WTB: SR20DET parts!!

[JDMwannaBE]

I'm in the process of building an SR, and looking for just about anything you guys may have laying around. From the valve cover to the oil pan! NOT looking for any stock internals such as cams, pistons, rods or valves. REALLY REALLY need a block and head to get me started. Doesn't matter if theres a spun bearing, or if there's zero compression. Just as long as it's something I can work with. Also, as far as the head, and intake manifold, are concerned, I'm looking for those to be S14 SR parts. Let me know what you guys have! Thanks for your help!

Email me for a faster response [email protected] it's connected to my phone, and I'll get right back to you.

[91ka24]

I have a stock s13 Sr intake manifold, knock sensor, and cold pipe for front mount if your interested

[bussitcustoms]

I have a block, pistons, rods, a crank, and a spare head. $100 for the shortblock assembly, $50 for the head. Head needs two valves.

[drftx]

stock sr cams - intake mani - ivac - alternator - water pump - and more


http://zilvia.net/f/sale-items/450238-sr20det-garage-clean-out.html

[zneubauer]

cams, tps, intake mani, oil pan, a whole bunch of stuff.

[JDMwannaBE]

PM' sent. Not looking for internals right now. Mainly sensors, manifolds,engine accessories, etc., and of course the block and head. Thank you all for responding! Keep it coming!

[JDMwannaBE]

I have a block, pistons, rods, a crank, and a spare head. $100 for the shortblock assembly, $50 for the head. Head needs two valves.

What model is the head? (S14/s14?) Got any pics, very interested. Email me for a faster response [email protected]

[JDMwannaBE]

I have a stock s13 Sr intake manifold, knock sensor, and cold pipe for front mount if your interested

May be interested in a couple things, have any pics? Thanks!

[JDMwannaBE]

cams, tps, intake mani, oil pan, a whole bunch of stuff.
May be interested. What model engine is the mani from? What other stuff you have? Any pics? Thanks!

[JDMwannaBE]

*bump* still need a block! :)

[richrosco]

I have a complte BUILT redtop longblock, PM me

[xstevenxcv]

I have S14 blacktop notchback bare head, full intake manifold/throttle body/IACV setup, PM me

[zneubauer]

May be interested. What model engine is the mani from? What other stuff you have? Any pics? Thanks!

http://zilvia.net/f/sale-items/450859-come-get-shit.html

ahh shit I just read you need s14, the intake mani is s13.

[xstevenxcv]

All my parts are for S14 Blacktop SR

[Shift n Drift]

upper and lower oilpans, oil pump, rear main seal plate, dipstick, block that needs 2 sleeves already bored to 86.5 or 87 i forget, s14sr intake manny, i can possibly drop all this stuff off may 31, and a used but still reusable apexi 87mm 1.2mm head gasket and a crank

[JDMwannaBE]

http://zilvia.net/f/sale-items/450859-come-get-shit.html

ahh shit I just read you need s14, the intake mani is s13.

It's all good, thanks anyway

[JDMwannaBE]

All my parts are for S14 Blacktop SR

Can you email me some pics?

[JDMwannaBE]

upper and lower oilpans, oil pump, rear main seal plate, dipstick, block that needs 2 sleeves already bored to 86.5 or 87 i forget, s14sr intake manny, i can possibly drop all this stuff off may 31, and a used but still reusable apexi 87mm 1.2mm head gasket and a crank

Drop off? :)
Prices and pics please! Thanks!

[trikk]

I got got an s14 sr head, intake manifold, and a couple sensors. Lmk.

[Shift n Drift]

shit i forgot to check this, im already back home, but i have a complete s14sr head with valves and springs installed, shimes lifters and rockers all bagged and tagged with intake manifold, with throttle body, and iacv and all the other stuff, send me a pm