PDA

View Full Version : No starter signal on S14


babowc
04-23-2012, 04:11 PM
I'm getting zero starter signal on my chassis..
I know the motor/starter/ECU is good, but when I go to click the ignition to start, I get nothing!

I checked the 7.5amp fuse and that's intact.
I checked lower harness wiring and that seems to be good too.

I spliced the signal wire coming off the starter and ran it on a wire to tap on the battery and it works fine.

Any ideas?

91ka24
04-23-2012, 04:22 PM
Ign switch man. Happened to me. It's a quick and easy fix, or u could just run you a push start button.

91ka24
04-23-2012, 04:23 PM
First check your neutral safety switch, then if that's fine, ign switch lol

babowc
04-23-2012, 04:40 PM
The chassis is a native manual chassis.

Which ignition switch are you talking about? This?: http://img404.imageshack.us/img404/8756/zzzzxxok5.jpg

I know S13 has these on the back of the ignition/key lock(whatever you call it), but do S14s also have it?

91ka24
04-23-2012, 05:36 PM
That's it. I havent seen a s14 one but that looks really similar to the s13 ign switch

koukimonster139
04-24-2012, 07:15 PM
check your clutch pedal. closely.

babowc
04-24-2012, 09:19 PM
^that helps a lot?...
I know the S14 has two switches. They're both engaging/disengaging. Problem is that I don't know whether the switches are good or bad.