PeaceOnesxWai
06-08-2012, 12:16 AM
Fuck the law, fuck the police
The innocent man is once again put behind bars.
Out on bail, i have to fork out $3.5k so i have to sell whatever i have to make up for the amount before i have to go back. I also need money for attorney so time is money!!
Ill try and list whatever i have but just give me a text/call if you need updated pics or info.
Best to reach me @ (626)274-4414 Text/call
So lets start "selling off assets like im fking MJ"
Oil Breather Catch Can - $150 / $165 Shipped
An -10s bunges throughout.
http://i3.photobucket.com/albums/y55/aznnoodleboi51/FB49E27E-7745-4E3A-9396-6964EE987A68.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/969DDF00-941C-431F-A0E8-C7595F3E3B57.jpg
Earls Pro-lite -6An Lines - $80 / $85 shipped
You just need hardline to -6an converter. Then you attach a -6 AN fitting Fuel filter and run these lines to fuel rail and FRP. They are set to length already, guaranteed.
http://i3.photobucket.com/albums/y55/aznnoodleboi51/95993826-6EB0-4020-AE46-42A75BA22552.jpg
Circuit sport -10 An line from Oil filter relocate kit. $20 / $25 Shipped.
Fk i dont know how long they are, sorry..
http://i3.photobucket.com/albums/y55/aznnoodleboi51/35378118-92E2-4CA8-80C4-FE05F5FD6A20.jpg
Godspeed Type RS Coilover for S13 - Brand New - $500 / $560 Shipped
Friend ordered it, didnt want godspeed and switched to another brand.
http://i3.photobucket.com/albums/y55/aznnoodleboi51/photo.jpg
Autometer gauges - 2 with sensor lines, 2 without.
With sensors:
Oil temp - $40 / $45 Shipped
Water Temp - $40 / $45 Shipped
Without sensors:
Oil Pressure - $20 / $25 Shipped
Volt Meter - $10 / $15 Shipped
TOGETHER : $110 Shipped
http://i3.photobucket.com/albums/y55/aznnoodleboi51/D0736D8C-4498-4169-B7AC-6B9E9B352CB0.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/A520634A-C8F9-438E-B0A3-5BA1A2CE4861.jpg
HKS Style INTAKE FILTERS!! 3in and 4in Available! - $30 / $37 Shipped
http://i3.photobucket.com/albums/y55/aznnoodleboi51/10510647-6917-4730-A1C5-F4A75B5ACD3E.jpg
Turbo Blankets from Jegs.
Small blanket will fit most T2 to T3 housing turbos - $45 Shipped / $40 Picked up
( T25, T28, GT25, GT28, GT30, GT35, 18G, 20g, TD06, etc )
Large size will fit most T4 housing turbos - $55 Shipped / $50 Picked up
( GT40, GT42, GT55, T67, etc )
- Blankets will come with 2 anchor springs
- Fiberglass construction, good for 1800deg. Fahrenheit
This is the same one Jegs sells for $90!
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG-20120523-00361.jpg
Volk RE30 (http://zilvia.net/f/wheels-tires/448024-fs-ft-volks-re30-19-staggered-formula-silver.html)w/ tires - $1400 / Shipping varies, please contact me.
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0137.jpg
THIS IS FOR ( 3 ) Volk WHEELS ONLY! BUTTTT I also have x2 Rota SVNs 18x9.5 +20 offset
Specs:
x1 - 19x10 +22 Offset Front ( 1 Wheel only, Driver side )
w/ Tires - 245/35 19 93W (Minor stretch)
x2 - 19x11 +25 Offset Rear ( One side is polished )
w/ Tire - 275/35 19 100W
__________________________________________________ __________
x2 Rota SVN - 18x9.5 +20 (Hyper Black chrome) - $500 / $580 Shipped
Special ordered rotas, they dont make these offsets and i waited 2 months on them. Like new, only mounted tires and studs to see fitment, didnt like the tires so i took them off. No pic yet put shoot a text.
__________________________________________________ __________
Project Kics R40 lug nuts (Gun Metal/Gold) 12.x1.25 - $160 / $180
Shipped
Brand New
http://i3.photobucket.com/albums/y55/aznnoodleboi51/Picture005.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/Picture006-1.jpg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
:cry::cry::cry::cry::cry::cry::cry::cry::cry:
So This is my pride and joy.. Its a misfortune but im sort of glad i have this laying around to help me get through bad times. Im not 100% on selling it but objects can be replaced later on. I only wish this can be bought completely as i do not really want the setup to be parted out.
This is a FULL AN LINE CONVERSION. Its 90% complete, its only missing matching lines for the fuel rail, PS AN converted lines, and -3 brake for the bleed return. Used on motor start up.. never got tuned so this setup has about 3miles on it.
Off the top of my head.
Head:
S13.4 Hybrid Valve Cover w/ -10AN breather bunges.
Oil Breather Catch Can as listed above
x2 BMRS Nylon -10AN from Cover to Breather Tank
Water :
Outlet converted -16AN bung (Outlet has swirl pot welded on with -6AN breather on top)
Inlet converted -16AN bung (Inlet has -8AN welded for swirl pot return)
Under Manifold water line delete, Thermo housing converted to -8AN loop
x5-7 assorted length BMRS -16AN Lines, Nylon and steel braided
-16AN inline Radiator Cap (Not pictured)
MR2 3 row radiator, it is perfect for this set up (Not pictures, no -16AN on yet)
Swirl Catch Tank with -8AN return and x2 -6AN inlet on top. Radiator cap enclosure.
Oil :
Circuit sport oil relocate blocks
x3 BMRS -10AN steel braided lines for block to Filter to Cooler and back to Block.
MSC :
Chasebays -3AN in bay brake hardline conversion line
DPI -3AN Self bleeding brake fluid cooler w/ short -3AN lines attached
Aluminum power steering tank w/ -10an feed and -6AN return
BMRS -10an Steel braided line for feed, -6AN nylon for return
BMRS -6AN fuel filter
Asking $1800 for the setup I will not part.
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0579.jpg
Lastly is my shell, it is currently at a shop and was getting reinforced but lets see if i get a buyer. Its half way there into being a fully prepped car, i never got the funds to put in a proper cage but i hope next buyer does put one in. Buyer of the shell will get my list of people that can help you fabricate anything you need.
List:
Tube front end (tubing is in the same standard as FD cages)
V-Mount set up with MR2 radiator
enclosed with wheel tubs (will clean any wheels you throw at it)
rear removable bash bar
supermade body kit (tube front was designed to also fit almost any kit)
opened rear wheel arches
Good - uncracked HUD Dash/Aerodesigns Red bucket seat/Nardi Wheel/5 lug conv(not installed)/extra subframe/AC components/carpet/clean door panels/power windows
Bad - Fully gutted interior/sound deadening has not been stripped/shitty spray paint exterior/cracked windshield/stripped body harness/unfinished underdash harness(i will recommend a cheap wiring specialist)/non-op registration(its solely for track)
Asking $2000
http://i3.photobucket.com/albums/y55/aznnoodleboi51/432291_267017500045108_115739035172956_649976_9091 49567_n.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/401224_239169212829937_115739035172956_587185_9732 84818_n-1.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/380951_232824776797714_115739035172956_572149_3958 79687_n-1.jpg
Other Parts not listed:
Stance coilovers missing 1 rear. The front will fit S13 or S14. Brand new, Asking $650 / $700 shipped.
Local brand coilovers S13 and S14 - $450 / $500 shipped.
Dope coilovers, its an unknown brand but they are made by local pros and they ride soft and firm plus slam to the frame.
S13 bolt on roll cage - GSP - $350 New / $470 shipped
Greddy informeter touch - $400
S13 GSP Roll Cage - Brand new $350
2nd shell spare part out. White S13 hatch, front collision, will part any little thing if you can pick at it. Just ask what i have in it first.
Dont like what you see? Then I will get you what you need.
I have dealer accounts with almost every big name out there and also some small name brand out there. Just ask, im i need for any sale to make that dime.
You need a AEM EMS? $twelve00 Brand new (vendors here ask $1299) shhhhhhh
PFC D-jetro? $ten fifty to eleven hundred (vendors- $1300) shhhhhhhhhh
Uras style Body kit? $300
Carbon fiber hood? $350
Coilovers that slam to your mofking frame? $450
Wide fenders, over fenders, wheels, brakes, that Mugen SR25det crate motor?... ill go deep hunting that part for you..
Tomei/hks/greddy/ssr/work/volk/stance/Ohlins to Megan/gsp/cxracing... anything, just dont ask me shit when you dont have money, your wasting your own time and giving yourself despair. Also i dont to importing, so i cant get you a front clip and such, sorry.
Thank you for looking
The innocent man is once again put behind bars.
Out on bail, i have to fork out $3.5k so i have to sell whatever i have to make up for the amount before i have to go back. I also need money for attorney so time is money!!
Ill try and list whatever i have but just give me a text/call if you need updated pics or info.
Best to reach me @ (626)274-4414 Text/call
So lets start "selling off assets like im fking MJ"
Oil Breather Catch Can - $150 / $165 Shipped
An -10s bunges throughout.
http://i3.photobucket.com/albums/y55/aznnoodleboi51/FB49E27E-7745-4E3A-9396-6964EE987A68.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/969DDF00-941C-431F-A0E8-C7595F3E3B57.jpg
Earls Pro-lite -6An Lines - $80 / $85 shipped
You just need hardline to -6an converter. Then you attach a -6 AN fitting Fuel filter and run these lines to fuel rail and FRP. They are set to length already, guaranteed.
http://i3.photobucket.com/albums/y55/aznnoodleboi51/95993826-6EB0-4020-AE46-42A75BA22552.jpg
Circuit sport -10 An line from Oil filter relocate kit. $20 / $25 Shipped.
Fk i dont know how long they are, sorry..
http://i3.photobucket.com/albums/y55/aznnoodleboi51/35378118-92E2-4CA8-80C4-FE05F5FD6A20.jpg
Godspeed Type RS Coilover for S13 - Brand New - $500 / $560 Shipped
Friend ordered it, didnt want godspeed and switched to another brand.
http://i3.photobucket.com/albums/y55/aznnoodleboi51/photo.jpg
Autometer gauges - 2 with sensor lines, 2 without.
With sensors:
Oil temp - $40 / $45 Shipped
Water Temp - $40 / $45 Shipped
Without sensors:
Oil Pressure - $20 / $25 Shipped
Volt Meter - $10 / $15 Shipped
TOGETHER : $110 Shipped
http://i3.photobucket.com/albums/y55/aznnoodleboi51/D0736D8C-4498-4169-B7AC-6B9E9B352CB0.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/A520634A-C8F9-438E-B0A3-5BA1A2CE4861.jpg
HKS Style INTAKE FILTERS!! 3in and 4in Available! - $30 / $37 Shipped
http://i3.photobucket.com/albums/y55/aznnoodleboi51/10510647-6917-4730-A1C5-F4A75B5ACD3E.jpg
Turbo Blankets from Jegs.
Small blanket will fit most T2 to T3 housing turbos - $45 Shipped / $40 Picked up
( T25, T28, GT25, GT28, GT30, GT35, 18G, 20g, TD06, etc )
Large size will fit most T4 housing turbos - $55 Shipped / $50 Picked up
( GT40, GT42, GT55, T67, etc )
- Blankets will come with 2 anchor springs
- Fiberglass construction, good for 1800deg. Fahrenheit
This is the same one Jegs sells for $90!
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG-20120523-00361.jpg
Volk RE30 (http://zilvia.net/f/wheels-tires/448024-fs-ft-volks-re30-19-staggered-formula-silver.html)w/ tires - $1400 / Shipping varies, please contact me.
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0137.jpg
THIS IS FOR ( 3 ) Volk WHEELS ONLY! BUTTTT I also have x2 Rota SVNs 18x9.5 +20 offset
Specs:
x1 - 19x10 +22 Offset Front ( 1 Wheel only, Driver side )
w/ Tires - 245/35 19 93W (Minor stretch)
x2 - 19x11 +25 Offset Rear ( One side is polished )
w/ Tire - 275/35 19 100W
__________________________________________________ __________
x2 Rota SVN - 18x9.5 +20 (Hyper Black chrome) - $500 / $580 Shipped
Special ordered rotas, they dont make these offsets and i waited 2 months on them. Like new, only mounted tires and studs to see fitment, didnt like the tires so i took them off. No pic yet put shoot a text.
__________________________________________________ __________
Project Kics R40 lug nuts (Gun Metal/Gold) 12.x1.25 - $160 / $180
Shipped
Brand New
http://i3.photobucket.com/albums/y55/aznnoodleboi51/Picture005.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/Picture006-1.jpg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
:cry::cry::cry::cry::cry::cry::cry::cry::cry:
So This is my pride and joy.. Its a misfortune but im sort of glad i have this laying around to help me get through bad times. Im not 100% on selling it but objects can be replaced later on. I only wish this can be bought completely as i do not really want the setup to be parted out.
This is a FULL AN LINE CONVERSION. Its 90% complete, its only missing matching lines for the fuel rail, PS AN converted lines, and -3 brake for the bleed return. Used on motor start up.. never got tuned so this setup has about 3miles on it.
Off the top of my head.
Head:
S13.4 Hybrid Valve Cover w/ -10AN breather bunges.
Oil Breather Catch Can as listed above
x2 BMRS Nylon -10AN from Cover to Breather Tank
Water :
Outlet converted -16AN bung (Outlet has swirl pot welded on with -6AN breather on top)
Inlet converted -16AN bung (Inlet has -8AN welded for swirl pot return)
Under Manifold water line delete, Thermo housing converted to -8AN loop
x5-7 assorted length BMRS -16AN Lines, Nylon and steel braided
-16AN inline Radiator Cap (Not pictured)
MR2 3 row radiator, it is perfect for this set up (Not pictures, no -16AN on yet)
Swirl Catch Tank with -8AN return and x2 -6AN inlet on top. Radiator cap enclosure.
Oil :
Circuit sport oil relocate blocks
x3 BMRS -10AN steel braided lines for block to Filter to Cooler and back to Block.
MSC :
Chasebays -3AN in bay brake hardline conversion line
DPI -3AN Self bleeding brake fluid cooler w/ short -3AN lines attached
Aluminum power steering tank w/ -10an feed and -6AN return
BMRS -10an Steel braided line for feed, -6AN nylon for return
BMRS -6AN fuel filter
Asking $1800 for the setup I will not part.
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0579.jpg
Lastly is my shell, it is currently at a shop and was getting reinforced but lets see if i get a buyer. Its half way there into being a fully prepped car, i never got the funds to put in a proper cage but i hope next buyer does put one in. Buyer of the shell will get my list of people that can help you fabricate anything you need.
List:
Tube front end (tubing is in the same standard as FD cages)
V-Mount set up with MR2 radiator
enclosed with wheel tubs (will clean any wheels you throw at it)
rear removable bash bar
supermade body kit (tube front was designed to also fit almost any kit)
opened rear wheel arches
Good - uncracked HUD Dash/Aerodesigns Red bucket seat/Nardi Wheel/5 lug conv(not installed)/extra subframe/AC components/carpet/clean door panels/power windows
Bad - Fully gutted interior/sound deadening has not been stripped/shitty spray paint exterior/cracked windshield/stripped body harness/unfinished underdash harness(i will recommend a cheap wiring specialist)/non-op registration(its solely for track)
Asking $2000
http://i3.photobucket.com/albums/y55/aznnoodleboi51/432291_267017500045108_115739035172956_649976_9091 49567_n.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/401224_239169212829937_115739035172956_587185_9732 84818_n-1.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/380951_232824776797714_115739035172956_572149_3958 79687_n-1.jpg
Other Parts not listed:
Stance coilovers missing 1 rear. The front will fit S13 or S14. Brand new, Asking $650 / $700 shipped.
Local brand coilovers S13 and S14 - $450 / $500 shipped.
Dope coilovers, its an unknown brand but they are made by local pros and they ride soft and firm plus slam to the frame.
S13 bolt on roll cage - GSP - $350 New / $470 shipped
Greddy informeter touch - $400
S13 GSP Roll Cage - Brand new $350
2nd shell spare part out. White S13 hatch, front collision, will part any little thing if you can pick at it. Just ask what i have in it first.
Dont like what you see? Then I will get you what you need.
I have dealer accounts with almost every big name out there and also some small name brand out there. Just ask, im i need for any sale to make that dime.
You need a AEM EMS? $twelve00 Brand new (vendors here ask $1299) shhhhhhh
PFC D-jetro? $ten fifty to eleven hundred (vendors- $1300) shhhhhhhhhh
Uras style Body kit? $300
Carbon fiber hood? $350
Coilovers that slam to your mofking frame? $450
Wide fenders, over fenders, wheels, brakes, that Mugen SR25det crate motor?... ill go deep hunting that part for you..
Tomei/hks/greddy/ssr/work/volk/stance/Ohlins to Megan/gsp/cxracing... anything, just dont ask me shit when you dont have money, your wasting your own time and giving yourself despair. Also i dont to importing, so i cant get you a front clip and such, sorry.
Thank you for looking