S14/ KA24De Wiring Harness Removal

[naples-nissan]

It would appear that not too many people have done or are in the process of swapping an automatic ka24 for a 5 speed rb20det. However, I am. . and this is my first car. But i'm managing pretty well so far. Almost everything is in order, except for the wiring. I have a complete harness for my rb, along with it's ecu. Everything is ready to be dropped in for what I'm assuming is the last time. But how do I remove the original KA24 wiring harness from the car. How do i do this??

[future]

Wow, just wow

Mesg length

[Edwin562]

oh this is gonna be good.

[naples-nissan]

oh this is gonna be good.

what makes you say that?

[KoukiMonster0917]

Hey, I'm have an s14 with the rb20det harness I'm removing, I figure it should be close? When I take it out I can let you know whats up if you still need help. It's an old thread so pm me if interested.

[Dorifto Machine]

A search would of yielded you many results :fruit:

Follow this Guide:
S13 KA24DE Engine Removal : 240SX Technical Forum (http://forums.nicoclub.com/s13-ka24de-engine-removal-t299950.html)

Its pretty similar to removing the harness in your s14. Obviously disconnect all plugs in engine bay and pop grommet out. Unplug from ECU and disconnect dash connector plug ( It’ll be located behind the ECU in the back corner}, then disconnect the blue relay . Just take a look and you will see whats connected . Feed wires out of hole were grommet was. Done. Reverse to install said wire harness.


Dash Connector
http://t1.gstatic.com/images?q=tbn:ANd9GcT9J_-pRP7DIhWMqEs04oLNr5uPnDR04_FexQeXh6xqO36JJceT5VRXK DKJ

[KoukiMonster0917]

Yeah... I know how lol. The viper alarm attempt was (*****) rigged tho

[Dorifto Machine]

That was directed to the user who created this thread with the original question of "How To"

[KoukiMonster0917]

Haha ok, its kinda old. Wonder how it turned out.