Slamming need help insight

[Beaupro44]

OKay guys i am going to be slamming my s13 and need to get rid of the harness in the wheel wells. I am just looking to relocate them or get them out of way some how. Anyone done this i am sure there is a crap ton of people who have. Also i took the fender off the driver side today and snapped the two bolts that are on the ground side by the door what do you suggest i do to them. I am not trying to half ass this issues. I am glad i cought the wiring harness when i did because three wires were shredded. The big white one i have no idea what its for. The purple one which i think is for the radio. There is also a blue one that got shredded. Thanks for who ever gives a hand its much needed i am not trying to half ass this project and would just like some insight.

[RyanS13]

OKay guys i am going to be slamming my s13 and need to get rid of the harness in the wheel wells. I am just looking to relocate them or get them out of way some how. Anyone done this i am sure there is a crap ton of people who have. Also i took the fender off the driver side today and snapped the two bolts that are on the ground side by the door what do you suggest i do to them. I am not trying to half ass this issues. I am glad i cought the wiring harness when i did because three wires were shredded. The big white one i have no idea what its for. The purple one which i think is for the radio. There is also a blue one that got shredded. Thanks for who ever gives a hand its much needed i am not trying to half ass this project and would just like some insight.
:picardfp:

This shit has been talked about sooooo many times. All you had to do was search.

Pull the fender off, bend the metal lip down, push the wire up, zip tie it there, and hit it with a hammer to flatten it out more, & put the fender back on.

Get some self tapping metal screws to hold the bottom of the fender under the car where the screws broke.


Shits easy. Search next time and find the answers.

[Beaupro44]

sorry man i am new at this whole forms thing trying to work out the kinks. i did try searching
tho and i got a bunch of random stuff came up so i thought there was deleting of them. Thanks alot tho i can start to add to my list of things to do

[cotbu]

This is just the way our society is going. I guess! relocating a wire harness yielded, information you had to read, but you couldn't figure out what would work for you. even though you said i quote. I am just looking to relocate them or get them out of way some how. Thanks for who ever gives a hand its much needed i am not trying to half ass this project and would just like some insight.
There are what, like two ways to do this, and 2 places to put the harness.
what's with the warning after the stooges movie, anyway! That blew my mind!

[onehundredoctane]

Pay someone to do it for you.



/thread.

[OutlawLui]

Pay someone to do it for you.



/thread.

NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO :eek3:

[iveexcaped3]

Search wheel well wire tuck. Mods lock this up, its been posted a 1000 times, people just need to stop being lazy

[Pinggg]

Since i feel like being nice here you go.
http://zilvia.net/f/chat/407974-tucking-wire-harness-s13s-like-baws.html?highlight=tucking+harness

[Beaupro44]

Thanks man that was all i was looking for i may have went about it the wrong way sorry! All i needed was a direction.

[fliprayzin240sx]

Or you can unplug the harness from behind the dash and re-route the whole loom thru the engine bay.

[Beaupro44]

Or you can unplug the harness from behind the dash and re-route the whole loom thru the engine bay.
Do you know how many plugs there are about and where they are all at because i know how to take the dash out that's easy but wiring is one thing i sux at.

[fliprayzin240sx]

You dont have to pull the dash out. I popped all the trim under the dash, kick panel, steering collum, gauge cluster out. Followed all the wiring and disconnected them as I go.