PDA

View Full Version : Cold start squeaking, drop revs then back up again, plz read


jperez311
05-22-2012, 11:56 PM
When I start my car (mainly just cold starts mornings) I start my car then my car revs up from start, then drops like 500 then I press's the gas to keep the revs up. I gass it and it squeaks for a bit then stops then the revs are normal again. Any suggestions why this happens and if someone else experience this?

KiLLeR2001
05-22-2012, 11:59 PM
Either loose belt or polished aluminum pulley.

jperez311
05-23-2012, 12:01 AM
It seems to new that I have like an extra load on my engine on cold starts. So you suggest me to get polished pulleys and loosen the belt a bit?

S-Nation S13
05-23-2012, 12:10 AM
Check your belts as you turn on the whip splash a littld water on the belts if the sound goes away you got loose belts.

KiLLeR2001
05-23-2012, 01:31 AM
It seems to new that I have like an extra load on my engine on cold starts. So you suggest me to get polished pulleys and loosen the belt a bit?

I'm saying your problem is either a loose belt or you have polished aluminum pulleys causing a squeak.

XiaoAZN
05-23-2012, 01:49 AM
I had the same issue. I had a lose power steering belt, tightened it and problem was solved.

Nikeboy355
05-23-2012, 08:56 AM
Let your car sit over night...
In the morning take off the fuel line from the fuel filter to the fuel rail...

If fuel does not gush out, you have a fuel pressure problem...

Either your injectors are leaking, your fuel pressure regulator is bad, or your fuel pump is dying...