PDA

View Full Version : Need help bogging issue !


gian52
04-14-2012, 01:28 PM
Hello guys my ka gets stuck between 2k - 3k rpm and it wont pass it. Ive replaced my maf with a working maf still same thing. what else could be a possible culprit. it also starts kinda weird and rough

DOS40SXCOUPE
09-19-2012, 07:39 PM
1.check ecu
since u already tackle down MAF

2. if you have turbo (u didnt mention) might be boost leak

s13-LBC-562
09-20-2012, 07:45 PM
might be your knock sensor or tps had same problem

Hardie
09-20-2012, 09:35 PM
Check:

Boost leak
throttle isnt stuck
BOV-if you have turbo
Boost controller
Fuel pump/injectors
TPS

If its non of the above might wanna look at possible blown gaskets.
Or check compression.

mckeeX)
09-21-2012, 10:22 AM
im having the same problem too! :(

BryanS14
09-21-2012, 01:22 PM
Ill bump this instead of starting a new thread. I have tried searching, but to no avail. My car (97 240 KA-T enthalpy tune) after warming up (driving 10 min) will just fall flat on its face and will not accel. Unplugging 02 made no difference, by passing the turbo and running N/A the car runs ok. Any ideas or help would be awesome!

Thanks!

Bryan