BUILT RB25 300ZX PROJECT PARTOUT*tubular manifold*Comp TBB*GReddy*NEW 300ZX PERFORMAN

[91300zxttkid]

I hate to do this.. But i have to part out my build due to financial reasons..

S1 RB25

-Custom Aluminum oil pan made from 6061 aluminum for 300zx stock sway bar and NOT cutting the subframe at all.
-ARP Main and Head studs
-ACL Race main and rod bearings
-Wider oil pump drive collar machined on the crank.
-New N1 Oil pump
-Eagle rods
-CP Pistons .40 OB
-Cosworth multilayer headgasket
-Port and polished head
-3 angle valve job and all seats re-cut
-Supertech valvesprings and Ti retainers
-Triton valve steam seals
-RB20 cams
-GReddy adjustable intake and exhaust cam gears
-GReddy timing belt
-New NISSAN Idler and tensioner pullys with new stud.
-Illusion Purple powder coated covers with -10AN fittings welded on.

http://i40.photobucket.com/albums/e206/91300zxttkid/cp2.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/rbpaint3.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/machineshop5.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/arp.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/arp-1.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/MLSCosworth.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/Pisteyysss.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/33333.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/---.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/portwork-1.jpg

Current condition of the engine
http://i40.photobucket.com/albums/e206/91300zxttkid/purplerb3.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/freashbay2.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/IMG_0460.jpg

For the Engine LONGBLOCK NO MANIFOLDS $5500.00

Tubular T4 twin 38mm dump manifold with NO TIAL GATES $1300 plus shipping

COMP TURBO CT4 6754 Triple ball bearing, T4 3 inch vband 750HP TURBO polished housing $1000 plus shipping NEW NEW NEW
http://i40.photobucket.com/albums/e206/91300zxttkid/mega5.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/2011-10-22_05-53-35_198.jpg

Intake manifold with velocity stacks inside, cut and shortened, and powder coated mirror black $800 plus shipping.

Transmission with Z32 tail section, RB26 bell housing, GTR internals
$1200

Stock RB25 Flywheel with OEM bolts $60 shipped

DXD Southbend STAGE 6 6puck sprung hub clutch with 2200lb pressure plate, good for 800 hp Made for 300ZX and for RB NEW!
$800 plus shipping
http://i40.photobucket.com/albums/e206/91300zxttkid/2010-04-28131117.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/2010-04-28131457.jpg


EP Racing Once piece driveshaft NEW NEW NEW for TT 2+0 $210 SHIPPED
http://i40.photobucket.com/albums/e206/91300zxttkid/epracingdriveshaft.jpg

Powertrix RACING coilovers used for 1000 miles missing some top green caps.. work great!
$1000 plus shipping
http://i40.photobucket.com/albums/e206/91300zxttkid/suspention.jpg
Powertrix rear upper control arms.. $180 shipped
TIEN front adjustable tension rods
$160 shipped

Oil cooler kit with lines/fittings and Thermostat controlled sandwhich plate with fitting..
$350.00

Powerhouse Racing 8AN fuel rail with BRAND NEW Injector Dynamics 1000cc injectors $900 plus shipping
http://i40.photobucket.com/albums/e206/91300zxttkid/JNS.jpg

Tial 38mm MVS Vband wastegates in Red, I have 2 NEW NEW NEW
$250.00 each

Tial 50mm BOV in red NEW NEW
$200 plus shipping
http://i40.photobucket.com/albums/e206/91300zxttkid/2010-04-26114429.jpg



http://i40.photobucket.com/albums/e206/91300zxttkid/purplerb.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/Freashbay.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/freashbay1.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/fuel6.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/fuel1.jpg
http://i40.photobucket.com/albums/e206/91300zxttkid/384746_10150344494440028_500365027_8349268_1090846 500_n-1.jpg

txt or EMAIL ME FOR FASTEST RESPONCE.. VERY MOTIVATED SELLER, I CAN SEND PICS.. WORK OUT DEALS.. DRIVE TO MEET PEOPLE HALFWAY FOR THE ENGINE OR BIG THINGS..

I have more that is not listed on here.. Just ask..

Thanks!!
-George

[blkkouki]

How much for the valve covers?

[95s14rb25]

Bump for other marylander
Wish the manifold was t3 and I had more money.

[future]

All that ballerness. Then rb20 cams? Why?

[new dood s13]

price on t belt and cam gears??

[91300zxttkid]

Waiting to try and sell engine as a whole at first.

Cams is where I ran out of money.. The exhaust duration is a little larger, that's the only way I could mount the gears to the cams.. RB 25 intake can has the vvt.

Jspec tails sold
Powertrix side skirts sold
Tein lower front tension rods sold
Have a LOT of people interested in motor but as of yet no cash in hand..

Thanks,
George

[91300zxttkid]

Injectors and ATI damper pending..

Someone make some good offers on the RB!!

-GReddy gracer rep Z32 front bumper..
-AEROLOCK hood pins..
-Kinz Creations front nose panel
-Smoked Z32 turn signals
-POWERTRIX RACE COILOVERS
- The chassis is still on wheels.. with cage.. dash ect.. Rolling chassis with new front windshield installed.. hood has AeroLatch locking hood pics installed.. 2000 for chassis.

COMP TURBO 1000
Tial wastegates and BOV.. new new new
Ebay 24x4x? fmic core

Powerhouse racing fuel rail

RB25 upgraded intake manifold powder coated mirror black.

T4 Sch-10 StainLess steel hand fabricated and hand tig welded, set up for dual 38mm wastegates. 1500

[rune1241]

how much for the front bumper? and what are the spring rates on the coilovers?

[91300zxttkid]

Bumper I can do 200 for.. however I see your in SC soo shipping a bumper may be a little pricey.

The Spring rates on the Race coilovers are which ever stock setup powertrix makes with them.
I believe its something like 6 and 8 the coilovers have adjustable dampaning built in as well.
Heres there site with all there info on the coils.. Coilovers, Springs, & Struts (http://www.powertrix.com/z32coils.htm)

My coilovers are in the middle of the page.. they retail at 1250.00 My price is 1000.00 shipped these have roughly 1000 miles on them, and 2 of the little caps are missing for on top to adjust dampning. cant be expensive to replace those though..

Let me know if your serious just email me.

[ka-mario]

Do you have the wire harness?!

[91300zxttkid]

i was going to use a megasquirt stand alone and that has its own harness.

Still lots of interest in the motor assembly, no cash in hand so the motor is still available.

[###90whyte240sx###]

Man that thing looks sweet. Bump for interesting. Build.

[200120012001]

Bump for my old slicktop roof!! Glws George!

[wrxstiswap]

Willing to sell dump pipes to tials seperate?

[Flaco S14]

part out the rb25 trans?

[AmirM24]

so jspec tails sold? and how much for the smoked turn signals shipped to 60053?

[91300zxttkid]

AmirM24- $100.00 shipped? there brand new.
let me know.

I had another 3 people tell me they had cash in hand this weekend.. as soon as i drop the price bomb on the engine everyone stops txting..

Its 8k for the engine and both intake and exhaust manifolds (which most people are interested in it seems)

[ch1873857]

soooooo you got rid of vvt? interested in comp turbo if i knew have fast it spooled

[91300zxttkid]

To The Top!!!!!

[ariansworld]

I want the valve covers

[91300zxttkid]

^^^ Not parting out the motor.. Will only sell as a longblock, that's the most it will be broke down.

Still LOTS of parts left!! The RB is still avaliable, the trans, exhaust manifold, intake manifold, ID 1000 cc injectors, Powerhouse racing 8AN fuel rail, Phoenix Fuel pressure regulator.. ect ect

BUY BUY BUY!!!

[Ae86Joker]

Do you have the RB25 crank pulley?

[91300zxttkid]

I have a ATI 1000HP RB26 damper

[Ae86Joker]

I have a ATI 1000HP RB26 damper

I'm not looking to spend that much. Lol. How much you selling it for?

[91300zxttkid]

Pending sale on Tial bov and 1 Tial wastegate..

ATI Damper with the water pump pulley I can do for 420 shipped

RB price knocked down another 500!! $5000.00 for the Built RB Longblock!

[AndrewHuffman]

I wish I had the money for the coils... Maybe in a few months...

[ghudson]

I'm doing a 300zx tt trans on my rb25 (s13) and just wondering if you know the length of your driveshaft? I need a shaft that's about 2 inches shorter than the rb25 trans/s13 conversion driveshaft... If you could shoot me a length deminsion that would be great! Very interested in it!

[91300zxttkid]

Back up! The Comp Turbo is sold!!

Some one get this Motor!

[91300zxttkid]

Motor is going to an unbelivable 4700 picked up for the longblock..

Whole engine with manifolds and fuel system Fire sale at 7k picked up.
Come and get it

Rolling chasis with race coilovers.. cage.. and wheels.. 2k come and get it!!

TT 5speed 2+0 driveshaft still for sale
Smoked side corders..
Powertrix race coilovers 850 shipped
Powertrix RUCAS 185 shipped
Thermostated oil cooler set up NEW NEW NEW 300 shipped

[91300zxttkid]

Rolling chassis has been SOLD

Driveshaft, Built RB, Transmission, smoked 300zx turn signals, Megasquirt ECU with harness, intake and ehaust manifolds.. ectt ALL STILL FOR SALE!

[zil32]

How much for ARP Main and Head studs
!

[91300zxttkid]

Rolling chassis is SOLD SOLD SOLDSSS

I have a Brand New EP Racing one piece drive shaft for a 1990-1996 Z32 TT 5speed 2+0 for sale still will let go for 190 shipped

Have a brand new set of Z1 Motorsport Smoked turn signals as well.. these will work for every bumper EXCEPT the Jscpec front end.. 85 shipped

and I have the Built RB, have the rebuilt Trans, the clutch, exhaust manifold, intake manifold, and full fuel rail and Injector dynamics 1000cc injectors still.

Buy buy buy!!!! Will let the motor go at a steal right now!!! I have the move soon and I need this thing out of my kitchen lmao!! I'll take as low at 4k for the longblock, includes the ATI damper with it!!!!!!!

Come on people!! Screw these V8 swap guys.. remind em what screaming wastegates and Inline 6 Japanese Muscles is all about!!!!!

[91300zxttkid]

Driveshaft is now also sold..

Smoked turn signals still avaliable for 300zx

The Fully Built RB is still available, (Deal!! Motor, with clutch, fuel rail, ID 1000cc injectors, intake manifold, exhaust manifold, tial waste gates, and tial Q bov, with clutch and flywheel for 6k OBO!!!) cOME ON!!!

RB/Z32 transmission 500

I am really in a a rush to sell this stuff!!!! Make some offers, and I can help with driving to meet anyone with the RB.

[dcreech0]

Still needing that flywheel. Sent you pm a while ago.

[91300zxttkid]

^^ I never said anything about parting out the motor..

The engine comes with the clutch and flywheel...

The engine with everything $6000.00 Come get it!!!!! OBO!!!

[dcreech0]

Thought I read in op that Ty had an own one for sale for 60 bucks shipped.

[dcreech0]

***oem*** correction

[91300zxttkid]

A lot better description and info about the motor..

TwinTurbo.NET: Nissan 300ZX forum - Fully BUILT RB25 engine/RBZ32 transmission/TIAL/ATI/GReddy/ (http://twinturbo.net/nissan/300zx/forums/classified/view/163999/Fully-BUILT-RB25-engineRBZ32-transmissionTIALATIGReddy.html)

[EnemyS15]

Very interested in the BOV~! best price shipped to 33612

[Nismo JLo]

maybe a dumb question but would you sell the rb25 bellhousing? Possibly interested in clutch/flywheel parts as well

[91300zxttkid]

Sorry, updating the post now, everything has been sold, all I have left is the megasquirt standalone ECU with harness.. Thanks. I have the sparco Torinos as well, however kinda keeping them for the next car I get unless I get a good offer on em. The 300zx Z32 rails and sliders I will part with though..

[91300zxttkid]

I'm still getting messages over a year after this thing was sold off. I'm pledging to build another one of these things again when I have a garage of my own. I miss the Z community so much.

Anyway, the real point if this post..¥¥¥



Everything is SOLD!!!