SR20 Super Part Deal!

[Angronrb25]

Well it is time for me to sell the SR in my coupe. This motor has been super good to me. I am still in debate if I am even going to keep the body so for now I am selling the motor till I decide.
Motor is still in the car running and driving.
This is the most complete setup ever!
Leonidas Motor
Z32 MAF
CMS Intercooler Pipes
Greddy TD06SH 20g
Unknown Front Mount Intercooler
Greddy Type RS Blow Off Valve
Greddy Intake Manifold
Greddy Fuel Rail Adapter
Nismo 740cc Injectors
Greddy Oil Cap
Greddy Rocker Arm Stops
BC 264/264 Intake Exhaust Cams
BC +1mm Over Sized Vales
Slight Port and Polish Head
BC Titanium Springs and Retainers
ARP Head Studs
Apexi 1.1mm Head gasket
ARP Rod and Main Bolts
ISIS Oil Pan
Greddy Exhaust Manifold (CMS modified for LHD)
Greddy 44mm Waste gate w/screamer pipe
Greddy Down pipe
ISIS Test Pipe
ISIS 3” Exhaust
Mishimoto Radiator
Greddy Radiator Cap
ISIS Silicone Hoses
ISIS Pulleys
Sard Fuel Pressure Regulator w/gauge
Splitfire Coil Packs
Nismo Motor Mounts
Nismo Tranny Mount
DSS 1pc. Aluminum Driveshaft
S13 SR to S13 Wiring Harness
Enthalpy Tuned Ecu
3 60mm Greddy Gauges
Greddy E0-1
Greddy Turbo Timer
AEM Wideband
Only thing wrong with it is the Enthalpy Tune makes the car run rich, but I have the fuel pressure set lower to compansate some!
Basically I will pull straigt out of my car and give you everything! I am only keeping the Overflow tank and the Chase Bay Power Steering Canister.
This is a Intercooler to Exhaust swap for sale!
Asking 6k for everything.
I will part out only if I canget some of the big items sold! I.E. Turbo Kit, All Gauges, Long Block, etc.
http://i106.photobucket.com/albums/m272/monica24_00/479028_439952812687661_100000188370800_1951013_531 471149_o.jpg
http://i106.photobucket.com/albums/m272/monica24_00/475139_439952352687707_100000188370800_1951009_183 1625993_o.jpg
http://i106.photobucket.com/albums/m272/monica24_00/474088_439952669354342_100000188370800_1951011_173 7542936_o.jpg
http://i106.photobucket.com/albums/m272/monica24_00/468252_439986602684282_100000188370800_1951439_658 595210_o.jpg
http://i106.photobucket.com/albums/m272/monica24_00/462739_439988016017474_100000188370800_1951486_202 3726589_o.jpg
Thank you
Leonidas
832-428-9673

[godrifttoday]

6k and no car??

[Angronrb25]

6k and no car??


Yes sir! The Turbo Kit alone is 4500-5500 new. I feel it is fair and I am Negotiable.

[Edwin562]

price is abit high, Got a dyno sheet to see the number this motor can produce?

[Angronrb25]

price is abit high, Got a dyno sheet to see the number this motor can produce?

Honestly Mr Edwin, I believe it would be hard to find little lone build a SR with these quality parts for under 6k. Turbo kit alone from RHD Japan is 5400. This is an authentic kit not a ebay slap together top mount. Gauges are another 1400 or so. 2 Greddy Peak and Hold 60mm guages, 1 Electronic 60mm, 1 AEM Wideband, 1 Greddy Turbo Timer w/Harness, 1 E0-1 Electronic Boost Controller. So now I have surpassed the 6k I am asking and havent even touched the block, head, driveline.

This is a FULL SWAP. All Electronics, Motor, Turbo, Driveshaft, Exhaust, Harness, Radiator, Oil Cooler, All Mods, and Everything to pull out of my car and into the next s13!

[dave7]

I might be interested in injectors and maf if you part out.

[sr20time]

interested in FPR and your Intake Tubing into the greddy intake.

[heiyuu]

price for these parts shipped to 58265 please!

Greddy Intake Manifold
DSS 1pc. Aluminum Driveshaft if it is for a non-abs

[Angronrb25]

price for these parts shipped to 58265 please!

Greddy Intake Manifold
DSS 1pc. Aluminum Driveshaft if it is for a non-abs

I might be interested in injectors and maf if you part out.

interested in FPR and your Intake Tubing into the greddy intake.

I will part if the turbo kit sells! That will fund the shipping and starting of the next motor build!

[1slicktwo4oh]

If you part..interested in the greddy oil cap, coolant temp adapter, coilpack cover shipped to 90602

[Angronrb25]

If you part..interested in the greddy oil cap, coolant temp adapter, coilpack cover shipped to 90602

Like I said only if the Turbo kit sells!

[CeezS13]

For everything you're getting with it, the price seems fair. What numbers is this set up putting down?

[Angronrb25]

For everything you're getting with it, the price seems fair. What numbers is this set up putting down?

The Turbo is good to 470ish I had a FP 20g before this turbo and the oversize valves and made 417whp.

I am talking with enthalpy now about the running rich problem

[Angronrb25]

If you part..interested in the greddy oil cap, coolant temp adapter, coilpack cover shipped to 90602

If I get the turbo kit sold then I will part!

[Angronrb25]

Bump #1

Any offers?

[Angronrb25]

Bump #2

Any offers?

[Angronrb25]

Greddy TD06SH 20g(good to 460ish whp)
Greddy Exhaust manifold(modified for LHD)
Manifold Header Wrapped
Greddy R08 External wastegate w/screamerpipe
Greddy Downpipe

All for 2500obo!

If anybody is interested! I am also negotiable on the kit!

[Akuma]

Damn that whole setup would be nice...
Wish I had a spare 6k... :)