Serebros
04-14-2012, 12:03 AM
Hi/Low Sensor went bad, got another new one, took the old one off, all of the gas came out as expected. But I did not realize that much a/c oil was going to come out.
Car is a 93 KADE S13 COUPE, All Stock A/C Components
1. How much oil do I have to put back in, Can I just run a R134 Can that has oil added all in one?
2. What Kind Oil? PAG? What strength/thickness?
3. Can I fill the oil in from the hole underneath the hi/low sensor
4. Do I absolutely have to pull a vacuum before I refill the system with R134a?
5. Can I get away with not doing the vacuum and just filling it as is with oil?
6. If No, What is the cheapest/easiest way to do it? (Pulling Vacuum)
Thanks
Car is a 93 KADE S13 COUPE, All Stock A/C Components
1. How much oil do I have to put back in, Can I just run a R134 Can that has oil added all in one?
2. What Kind Oil? PAG? What strength/thickness?
3. Can I fill the oil in from the hole underneath the hi/low sensor
4. Do I absolutely have to pull a vacuum before I refill the system with R134a?
5. Can I get away with not doing the vacuum and just filling it as is with oil?
6. If No, What is the cheapest/easiest way to do it? (Pulling Vacuum)
Thanks