SR20DET complete partout, built block, heads, cams, gt2871, etc...

[tabasco122]

Getting rid of the car and everything, starting school next semester and as long as i have the car ill just keep spending money on it, my loss is your gain. Trying to put pretty decent prices on everything as i want it sold, feel free to make offers on stuff, worst i can say is no. Under 10k miles on pretty much everything aside from the stock parts. The turbo was used for less than 200 miles, on only 8-10lbs of boost. Didnt even have a boost controller installed.

I have had some issues shipping things before, I'm a busy person, so dont expect to have your stuff shipped out the next day, but i do promise if you order something i will get it out within a week. I try to use USPS whenever possible, but if you have another preference i would be fine with that.

Everything is for a s13 SR20DET

Stock modified harness S13>S13 $80
generic e-fan (cooled my SR for 2 years with the mishi rad in south LA heat)$25
SR waterneck $10
SR starter $60
Black chrome powdercoated valve cover $60
Stock injectors (all work, some have the little plastic tips broken off) $45 for all 4
stock fuel rail $15
Stock intake mani $40 (upper and lower)
Stock throttle body (with tps) $30
Stock coolant pipes under manifold $10
Stock Exhaust mani, no cracks $40
S13 SR IACV $20
SR knock sensor $20
Delrin motor mounts $30
Solid tranny mount $30
Nismo Adjustable FPR $100

misc stuff, just ask.

here are some pics, not finished disassembling everything yet though.

[Campos]

pm sent on short block

[lucas240sx]

interested in the wiring harness
What do you mean modified?
Anything cut?
Also the stock intake pipe
Will you sell the iacv?
Thanks

[tabasco122]

which one? one is a stock sr harness that was modified for the 240, it ran the motor fine but looked like crap, so i bought a wiring specialties harness, which is also for sale. the only thing that didnt work with that harness was the factory coolant temp gauge

the wiring specialties harness has one wire cut, the one to the 02 sensor, as i had narrowband emulation from my lc1 hooked up. wouldnt be much trouble to add that back in, but thats why its priced so low.

yes, iacv is available, just forgot to list it.

[MACoupe]

Do you have s13 Sr ps pump?

[tabasco122]

Do you have s13 Sr ps pump?

yes, but its missing the tensioner bracket. if you are replacing an old pump you will be fine.

[tabasco122]

Radiator sold, deposit accepted on the head/block/cams, pending sale on monday. cas, ecu, and igniter sold. im getting a lot of interest, but first person to throw up cash gets it.

[1gr8bar10der]

Pics of the "black chrome" valve cover?

[tabasco122]

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/542090_244748652289715_7781805_n.jpg

there is a small crack in the top of the valve cover that you can really only see from underneath, its where the dent is.

[Sidewayz_S14]

If the sale doesnt go through the sr head for sale lmk willing to pay shipping ..

[###90whyte240sx###]

Still have coil packs?

[tabasco122]

buyer for the wiring specialties harness hasnt contacted me back yet, so its back up. some stuff sold, list has been updated. if you need anything, just ask, this was a complete partout.

[RedRedWine]

payment sent for sr stock intake hose

[tabasco122]

If you ordered something from me in the last week or so, it should be going out today. It would have gone out yesterday but the weather was pretty shitty, it was raining pretty bad all afternoon. you will get tracking numbers when i get back. Also lowered the price on the turbo and some other stuff, final bump.

[###90whyte240sx###]

Clean your inbox out! How did you send my stuff out if i didnt give you my address?

[tabasco122]

Clean your inbox out! How did you send my stuff out if i didnt give you my address?

It was on PayPal.

[OutlawLui]

still have the vcover? will it fit a s13 red top?

[tabasco122]

still have the vcover? will it fit a s13 red top?

Yes and yes. It has a small crack in the underside where the dent is in the pic. A bit of in weld and it should be fine, the Powdercoat covers it up on the top but I would still put something under it for piece of mid. That's why it priced so cheap.

[aearl34]

selling the crankshaft?

[tabasco122]

selling the crankshaft?

block and head already sold.

[5t3v3n]

Sr ecu and flywheel?

[Slammed Assassin]

Do u have a stock sr oil catch can setup?

[tabasco122]

i have the catch can itself, i dont have any of the hoses.

[ahugg002]

Im interested in the s13sr upper waterneck if you still have one for sale i will take it.

[drumnbasslvr]

please post a picture of the turbo and describe its size specifications, then an asking price please. I want this size turbo. I am frightened and bored by my hks gt2835r! I gotta step down! I'll get me killed one day or in deep trouble.

If anyones reading this, I wont post until I secure my replacement turbo first. My car cannot tolerate down time. I'd be a sad panda.

[theboy]

got any pics of the stock harness? everything there ready to go?

[ricky508]

GLWS fellow south louisianian...I've began parting out my s13 Sr also trying to go rb! Post yourself on nostreetracing.org there's always people on there looking for Sr stuff

[Josue]

PM sent. looking for a few items to buy. paypal ready.