Wtb:s14 manual driveshaft

[1hondaguy]

PM ME WITH YOUR NUMBER AND MUST BE S14 MANUAL DRIVESHAFT DONT SEND ME AN AUTOMATIC DRIVESHAFT.

yes there is a difference between the driveshafts.

S13-1st section (no difference for ABS/non-ABS):
M/T: 395.0mm (15.55")
A/T: 432.0mm (17.01")

S13 2nd section (no difference for MT/AT)
non-ABS: 605.0mm (23.82")
ABS: 590.0mm (23.23")

S14-A/T 1st section = 421.0mm (16.57")
M/T 1st section = 441.0mm (17.37")

S14-ABS Rear Section = 636.0mm (25.04")
non-ABS Rear Section = 650.0mm (25.59")

[Memberofthe600hpkaclub]

What part of fl u in

[horse110]

u abs or non abs?

[sdrmiami]

i have a 5speed s14 1pc steel drive shaft shop never used just mounted looking for 220

im in doral fl

[1hondaguy]

I live in the tampa bay area i can meet anywere around there to pickup part and i recently swapped rb25 with rb20 transmission the reason for doing so is i can use factory driveshafts since im not going over 400 hp yet to keep my cost down if i blow the tranny ka internals swap to the rb bell housings and im non abs . thankyou pm me your numbers and parts appreciate the help putting my car back to drive.