judgement.. :hahano:

WHO welded these. They clearly are doing it wrong. SORRY. Truth be told, you aren't happy at the fact someone called it out. :2c:

[ch1873857]

Take what he says with a grain of salt, he thinks everyone is inferior to him when it comes to welding.

On topic, I would definetly be interested in getting a set in a few weeks... ill be sending you a PM shortly.

Your a fuckin winner. I critique my own welds even more than I do others. I'm always learning from other people and there is always room for improvement.

I made a simple observation. As a matter of fact. I never welded on the cast steel the knuckles are made of. wasnt comfortable with my OWN work to do it myself. So I had Cody Toby do mine. You better believe I inspected that shit when I got it. It was money. I spent the extra cash on confidence that someone who was more experienced with the job would in the end save me from hitting a wall.

Everyone that looks at this thread has the right to know that those are substandard welds and WILL fail faster and easier than the same knuckle welded by someone that knows what there doing. Sorry you couldnt handle it.

I wont go into detail on the severity of undercut. Google it. But it goes to show you the comment xoxoide or whatever made is true, not to me, but the OP.

Dont get butthurt because you need a little more practice..

[jdmfan13]

It's getting hot in heres .......nice

[MC.Understeer]

Your a fuckin winner. I critique my own welds even more than I do others. I'm always learning from other people and there is always room for improvement.

I made a simple observation. As a matter of fact. I never welded on the cast steel the knuckles are made of. wasnt comfortable with my OWN work to do it myself. So I had Cody Toby do mine. You better believe I inspected that shit when I got it. It was money. I spent the extra cash on confidence that someone who was more experienced with the job would in the end save me from hitting a wall.

Everyone that looks at this thread has the right to know that those are substandard welds and WILL fail faster and easier than the same knuckle welded by someone that knows what there doing. Sorry you couldnt handle it.

I wont go into detail on the severity of undercut. Google it. But it goes to show you the comment xoxoide or whatever made is true, not to me, but the OP.

Dont get butthurt because you need a little more practice..

First off I didn't weld these, Second that fact you're making an assumption off a crappy cell phone picture at an over viewing angle is outright stupid. Not only have I crash tested these myself but along with a few other locals that run these same knuckles for over 2 years now without any issue hold a lot more ground then you're opinion over the internet. Find something better to do than make opinions about someone else's welds on the internet.

[iJDM]

I really don't think its that bad of a weld, the shadows just make it look worse than it actually is

[thursdaymike]

I'd rather have undercut than cold lap! Facts! At least you know with under cut that ther is penetration. Plus these things are made of cast to begin with. Thousands of little air bubbles. I'm sure the weld strength is strong enough to do the job. U should start selling your own if u don't like. But cnc'd from billet bro. If it does the job, you can't argue. Could it be better, yes. Does it work yes. Survived a crash into a wall, speaks for itself.

[zerodameaon]

So if you sell these will you be making more to sell on here?

[Drifting Kalamari]

Looks good, GLWS!

[Toi]

GLWS Op, even though this turned into the "My Precious Welds" debate.......

[TheRealSy90]

Can I get a top-down pic of them so I can see how much ackerman and how shortened the arms are?

[ch1873857]

well this just turned into a big bag of ignorance. wont even waste my time.

why dont i sell my own? Liability.. why dont make anything for 240s to sell anymore? broke ass 240 owners. and the fact that ive been testing the 1/2jz mounts for bmw e46. typically bmw owners are willing to spend the extra few bucks on GOOD parts. dont wasting time with flake ass 240 owners.

[enkei2k]

bump!! still for sale!

Knuckles in action!!

Jeff Woodruff/ Raw/ GCMedia - YouTube (http://www.youtube.com/watch?v=1CQRMxVoOO8&feature=youtu.be)

Still have these..


Two bump limit. You can start a new thread in 3 days.