1996 240sx sr20det $5500

[Garber]

Name: Jason Garber
Location: Marietta, PA 17547
Contact Info: 7173333015

Year: 1996
Make: Nissan
Model: 240sx
Color: red
Mileage: 196k
Transmission: Manual

Price: $5500

Description: Im not gonna waste your time, please dont waste mine.



The bad:
-Rust on the drivers side front wheel well seam. i hit it with rustoleum when i bought the car 4 months ago to slow the rust.

-notorious s14 rear end clunk when pulling out. probably subframe bushings (collars already installed)

-sometimes hard to get out of reverse. its easy for me cause im used to it, but you have to roll the car forward slightly to get it to pop out.

- slight pulsation in the rotors during light braking.

-low speed impact with a deer. front right fender is wrinkled and hood is slightly misaligned (the damage is clear in the pictures)

-front end is resprayed, and it doesnt match very well.

-needs an alignment. in order to do a true alignment, it should have some type of aftermarket camber or toe adjustment. the stock arms dont have enough adjustment to get the rear toe in spec.

-i pulled the speed sensor out last month to use in my other s14 for tuning reasons, so it will need a new sensor for the speedo to work again.







ok, if you are still interested, read on.

this car is my daily driver. it runs great. starts right up, idles smooth, pulls strong, never let me down.

196k on the body
s13 redtop sr20det
cometic 3 layer metal headgasket
arp headstuds
greddy intake manifold
stock t25 with HKS adjustable wastegate
greddy fmic
xs-power stainless manifold
trust downpipe
trust mid pipe
hks high power exhaust
greddy type-s bov recirculated
koyo radiator
blitz turbo timer
walbro 255
electric fan
spec stage 3 clutch
kyb adjustable struts and shocks with tein springs
subframe collars
drilled rotors



the car will come on 18" 6 spoke 350z wheels, not the wheels pictures



not interested in trades, unless it is highly favorable on my end.

$5500 OBO

call or text 7173333015


http://i21.photobucket.com/albums/b290/revlimityermom/IMG_0078.jpg

http://i21.photobucket.com/albums/b290/revlimityermom/IMG_0086.jpg

http://i21.photobucket.com/albums/b290/revlimityermom/IMG_0090.jpg

http://i21.photobucket.com/albums/b290/revlimityermom/IMG_0097.jpg

http://i21.photobucket.com/albums/b290/revlimityermom/IMG_0106-1.jpg

http://i21.photobucket.com/albums/b290/revlimityermom/IMG_0111.jpg

http://i21.photobucket.com/albums/b290/revlimityermom/IMG_0114-1.jpg

http://i21.photobucket.com/albums/b290/revlimityermom/IMG_0117.jpg

http://i21.photobucket.com/albums/b290/revlimityermom/IMG_0118.jpg

http://i21.photobucket.com/albums/b290/revlimityermom/IMG_0119-1.jpg

the rust:

http://i21.photobucket.com/albums/b290/revlimityermom/Mobile%20Uploads/mms_picture_1-25.jpg

http://i21.photobucket.com/albums/b290/revlimityermom/Mobile%20Uploads/mms_picture-87.jpg

[Brandon_240]

Bump for a smexy Zenki! Glws, hope the minor flaws don't scur anybody away

[peanucklebutter]

What's up with the alignment? What are the rear toe specs?

How much rust is on the rest of the body?

Why are you selling?

[Garber]

i got it aligned and the front and right rear were all in spec and the left rear was toe in .5 degree. it made the back end wiggle around on bumps (it was worse before i aligned it.

i adjusted the toe in my garage on the rear left as far out as i could using string. i got it a little better but not perfect. the movement in the rear is gone, but the steering wheel isnt perfectly straight anymore.

not much rust anywhere else. normal surface rust on bolts and such, frame rails etc are all good as far as i remember.

im getting rid of it because i have another s14 with a built sr that should be finished this week and i want an is300

[Garber]

solddddddddd