CamryOnBronze
06-06-2012, 09:11 AM
Up for grabs is a set of (3) Ichiba front 5 lug conversion hubs for the S13. All three of the hubs have good wheel bearings. I had one as a spare, so that is why there are three included.
Two of the hubs have H&R TRAK extended studs installed that came with the included 20mm hubcentric spacers. On one of the hubs, one of the studs is broken and the splines in the hub are stripped. You have a couple of options here- swap the remaining four studs and a replacement stud over to the spare included hub, or install a new stud into the existing hub and tack weld it in place on the back side. Or, I guess if you don't care, just run four studs/lugs.
I've also included a set of chrome closed-end lug nuts (19 of them- one was damaged on the stud that broke.) All of the standard length studs are included as well. Here are some pics of the package:
http://farm9.staticflickr.com/8146/7294681102_06c77d4842_c.jpg
http://farm9.staticflickr.com/8145/7294680540_e0b2677eef_c.jpg
http://farm8.staticflickr.com/7232/7294679984_990a86223d_c.jpg
There is plenty of stuff here to assemble a cheap and reliable 5 lug setup with some really nice spacers to boot. These are not cheap eBay bolt-on spacers- I JUST purchased them new from FR SPort about a week ago:
H&R 4065662 Trak+ DRS Aluminum Magnesium Wheel Spacers 5x114.3 +20mm (http://www.frsport.com/index.php?target=products&mode=details&product_id=9342)
I am asking $225 shipped OBO via UPS with tracking number for all of the items above. If you want to split the items up, I can do this:
ALL ITEMS: $225 Shipped
(3) Hubs, all studs, lugs: $185 Shipped
(2) 20mm spacers, no studs included: $60 Shipped.
Please PM me with any questions or concerns- thanks!
Damon
Two of the hubs have H&R TRAK extended studs installed that came with the included 20mm hubcentric spacers. On one of the hubs, one of the studs is broken and the splines in the hub are stripped. You have a couple of options here- swap the remaining four studs and a replacement stud over to the spare included hub, or install a new stud into the existing hub and tack weld it in place on the back side. Or, I guess if you don't care, just run four studs/lugs.
I've also included a set of chrome closed-end lug nuts (19 of them- one was damaged on the stud that broke.) All of the standard length studs are included as well. Here are some pics of the package:
http://farm9.staticflickr.com/8146/7294681102_06c77d4842_c.jpg
http://farm9.staticflickr.com/8145/7294680540_e0b2677eef_c.jpg
http://farm8.staticflickr.com/7232/7294679984_990a86223d_c.jpg
There is plenty of stuff here to assemble a cheap and reliable 5 lug setup with some really nice spacers to boot. These are not cheap eBay bolt-on spacers- I JUST purchased them new from FR SPort about a week ago:
H&R 4065662 Trak+ DRS Aluminum Magnesium Wheel Spacers 5x114.3 +20mm (http://www.frsport.com/index.php?target=products&mode=details&product_id=9342)
I am asking $225 shipped OBO via UPS with tracking number for all of the items above. If you want to split the items up, I can do this:
ALL ITEMS: $225 Shipped
(3) Hubs, all studs, lugs: $185 Shipped
(2) 20mm spacers, no studs included: $60 Shipped.
Please PM me with any questions or concerns- thanks!
Damon