DSM 450cc BLACK TOP HELP!

[oscarsx]

eeeh.. What's going on guys.. long day, my friend made a trip out here to hand me some black top DSM 450 cc injectors.. Installed a resistor box out of a honda, wired it all up etc. I have a ka24e... I took out the stock injectors, slapped on brand new oem o-rings for the dsm injectors.

When I tried slipping in the injectors to the fuel rail, I have a gap between the rail and the upper insulator. I've been searching and searching with no luck. I was hoping someone with experienced can help me out here and what my options are, thanks in advance..

Here are some pictures to show you guys what's going on. :bash::bash::bash::bash:
http://i1049.photobucket.com/albums/s382/dominguez122908/2012-04-14_20-19-25_111.jpg
http://i1049.photobucket.com/albums/s382/dominguez122908/2012-04-14_20-19-12_159.jpg

[oscarsx]

someone?:(

Sent from my DROID X2

[tunermt]

I used a small 3mm aluminum spacer under the rubber donut back when I ran evo 8 injectors on my sohc. ;)

[Jybfan04]

Aren't the DSM injectors side feed and the ka24e top feed?

[oscarsx]

dsm 450cc are top feed.

Sent from my DROID X2

[Jybfan04]

dsm 450cc are top feed.

Sent from my DROID X2

Gotcha, that would explain why the swap is a viable solution for a cheap upgrade..