ARP Wheel Studs

[Evil S14]

I am researching a cheaper alternative to the Nismo or Kyo-Ei wheel studs and I am calling ARP tomorrow and seeing if they will create a limited production run of studs for our cars

i searched and saw that people used ones for a honda or camaro, which i don't get because the knurl for an s14 is .563" in front and a .511" in the rears, the camaro studs have a .509" which concerns me because if i were to put these on the knurls will eventually strip out, plus you'd have to use honda lugnuts (12x1.5)

If i can get these lug nuts they would probably be half the price of nismo studs, has anyone tried this or would anyone be interested if i could get them made?

[AceInHole]

My friend used the .509's in his car and they were fine. I've got them for the rear and haven't installed them yet. I'll let you know how it goes once I do.

For the Fronts I used .560 knurl Moroso studs. You sure you've got the front knurl diameter right? I had to grind the knurl down slightly on my moroso's to get em to fit.

[Evil S14]

My friend used the .509's in his car and they were fine. I've got them for the rear and haven't installed them yet. I'll let you know how it goes once I do.

For the Fronts I used .560 knurl Moroso studs. You sure you've got the front knurl diameter right? I had to grind the knurl down slightly on my moroso's to get em to fit.


i took the measurements from the nismo studs where it says the serration is 13x36T for the rears, 13mm converts to .511

serration for the rear is 14.3x36T, or 0.5629921

[Var]

dont you love getting jacked just cause you have an import?