1 of the most LEGIT, complete SR20DET builds ever (Epic!)

[Seraphim38]

Okay people, this is not your everyday listing. What we have here is a complete, PAC-MAN built SR20DET setup with literally tens of thousands of dollars into it and we’re talking everything; Garrett GT40R Full Race Setup with 4” downpipe, sleeved block, Exedy triple carbon clutch, AEM EMS, Greddy intake manifold with Q45 TB…on and on. This setup will not be parted out so don’t ask. There is a great deal of pics and video documentation on this epic build, and it has only 100 miles of break in and dyno tuning on it. That’s it; everything is pretty much new and ready to rock. No corners were cut or expense spared and one of the most comprehensive, no-holds-barred builds in history. I am posting this for my best friend who is not on here that much. If interested send a PM and I will provide his email and phone number, as well as my contact information.

http://i101.photobucket.com/albums/m70/ponchofever/PACMANS%20SR20/ps2.jpg
http://i101.photobucket.com/albums/m70/ponchofever/PACMANS%20SR20/IMG_20120501_214031.jpg
http://i101.photobucket.com/albums/m70/ponchofever/PACMANS%20SR20/IMG_20120501_214216.jpg

Details:
SR20DET

- HKS Cams stage 3
- HKS Lash killer kit ( solid lifter kit )
- Greddy Valve Springs
- Crower Retainers
- Ferrea Custom Valves
- Greddy Rocker Arm Stoppers
- Greddy Adjustable Cam Sprockets
- Cylinder head square ported and polished by Mo Flo
- Apex’I 87mm head gasket
- Greddy 87mm pistons & rings
- Greddy rods & wrist pins
- Golden Eagle sleeves
- New OEM Oil Pump
- New OEM Rear Main Seal
- Plumbing for external water pump
- ARP Main Bolts
- Greddy Head Studs
- Greddy Oil Pan
- OEM Main and Rod Bearings
- ATI Super Damper
- Greddy Intake Manifold (ported by Mo Flo) w/custom 90mm throttle plate, Q45 throttle body
- Greddy Oil pan
- Custom Full-Race stainless turbo manifold
- Custom Top Feed Fuel Rail
- Rochester 1600cc Injectors
- SplitFire Coil Packs
- Garrett GT40R dual ball bearing turbocharger
- 44mm Tial Wastegate
- Full-Race Custom 4” stainless down pipe
- Full-Race Custom stainless dump tube
- Full-Race Custom stainless exhaust manifold
- Nismo Motor Mounts

CLUTCH & TRANS:
- Exedy triple plate carbon clutch kit
- SR manual transmission

Electronics
- AEM EMS engine management
- AEM 3.5-bar MAP sensor
- New OEM wire harness

More eye candy:

http://i101.photobucket.com/albums/m70/ponchofever/PACMANS%20SR20/IMG_20120331_193340.jpg
http://i101.photobucket.com/albums/m70/ponchofever/PACMANS%20SR20/IMG_20120331_193521.jpg
http://i101.photobucket.com/albums/m70/ponchofever/PACMANS%20SR20/Picture010.jpg
http://i101.photobucket.com/albums/m70/ponchofever/PACMANS%20SR20/IMG_20120405_214430.jpg
http://i101.photobucket.com/albums/m70/ponchofever/PACMANS%20SR20/IMG_20120405_215003.jpg
http://i101.photobucket.com/albums/m70/ponchofever/PACMANS%20SR20/IMG_20120405_214615.jpg
http://i101.photobucket.com/albums/m70/ponchofever/PACMANS%20SR20/Picture013.jpg

More pics and videos:
PACMANS SR20 pictures by ponchofever - Photobucket (http://s101.photobucket.com/albums/m70/ponchofever/PACMANS%20SR20/?start=all)

Selling everything listed (Engine/Turbo/Tranny/AEM) ready to drop in and go.
Price: $7000 firm. NO trades or parting out.

[youngkmahboy]

reciepts? pictures of build in process or with the valve cover off those will def help with your sale

[EricsWorks]

WoWzers! Helluva deal! Bump!

Sent from my Galaxy Nexus using Tapatalk 2

[Seraphim38]

We have verification of build quality and origin from the builder and from the Northwest state's premier SR20 builder who pretty much full time builds Formula Drift cars. Contact information and verification from both parties is available, though receipts have not become available at this time.

The video at this link shows the engine coming together:

http://s101.photobucket.com/albums/m70/ponchofever/PACMANS%20SR20/?action=view&current=GANSTAVIDEO_0003.mp4

And this video shows setup and preliminary tuning, which I think was something like 378hp at 12psi of boost! (I can't get the video to load because my work internet connection bandwidth is like dialup speed, so I can't make accurate assertions as to its content)

http://s101.photobucket.com/albums/m70/ponchofever/PACMANS%20SR20/?action=view&current=DYNO240SX_0002.mp4

Overall, rest assured that this deal is as legit as it gets.

[ariansworld]

Daaang. What a deal. Glws!

[Seraphim38]

OK people, here's the deal. If I can get buyers for enough of the major components we can separate out the big pieces as follows:

SR20DET sleeved, built long block with the Greddy intake manifold, splitfire coil packs, top feed fuel rail and injectors, with or without ATI damper

GT40 Turbo with Full Race manifold, 4" downpipe, Tial MVR 44mm wastegate and dump pipe

Transmission with quick shifter

Exedy carbon triple plate clutch and flywheel

PM offers if interested. I can take phone calls and answer questions as needed. I am going to see about pricing each of these and maybe can come up with reasonable, market value asking prices in the next day or so.

[Seraphim38]

OK here we go:

SR20DET sleeved built long block with solid lifter setup, ported Greddy intake manifold, Q45 throttle body, top feed fuel rail and injectors, valve cover to Greddy oil pan. $4750 shipped. That a killer price for what is included (see the engine list above and inquire for details).

GT40 turbo setup with full race manifold, 4" downpipe, Tial wastegate and downpipe :$2950

Exedy carbon triple plate clutch. No, that is not a typo; this is a two thousand dollar triple plate clutch that hasn't even been broken in yet. $1K

AEM EMS Series 1 system with MAP sensor, CAS for EMS and complete NEW engine harness $1,100 shipped

Nismo motor mounts $90

ATI Super Damper $350

Greddy billet pulleys $200

Alternator $50

Starter $50

Splitfire coil packs $275

SR 20 Transmission, shifts excellent with no grinds, $275 (local sale preferred)

[Seraphim38]

back to the top.

How often do you see a fully legit setup being sold? Send offers people...