LOWERED PRICES! Tomei-Greddy-HKS-AEM-Origin-StopTech-TONS MORE!

[Imarvin240]

MORE PARTS AND PICTURES ADDED!!! PRICES REDUCED!!!

AEM Water/Methanol Injection Pump
- NEVER USED
- $100
http://sphotos.xx.fbcdn.net/hphotos-ash4/s720x720/398264_10150834798891754_526896753_11628514_924582 708_n.jpg

AEM Water/Methanol Injection Controller
- NEVER USED
- $100
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/523764_10150834798201754_526896753_11628512_833222 654_n.jpg

SR Timing Chain Tensioner
- ~3k miles
- Perfect Shape
- $50
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/420668_10150723302656754_526896753_11266504_177396 3129_n.jpg

HKS Timing Gear
- ~3k Miles
- Perfect Shape
- $125
http://sphotos.xx.fbcdn.net/hphotos-ash4/s720x720/422987_10150723254581754_526896753_11266163_193730 0022_n.jpg

Tomei Timing Gear
- ~3k Miles
- Perfect Shape
- $125
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/416856_10150723253486754_526896753_11266156_150068 1096_n.jpg

Cam Angle Sensor
- ~3k Miles (purchased NEW)
- PERFECT SHAPE!
- $175 (retails over $350)
http://sphotos.xx.fbcdn.net/hphotos-ash4/s720x720/419872_10150723255911754_526896753_11266170_158037 859_n.jpg

WRX 05' Head Unit
- Perfect Shape
- $100
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/564919_10150834799491754_526896753_11628515_567198 11_n.jpg

Intake and Exhaust Cam Gear Bolts
- PERFECT SHAPE!
- $5 each
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/389608_10150742104266754_526896753_11334834_230685 035_n.jpg

Tomei 270 Camshafts
- PERFECT SHAPE
- ~3k Miles
- Stamps on cams: 272 5sn and 272 5sx
- $320
http://sphotos.xx.fbcdn.net/hphotos-snc7/427318_10150742100401754_526896753_11334820_232097 818_n.jpg

Greddy Oil Cap
- PERFECT SHAPE!
- $50
http://sphotos.xx.fbcdn.net/hphotos-snc7/421055_10150723290811754_526896753_11266439_174561 1511_n.jpg

KU Engineering S13 Intake Manifold
- Never Used (just sitting around for about 3yrs, but the last owner drilled injector port 1 larger to put larger injectors in but then sold it to me...costs about 60 to do it to the other 3 or 40 to correct port 1)
- $175
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/387242_10150480663521754_526896753_10439243_731518 754_n.jpg

Origin Canards w/ custom aluminum skid plates
- never used
- $125
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/308177_10150480657076754_526896753_10439219_658759 127_n.jpg

SR20 Upper Oil Pan - SOLD!
SR20 Oil Pump - SOLD!
SR20 Oil Screens (2 sets)
SR20 Rear Crank Case Cover (3)
SR20 Oil Block Galley w/ Sensor (2)
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/396250_10150613024401754_526896753_10920871_747358 470_n.jpg

Unknown Brand BOV
- Slightly Used
- PERFECT SHAPE
- $50

SR Main Cap Girdle
- PERFECT SHAPE
- $25 each
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/533372_10150834795496754_526896753_11628504_135650 5300_n.jpg
SR Coolant Tubes - one left
- PERFECT SHAPE
- $15 each
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/426733_10150613024936754_526896753_10920873_143325 7245_n.jpg?dl=1

OEM SR20VE P11 Valvetrain (IN+EX Valves, Springs, Cams, Gears)
- 15,000 Miles
- PERFECT!
- MAKE OFFERS ON WHAT YOU NEED!
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/419996_10150615750161754_526896753_10929456_203418 5802_n.jpg

Evo VIII MR Shift Knob
- PERFECT SHAPE
- $20
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/406384_10150615758101754_526896753_10929476_142793 581_n.jpg

SR20DET AAC Valve (1 NEW /1 USED)
- PERFECT SHAPE
-NEW- $110 - SOLD!
-USED- $50
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/396371_10150615770456754_526896753_10929502_136544 8619_n.jpg

stock KA24de airbox intake system and Filter is still clean (came from a 98' kouki)
- PERFECT SHAPE
- $75
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/395569_10150613036421754_526896753_10920911_184224 8499_n.jpg

Fuse Relocation Setup
- PERFECT SHAPE
- $30
http://sphotos.xx.fbcdn.net/hphotos-ash4/422766_10150664132726754_526896753_11067832_367606 68_n.jpg

S13 Non-ABS Driveshaft
- Used
- $100

SR20 Water Pump
- Great Shape
- $30

S13 SR Transmision -
- Roughly 30k miles
- PERFECT SHAPE
- $150
http://sphotos.xx.fbcdn.net/hphotos-ash3/s720x720/581233_10150834790411754_526896753_11628495_953830 84_n.jpg

SR20 Coilpack Gaskets
- NEW
- $3 each
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/401550_10150613032626754_526896753_10920890_199185 4231_n.jpg

S13 SR20 Valve Cover Gasket
- Perfect Shape
- $20

(8) SR OEM Rocker Arm (1 Set)
- Used
- $5 each
http://sphotos.xx.fbcdn.net/hphotos-ash4/407566_10150664138351754_526896753_11067846_113604 3108_n.jpg

(16) OEM Spring, Retainer, and Keeper (1 set)
(8) SR OEM Intake Valves (1 set)- SOLD
(8) SR OEM Exhaust Valves (1 set)- SOLD
(8) SR OEM Lifter (1 Set)- SOLD
- Used
- $5 Each
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/426834_10150613026521754_526896753_10920875_117133 950_n.jpg

(3) SR OEM Rod
- Great Shape
- $10 each
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/426766_10150613024081754_526896753_10920869_141501 1659_n.jpg

SR OEM Exhaust Manifold w/ Heat Shield
- Perfect Shape
- $40
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/424073_10150613027986754_526896753_10920878_142131 5639_n.jpg

Mr. Gasket (Copper) sr20det
Other sr20det Exhaust Gaskets (t3, T4, Exhaust mani)
- Perfect Shape
- $15
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc7/423756_10150664135466754_526896753_11067841_392741 920_n.jpg

Crank Pulley Bolts (2)
-Perfect Shape
-$5
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc7/430968_10150664145311754_526896753_11067863_185757 1698_n.jpg

Transmission Mount Brackets
- Perfect Shape
- $10 each
http://sphotos.xx.fbcdn.net/hphotos-ash4/401191_10150664161831754_526896753_11067931_429516 216_n.jpg

Alternator Brackets
- Perfect Shape
- $30 each
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/432308_10150664167686754_526896753_11067939_104651 3063_n.jpg

Knock Sensor (4)...one doesn't have a sub-harness
- Perfect Shape
-$30 each (15 for the one without the sub-harness)
http://sphotos.xx.fbcdn.net/hphotos-ash4/419805_10150664174196754_526896753_11067961_194880 5439_n.jpg

Godspeed Arm - $15
S13 Rear Links - $10 each
S13 Front Lower Control Arm - $30
http://sphotos.xx.fbcdn.net/hphotos-ash3/s720x720/527865_10150834796161754_526896753_11628506_861054 377_n.jpg

Thermostat Housing- $10
Coolant Temp. Sensor Housing- $10
Coolant Inlet/Outlet- $10 Each
http://sphotos.xx.fbcdn.net/hphotos-ash4/395291_10150664178951754_526896753_11067980_274488 486_n.jpg

\/ \/ \/ 350Z PARTS \/ \/ \/

350z StopTech Front BBK (was going to use them on my new build but im going with something else now. This setup retials for around $3,000)
6-Piston Front with 2-Piece Rotors
- ~5k miles
- $1,400 (retails for ~3k)
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/226618_10150228256911754_526896753_8583484_4327292 _n.jpg

350z LSD
- ~15k miles
- $250
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc7/432218_10150650103851754_526896753_11029059_786778 865_n.jpg

350z OEM Suspension Links
- ~15k miles
- Perfect Shape
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/578017_10150834796931754_526896753_11628510_602944 547_n.jpg

350z Master 1 1/16th
- Perfect Shape
- $50
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/311300_10150480660336754_526896753_10439232_184169 1997_n.jpg

350z Brake Booster
- Perfect Shape
- $120
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/375534_10150480661776754_526896753_10439236_140716 3513_n.jpg

350z 03' tinted tail lights
- Great shape
- $90
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/296301_10150443557066754_526896753_10313803_891397 841_n.jpg

350z OEM Fuel Tank
- ~20k miles
- Perfect Shape
- $90
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/386930_10150441022336754_526896753_10306956_637312 489_n.jpg

350z Seats
- ~20k miles
- $300
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/312088_10150442097401754_526896753_10309990_409811 740_n.jpg

350z oem Radiator
- ~20k miles
- $100
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/318612_10150463727896754_526896753_10387765_723530 003_n.jpg

350z oem Radiator Support
- ~20k miles
- $100
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/419029_10150614367566754_526896753_10925209_371548 961_n.jpg



These are all the make an offer items...i dont want or need them so just make an offer...pictures of these upon request.

(2) Cam Oil Tubes (1 Set)
(3) Different SR20 Timing Chain Guides
3” S14 Exhaust that was very hacked up but it has a Very good condition HKS muffler
stock KA24de header + stock heatsheild

Thank You For Looking!

[PeaceOnesxWai]

Did you ship out the water inlet/outlet?

[Zerolift Autolab]

still waiting on paypal addy via pm ?? ......(canards)

[heiyuu]

still waiting on paypal addy via pm ?? ......(canards)

aww man wtf ive been trying to buy those from him for like 2 months... so disappointed. never got a shipped price or paypal addie.

[Imarvin240]

alot has been going on in my personal life (death of a friend and medical problems within the family) I havent had the time to respond to anyone about the canards. I will PM both of you tonight. besides that, I have some new items in this thread along with new/more pictures.

[Seraphim38]

sold the KU engineering manifold yet? I can't help but be tempted even though I don't need it.

[heiyuu]

alot has been going on in my personal life (death of a friend and medical problems within the family) I havent had the time to respond to anyone about the canards. I will PM both of you tonight. besides that, I have some new items in this thread along with new/more pictures.

Alright homie thanks for the reply :-D Sorry to hear about your loss.

[saliaga08]

is the trans cracked or anything?

[Imarvin240]

nah, trans is good. I even have an extra bell housing if you want :)

[heiyuu]

nah, trans is good. I even have an extra bell housing if you want :)

So any luck getting a shipped priced to 58265 for them cannards?

[di-devol]

Hi, I need an sr oil block and the used aicv shipped to 97006 please!

[heyitzalan]

have you shipped my s13 head yet?