PDA

View Full Version : OH RB26 Epic Part Out....!


faStE-R
05-13-2012, 06:30 PM
well i had an injector stick open on the dyno, hydro locked the motor, bent a rod and damaged the crank... at this point im burnt out so epic part out time. most of these parts have hardly any run time on them.

-Tomei Oil pump, maybe 50miles worth on run time on it.... SOLD
-fluidaper crank pulley, good for 12k rpm and no power limit..... SOLD
-greddy timing belt, 50 miles..... SOLD
-CAS, good working order....SOLD
-OEM T-belt idler and ten, 50miles..... SOLD
-RB25 oil pan, modded to fit rb26 and has 1/8th npt bung for oil temp sensor....100
-RB26 built head, with kelford 272-10.0mm lift cams, manley springs, retainers, and locks, supertech bronze valve guides, 3 angle valve job, new valve seals, intake side quinch pad removed, ports have be knife edged and smoothed, exhaust side humps removed, milled .002 for smoothness, has been shimmed perfectly for these cams. the head is good for over 10,000 rpm. there is lots of hours and time and money in this head..... 2200
-Custom one off MAS FAB intake manifold with Q45 thottle body, comes with modded IAC valve, and plate that goes between head and intake. the balance port holes have been welded shut and it has 3 -6 ports for the GT head cooling mod. this is a nice part, last year i made 660whp on 23psi, this year with this intake and some head porting i made 725 whp on the same boost. also comes with B13 throttle cable that is modded to work in S chassis.... SOLD
-RB25DET transmission, perfect shape, no grinds... 750
-Mckinney motor mounts, s13 with rb26, but for 30 bucks more buy the rb26 mount brackets and they will work on a rb25 swap... SOLD
-drive shaft shop drive shaft, mckinney mounts, s13, abs diff.....200
-Powerhouse racing RB26 Fuel rail, this is a real nice part, dual -8 feeds and a -6 return. 11mm injector holes....300
-RB26 Valve cover full set, comes with everything in the picture, wrinkle black coated, -12 an fittings welded for breathers.... 350
-RB26 ARP head studs, been tighted down once. still perfect.... SOLD
-Quest alternator upgrade for RB motors, complete kit, all the hard work done... just bolt it on..... SOLD
-Split fire coils, external ignitor style... SOLD
-RB26 engine harness, been totally takin apart and all BS removed, wired for a s13 swap, covered in nice painless wiring covering. just needs to have whatever maf you run wired in.... 200
-stock crank timing gear and plate.....SOLD
-cas holder braket... SOLD
-starter... 80
-nismo thermostat... SOLD
-4.63 Ring and Pinion with brand new pinion bearing....250
-Rb26 Block with 86.5mm bore. comes bear just block, main caps and bolts....300

All prices are OBO, i want these parts sold, if you dont like the price try me... worst i will say is no. let me know if you need more info or pics of something. best way to get ahold of me it is text or call me... 513-276-0993

http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0164-1.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0206.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0205.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0204.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0200.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0199.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0198.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0196.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0203.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0195.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0194.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0193.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0190-1.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0186.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0184.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0187.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0183.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0182.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0181.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0180.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0179.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0178.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0177.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0176.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0173.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0174.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0175.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0172.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0170.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0171.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0169.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0168.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0167.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0166.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0165.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0112-1.jpg
http://i220.photobucket.com/albums/dd240/Faste-r/IMG_0129.jpg

mazdanissan129
05-13-2012, 07:14 PM
PM sent about the Head

s14k
05-13-2012, 07:17 PM
Pmed you on parts

BlewByYou
05-13-2012, 07:52 PM
Will crank pulley fit rb25? Pm me if so

aligoodn
05-13-2012, 08:13 PM
sorry to hear about the motor; bump for some sweet rb parts

faStE-R
05-13-2012, 08:16 PM
PM sent about the Head

i didnt get it, try one more time... or call/text me

noodl35
05-13-2012, 09:06 PM
Pmed youUuu

projects
05-13-2012, 09:16 PM
what manifold and wastegate set up did you have? and are they for sale?

VAs13
05-13-2012, 09:30 PM
fuck i want that intake manifold

Creizai
05-13-2012, 10:02 PM
What injectors were you using it if you don't mind me asking, Im from Fairfield too. What's your first name bro?

mazdanissan129
05-14-2012, 02:52 AM
i didnt get it, try one more time... or call/text me

I sent you another one...

faStE-R
05-14-2012, 07:14 AM
Turbo manifold and wg sold to my buddy. I was using five 0 motorsports 2000cc's, those are the ones that stuck open.

RBPOWERED240
05-14-2012, 07:34 AM
my five-o 750 stuck wide open also, man fuck that brand, thats why I'm going with injector dynamics. oh and thanks for the Mckinney kit op.

nenelopez
05-14-2012, 03:49 PM
Would u take 180 shipped for driveshaft

Flaco S14
05-14-2012, 10:07 PM
dam I need that trans ASAP!

faStE-R
05-15-2012, 06:01 PM
dam I need that trans ASAP!

lmk, ill split the shipping with you

RB26DevilZ
05-16-2012, 10:17 AM
Hello, do you still have cas holder bracket? What about crank timing gear? Thanks!

faStE-R
05-16-2012, 10:45 AM
Hello, do you still have cas holder bracket? What about crank timing gear? Thanks!

Yes I do, pm me if you would like to buy them

noodl35
05-17-2012, 09:29 PM
Thnxfor the pUlley, fast shipping too.

faStE-R
05-20-2012, 09:06 AM
Make offers!

angels one
05-20-2012, 09:59 AM
Do u have oem crank pulley? Pm me a price if u do

RB26DevilZ
06-01-2012, 08:17 PM
Received CAS, Bracket, and Crank Timing, Gear! Legit and Honest Seller! Excellent Transaction from start to finish, Thanks!

doyle4281
06-18-2012, 09:42 PM
Great setup, free bump.....

RB_Powered_S13
06-18-2012, 10:29 PM
does that starter fit rb25det?

Flaco S14
06-18-2012, 11:10 PM
what is the Ring and pinion out of?