LS240
06-08-2012, 07:24 PM
Update: Sold.
I have for sale a full OEM 180SX Type X kit without front lip, but has everything else including rear wing as well as fogs/turn signals/vents in front bumper and even the foam support and brackets. The kit is in very good condition with no cracks but will obviously need to be painted. Most parts are white but the 3 rear pieces are gray.
As far as damage goes, as you can see in the pics below the paint on the bumper is spiderwebbed from scraping and the bumper flexing but the plastic bumper did it's job and absorbed the blows. As such there are no cracks in the plastic itself. There are however two little dent/gouge things in the front bumper but they are very small and I've included pics of them so you can judge for yourself. There are some scuffs on the side skirts and endcaps but they're barely more than surface deep. All blemishes can easily be sanded and filled. Also, a few of the mounting tabs on the backside of the skirts are broken. They're all still there, just one side is cracked. Epoxy will fix them.
Enough of the negative stuff. I'm just telling you that for full disclosure. In truth, it's a solid kit in great condition that requires very little finish work to be perfect. The kit came with my S13 when I bought it but wasn't mounted. I planned on mounting and painting it but have decided instead to go with Chuki+Xenon lip for a more low key appearance, so that's my reason for selling.
Asking $1300 obo. I'm also open to trades as there are a few things I need/want. I'd like a good condition Chuki front bumper with extensions, Xenon lip, Kouki taillights, a new windshield(Colorado is rough on them), a left front fender with no dents or damage, and I'm currently running stock brakes which aren't cutting it so if you've got a better setup I'm interested. Doesn't matter if it's Z32, Q45, or whatever, just want bigger/better brakes. Keep in mind I'm 4 lug and plan to stay that way for a while so 5 lugs won't help me much. If you have any of these parts we could work out a trade with cash. I also might possibly be willing to part with the kit + some cash of my own if you've got an RB25 or 26, Toyota 1UZ, or any other engine for a swap laying around. I'm still undecided which route to take so maybe you can sway me. ;)
As for location, I live in Colorado but I will be visiting Long Beach next week. I could very easily take the kit along for the ride and deliver it anywhere in the LA area. This service would only be available from about sunday to friday of next week. Otherwise it's pick up from Grand Junction, CO or you pay for shipping.
Now that my novel is published, onto the pics:
http://img607.imageshack.us/img607/6374/510x.jpg
http://img208.imageshack.us/img208/3045/511d.jpg
http://img225.imageshack.us/img225/4609/512w.jpg
http://img163.imageshack.us/img163/1940/515j.jpg
http://img84.imageshack.us/img84/6875/514vh.jpg
http://img829.imageshack.us/img829/8084/516u.jpg
http://img84.imageshack.us/img84/9467/517w.jpg
http://img811.imageshack.us/img811/7316/518xw.jpg
I have for sale a full OEM 180SX Type X kit without front lip, but has everything else including rear wing as well as fogs/turn signals/vents in front bumper and even the foam support and brackets. The kit is in very good condition with no cracks but will obviously need to be painted. Most parts are white but the 3 rear pieces are gray.
As far as damage goes, as you can see in the pics below the paint on the bumper is spiderwebbed from scraping and the bumper flexing but the plastic bumper did it's job and absorbed the blows. As such there are no cracks in the plastic itself. There are however two little dent/gouge things in the front bumper but they are very small and I've included pics of them so you can judge for yourself. There are some scuffs on the side skirts and endcaps but they're barely more than surface deep. All blemishes can easily be sanded and filled. Also, a few of the mounting tabs on the backside of the skirts are broken. They're all still there, just one side is cracked. Epoxy will fix them.
Enough of the negative stuff. I'm just telling you that for full disclosure. In truth, it's a solid kit in great condition that requires very little finish work to be perfect. The kit came with my S13 when I bought it but wasn't mounted. I planned on mounting and painting it but have decided instead to go with Chuki+Xenon lip for a more low key appearance, so that's my reason for selling.
Asking $1300 obo. I'm also open to trades as there are a few things I need/want. I'd like a good condition Chuki front bumper with extensions, Xenon lip, Kouki taillights, a new windshield(Colorado is rough on them), a left front fender with no dents or damage, and I'm currently running stock brakes which aren't cutting it so if you've got a better setup I'm interested. Doesn't matter if it's Z32, Q45, or whatever, just want bigger/better brakes. Keep in mind I'm 4 lug and plan to stay that way for a while so 5 lugs won't help me much. If you have any of these parts we could work out a trade with cash. I also might possibly be willing to part with the kit + some cash of my own if you've got an RB25 or 26, Toyota 1UZ, or any other engine for a swap laying around. I'm still undecided which route to take so maybe you can sway me. ;)
As for location, I live in Colorado but I will be visiting Long Beach next week. I could very easily take the kit along for the ride and deliver it anywhere in the LA area. This service would only be available from about sunday to friday of next week. Otherwise it's pick up from Grand Junction, CO or you pay for shipping.
Now that my novel is published, onto the pics:
http://img607.imageshack.us/img607/6374/510x.jpg
http://img208.imageshack.us/img208/3045/511d.jpg
http://img225.imageshack.us/img225/4609/512w.jpg
http://img163.imageshack.us/img163/1940/515j.jpg
http://img84.imageshack.us/img84/6875/514vh.jpg
http://img829.imageshack.us/img829/8084/516u.jpg
http://img84.imageshack.us/img84/9467/517w.jpg
http://img811.imageshack.us/img811/7316/518xw.jpg