PDA

View Full Version : Helpppppppppppp no start


UNDECIDEDFBODY
04-20-2012, 09:30 PM
Heeeeeeeellllllllllpppppppppp
I have a 89 5 speed se power windows,locks,mirrors,and back wiper
Motor,Trans and ecu with harness is out of a 90 5 speed base hatch

I just put my sohc 5speed in my 89 hatch, the car was a original 5speed. I hooked every wire up and now when I turn the key to start it the acc relay on drive side makes a click noise. At the same time the three relays on the passenger side fuse box clicks. Everything comes on light,interior,windows,wipers but no starting. I feels as if there is no signal going to ignition. I do not hear or feel fuel pump also

I used the 90 base harness with my se ecu


Any help will be greatly appreciated as I do not know much on this

Hashiriya415
04-20-2012, 10:08 PM
Why a car won't start - troubleshooting tips (http://www.samarins.com/diagnose/)

Walperstyle
04-21-2012, 02:24 AM
Clicking is battery is dead (usually) (not to mention you don't even hear the fuel pump prime)
However, if you just installed a 5 speed transmission into an automatic, you will have to realize that you will have to solder the neutral safety swtich (or whatever it is called) to be able to start the car.

240sxtechdvds.org has factory service manuals for free download. Dude also made a bunch of DVD's regarding DOHC cars if you ever were so inclined to swap for a DOHC engine.

ze12o
04-21-2012, 07:23 AM
checked your fuses?

Walperstyle
04-21-2012, 07:28 AM
checked your fuses?


and relays