PDA

View Full Version : CA 1992 Nissan 240SX Type X SE Built ***SEE AD***


doug200t
05-28-2012, 01:18 PM
****************SOLD*****************
I have a meticulous built 1992 240sx that no stone was left unturned when building this project for personal interest. As it stands this car is probably one of the best set out 240sx out there for all around balance and performace with the Nissan JDM Full Type X OEM Aero. I did not waste a penny in building this car and my last an final frontier was to lay out a great paint job. This has been left for the new owners choice. All body is straight and if owner wants ready to paint. I have found interest in another project that will take me years to complete so I will post up this full compitition ready Nissan 240sx. With this car you will not worry about any issues what so ever as it once again was built by me and professionals in the industry. I will not hesitate to purchase the car back from you if you are not happy with the car. My guess is you would be a kid in a candy store in this car. I dont have many SHOW quality pics as this was always garaged and never brought out in the public but once for the Fontana Nissan Meet. The pictures I have were taken with my cell phone. Serious buyers will contact me please do not waste my time or yours as I am straight forward.

I normally do not visit Zilvia much but please if you have any questions Please call or Text DO NOT FILL THREAD AS I DO NOT VISIT MUCH TEXT WILL GET FAST RESPONSE
*****I have full Documentation and Reciepts of all purchases**********
Edit Re30 not included unless you add on top
My contact info if you have any questions or concerns is

951-534-7221
Price:10,000
Specs:

*1992 Nissan 240sx SE All Power windows
*Red Top SR20DET Fully BluePrinted/Built
*Eagle H-Beam Rods
*CP Forged pistions 87mm 9.1 Compression
*Port and Polished Head 3 Angle Valve Job
*JWT S4 Race Cams 266/266
*Clevite Race Bearings Mains/Rods
*Stainless Steal Braid Water Lines and Oil Lines
*Garret GT2871R .86AR Turbine Turbo Ball Bearing Turbo
*ARP HeadStuds
*ARP Rod Bolts
*Cosworth 87mm Headgasket 1.5mm
*Nismo Thermostat
*S13.4 hybrid Vavle Cover for baffling -waiting to be powder coated not installed yet
*HKS Turbo Actuator
*HKS Blow Off Valve
*Fuel line modified for fuel pressure system
*Stainless Steal braided teflon fuel lines for e85 Ready fuel
*Walbro 255lph
*Apexi Noir Exhaust in factory stealth black from Apexi
*Powered by Max Coil Overs Amazing setup
*Circuit Sport Adjustable arms rear toe and camber
*Circuit Sport Front Tie Rod pillow ball
*Brand new Wheel bearings all around and 5 Lug conversion ICHIBA
*180SX Front Rotors and Calipers
*180SX Type X Rear Differential
*180SX JDM OEM Front Bumper Brand New
*180SX JDM OEM Bumper Lights Brand New
*180SX JDM OEMTurn Signal Lights Brand New
*180SX JDM OEM Front Lip ***VERY VERY RARE*** used from Japan MINT Dealer did not stock item anymore is why I had to go used
*180SX JDM OEM Side Skirts Brand New
*180SX JDM OEM Rear Valence ***VERY VERY RARE*** used from Japan MINT Dealer did not stock item anymore is why i had to go used
*180SX JDM OEM Rear Wing Brand New
*180SX JDM OEM Tail Lights Brand New
*180SX JDM OEM Carbon Kevlar 180sx Center Piece
*180SX JDM Manual Seatbelt Conversion
*180SX JDM OEM Interior Panels
*180SX JDM OEM Mint Condition Front seats are included
*Apexi Air Induction Kit
*Circuit Sport Aluminum Resivore Tank
*1 Piece Aluminum Drive shaft from Inland Drive Line
*Wheels- I will include Work VSXX 17x9 +17 and 17x11 +22
*Sumitumos 235/45/17 Front 275/40/17 Rear
*Autometer Gauges BOOST,OIL,Water Temp
*Hydrolic Handbrake installed and converted lines all to Stainless steal for Hydro setup
*Sparco Stearing Wheel
*JDM S13 Nissan Cluster
*Consult Plug wired for Dealer Nissan Consult for DTC
*Turbo Elbow modified for Wideband Gauge Innovative LC1
*HID Headlights-

I am sure I had forgot a few items but this car is laid out well as you can see from my build sheet

ATTENTION!!!!!!!

SERIOUS BUYERS ONLY I will not trade you for a lower build car.... Possible Interest in S2000,93+Supra,350z,Is250,is300,RX7FD this is not a for sure trade this is a maybe consider list
No one will get location of the car unless speaking to me directly. The car is stored in a closed door facility...


http://i1221.photobucket.com/albums/dd465/Douglas_Aly-Rodriguez/sale/IMG_0725-1.jpg

http://i1221.photobucket.com/albums/dd465/Douglas_Aly-Rodriguez/IMG_0719-1.jpg

http://i1221.photobucket.com/albums/dd465/Douglas_Aly-Rodriguez/sale/IMG_0721-1.jpg

http://i1221.photobucket.com/albums/dd465/Douglas_Aly-Rodriguez/sale/IMG_0722-1.jpg

odyvia13
05-28-2012, 01:42 PM
this clean bro! glws

scels240
05-28-2012, 01:51 PM
your pics shouldnt be bleary
so we can see the details

Grenade180sx
05-28-2012, 04:33 PM
car is very clean and well built, GLWS !

doug200t
05-28-2012, 04:42 PM
Thank you very much for the compliment. Glad you have seen and approve of the car it is a beautiful machine.

Sent from my GT-N7000 using Tapatalk 2

Nick_04K
05-28-2012, 08:57 PM
Gt2871 with SMIC?
$10,000 and doesnt include the JDM seats?
Car looks good and has HUGE potential, but imo the starting price seems steep.
At the same time, what do i know?! GLWS man.

FaLKoN240
05-28-2012, 09:22 PM
No expense was spared. ...

Except a camera good enough to take pics in broad daylight.

usdm180sx
05-28-2012, 10:20 PM
Why are the pictures so shitty? For that amount you should post better pictures. Just saying

doug200t
05-28-2012, 10:39 PM
Pending sale

Sergio180sx
05-28-2012, 10:39 PM
nice build but 10k! no paint, no 180sx seats at least..... glws

doug200t
05-29-2012, 01:23 PM
****************sold*****************