C-unit
05-15-2012, 06:20 PM
I have a Motec M48 standalone ECU that I don't need. It is just the ECU so you'll need a harness for your application.
Here is the spec i copy and paste from motec's website for those who are not familiar with them.
MoTeC’s M48 is a popular, earlier generation ECU with a lot to offer both road and race applications. Testament to its enduring performance and reliability, it is used as the control ECU in Australia’s V8 Supercar series.
It represents excellent value for a wide range of up to eight cylinder and two rotor applications. Applications up to twelve cylinders are possible using group fire or semi-sequential injection.
The DOS-based tuning software is efficient and easy to use.
Several upgrades are available to increase the functionality of the M48 including traction and launch control, anti-lag and data logging, to name just a few.
Basic Specifications
Outputs
8 x Injector outputs—high or low ohm
Up to 2 x Ignition outputs—see optional configurations ‡
Up to 4 x Auxiliary outputs—switched or PWM—for functions such as turbo waste gate control, idle speed control, intercooler spray bars, or to be used as additional ignition output ‡
‡ Optional ignition/auxiliary output configurations:
(configurable in software)
2 ignition outputs and 3 auxiliary output
1 ignition output and 4 auxiliary output
Inputs
3 x Analogue voltage inputs—fully configurable including custom calibrations
3 x Analogue temperature inputs—fully configurable including custom calibrations
1 x Wideband Lambda—for Lambda measurement and control
2 x Digital/speed inputs—for wheel speeds and function activation
You can check out the link for more info:
MoTeC > M48 > Overview (http://www.motec.com/m48/m48overview/)
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMG_2147.jpg
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMG_2148.jpg
I am asking $1300obo for it. Shipping will be $25 within North America. If you want to use paypal, please add 3.5% on top.
I am located in Richmond BC so local pick up it welcome. I can also meet at bellingham WA as well.
Here is the spec i copy and paste from motec's website for those who are not familiar with them.
MoTeC’s M48 is a popular, earlier generation ECU with a lot to offer both road and race applications. Testament to its enduring performance and reliability, it is used as the control ECU in Australia’s V8 Supercar series.
It represents excellent value for a wide range of up to eight cylinder and two rotor applications. Applications up to twelve cylinders are possible using group fire or semi-sequential injection.
The DOS-based tuning software is efficient and easy to use.
Several upgrades are available to increase the functionality of the M48 including traction and launch control, anti-lag and data logging, to name just a few.
Basic Specifications
Outputs
8 x Injector outputs—high or low ohm
Up to 2 x Ignition outputs—see optional configurations ‡
Up to 4 x Auxiliary outputs—switched or PWM—for functions such as turbo waste gate control, idle speed control, intercooler spray bars, or to be used as additional ignition output ‡
‡ Optional ignition/auxiliary output configurations:
(configurable in software)
2 ignition outputs and 3 auxiliary output
1 ignition output and 4 auxiliary output
Inputs
3 x Analogue voltage inputs—fully configurable including custom calibrations
3 x Analogue temperature inputs—fully configurable including custom calibrations
1 x Wideband Lambda—for Lambda measurement and control
2 x Digital/speed inputs—for wheel speeds and function activation
You can check out the link for more info:
MoTeC > M48 > Overview (http://www.motec.com/m48/m48overview/)
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMG_2147.jpg
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMG_2148.jpg
I am asking $1300obo for it. Shipping will be $25 within North America. If you want to use paypal, please add 3.5% on top.
I am located in Richmond BC so local pick up it welcome. I can also meet at bellingham WA as well.