1990 240sx Partout

[DEMo]

Ok. So this shell is no good. Parting it out. Located a few miles north of Santa Rosa. Can meet closer to the bay for most items. The only damage is to the door and quarter panel. Fender and front end is ok.

1990 240sx
Clean Dash
Zankoku Performance Coilovers
Welded/Plated Diff
Circuit Sports Pivot Ball in Transmission
Hot Shot Headers
Q45 fuel pump

2.5" straight pipe with removable stock muffler

Every part of the car is up for grabs

Front Suspension:
crossmember - 50
LCA w/ great ball joints - 30 each 50 pair
Tension Rods - 10 each 15 pair
Tension rod brackets - 15 each 25 pair
Swaybar w/ endlinks - 10
spindles - 25 each 40 pair
4lug hubs - 15 each 20 pair

Rear Suspension:
Subframe - 60
RLCA - 30each 50 pair
RUCA - 10 each 15 pair
TC Rod - 10 each 15 pair
Toe Rod - 10 each 15 pair
Swaybar w/ endlinks - 10
ebrake cables - 30
rear spindle - 25 each 40 pair
4lug hubs -15 each 20 pair
Axles - 30 each 60 pair
S14 open diff (no cover) - 40

Drivetrain:
KA24E - SOLD
Solid Motor Mounts - SOLD
Solid Transmission Mounts - SOLD
A few KA-T Parts - SOLD
Turbonetics Turbo - SOLD
Incomplete 5-spd swap - just need ECU.Flywheel.Clutch.Transmount - $350

Interior:
CLEAN dash - 100
Seats - 20 each
too lazy to post anything else.

Exterior:
Clean Driver QP -

http://farm6.staticflickr.com/5111/7222050300_b55b8ffc42_c.jpg
http://farm6.staticflickr.com/5112/7222049306_3bf845225a_c.jpg
http://farm8.staticflickr.com/7092/7222051284_24c4374e3e_c.jpg
http://farm8.staticflickr.com/7082/7222048194_d3de7f0f1e_c.jpg
http://farm8.staticflickr.com/7226/7222047030_e3e617e5e7_c.jpg

post what you want and I will give you a price.

[Jesterjones13]

are the fenders clean? both front fenders priced and picked up?

[DEMo]

are the fenders clean? both front fenders priced and picked up?

The fenders are NOT clean. They have small dents and scratches. $50 for both.

[Jesterjones13]

Thanks bro, glws
im looking for some clean fenders

[the1nonlyljon]

interested in the fenders. can you text me some pics? ill pm you right now.

[burns_rubber]

what bumper shark nose with the square turn signals?

[Robby90]

Pig. Nose lip?

And motor mounts

[Marc Anthony]

Is the dash uncracked? If so, I'll take it, as well as the solid motor mounts and transmission mounts. I'm leaving AZ tonight, in route to Idaho, and I can swing buy and pick these up, please let me know ASAP, text or call me at 928-581-8267

[DEMo]

what bumper shark nose with the square turn signals?

Chuki (sharknose bumper) but I also have a pignose.

[shamoney27]

Hey how much the sub frame shipped to 10303 and some pics plz

[EricsWorks]

I'll take the fenders if your willing to ship! I'll pay shipping!

Sent from my Galaxy Nexus using Tapatalk 2

[jamrome918]

how much for coolant over flow tank?

[jdmspooge]

If you have the clear plastic lining of the driver door, then i need that. LMK

[driftracerx]

do you have subframe collar bushings?

[DEMo]

Hey how much the sub frame shipped to 10303 and some pics plz

I will find out for you.

how much for coolant over flow tank?

$10 + shipping.

If you have the clear plastic lining of the driver door, then i need that. LMK

I have it. Send me a pm.

do you have subframe collar bushings?

I don't.

[Tprom]

is that a KA24E, if so how much are you trying to throw the wire harness for?

[Tprom]

nvm its sold, lol.

[DEMo]

is that a KA24E, if so how much are you trying to throw the wire harness for?

I do have a spare harness. It is not in the best shape but I will post a picture.

[david92]

hey dude whats up, interested in the coil overs give me a call or txt 626 3150 681

[mr.nismo.]

e brake to 93004?

[Agent_S13]

Got the engine splash shield/cover? (Protects bottom of engine)
Got a pic?

Can pick up, just let me know.

-Aaron
'91 240sx coupe

[moth]

you got the shift boot plate?

[bladetech8]

I need the BOTH the Center A/C Vent and Passenger Side A/C Vent BUT ONLY if they're not cracked and no broken trim or fins..

I also need the two front wiper nozzles from the hood, just the little black nozzles that snap into the hood, none of the tubing or anything else. Obviously not broken, as I need them to snap into my hood ;)

Lmk thank you!

[BoostWanted]

http://www.castoffdebt.comwell

Thanks for your post.

Spaaammzzz?

[DEMo]

hey dude whats up, interested in the coil overs give me a call or txt 626 3150 681

Coilovers are pending

e brake to 93004?

I will pull it and then let you know how much it will cost.

Got the engine splash shield/cover? (Protects bottom of engine)
Got a pic?

Can pick up, just let me know.

-Aaron
'91 240sx coupe

Sorry, no cover
you got the shift boot plate?

Are you talking about the plate that holds the rubber grommet? I have that.

I need the BOTH the Center A/C Vent and Passenger Side A/C Vent BUT ONLY if they're not cracked and no broken trim or fins..

I also need the two front wiper nozzles from the hood, just the little black nozzles that snap into the hood, none of the tubing or anything else. Obviously not broken, as I need them to snap into my hood ;)

Lmk thank you!

I will get those today and check the condition.

[jdmspooge]

I will find out for you.



$10 + shipping.



I have it. Send me a pm.



I don't.

sending you a PM right now.

[Adam496]

Do you still have the window crank handles?

[GoodieGarageLA]

By any chance are you selling the cluster? i know it's not listed. ship to 91789? i can provide you a label. nice Crown Royal shift boot btw.

[JdmGtDriver]

fuel rail mounting bolts and washers?
climate control?
din panel?
radio brackets?

[Dsic240sx]

god damn it! why are all the clean dashes so far from me!!!!

[Jade350z]

do you have the chassis harness?

[ag240sx]

complete 5 speed swap?