94 JZS14 Build

[David B S12]

heres a video of my drifting my DD at my local oval track in northern VA earlier this season if your bored
David Bellomo s13 drifting at ods - YouTube (http://www.youtube.com/watch?v=FAQoyvtD8Lo&feature=related)

same run rear cam mount
David Bellomo ODS March 2012 Oval Drift - YouTube (http://www.youtube.com/watch?v=E2fvbVqdH9k)

external view of same run
S13 DAVID BELLOMO BALLS TO THE WALL ODS DRIFTING - YouTube (http://www.youtube.com/watch?v=rHoZb3hHphw)


Shit! 2012 season has started!
My 1jzgte S12 is gone and done for good (not sure if anyone on this forum saw it), im gonna build a new one later
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/cf3e3bd8.jpg
RIP


Received this awesome S14 from a good friend, a shell ready to go. Took the 1jz out of my 200sx and will be poppin it in this s14 that had been previously 1j'd. my goal is to qualify hyperfest comp in june!
It's dark ATM and my garage is full of other s chassis's ATM
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/55698c20.jpg

The power plant
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/0adba23c.jpg


First plan! Get a r154 shifter extension I didn't need one in the s12.. I'm on it

[David B S12]

heres some daylight iphone pics, car is dirty, needs some aero, i have lights and shit to put in it.. ill get on it.

thats my DD in the backround, stock sr/blahblahblah
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/1acf842c.jpg
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/84719e6c.jpg
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/ace14827.jpg
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/25cf099f.jpg
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/80d23e7b.jpg


installed the lights, they are stock. he included stock lights. i guess it had aftermarket ones before
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/ca37133f.jpg

[David B S12]

(as of 2 days ago)
gonna prepare the bay tomorrow, been stripping it down. Gotta make a bracket for the fusebox where its new position is.
maybe redo the fuel line setup, using double flared fittings

http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/964cfb8d.jpg
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/0931a516.jpg
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/1c0029e4.jpg

then i need to clean/tape it all up/paint

[David B S12]

(as of yesterday)
cleaned
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/da5d6a25.jpg
prepared/sanded some
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/e2e9181a.jpg
primed
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/89e8be96.jpg
finished
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/909c1783.jpg
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/10f01f2e.jpg





my S12 a few years ago had this color bay while it was sr'd. I think this blue goes well with the purple, might be using it on the cage/other accents in the car
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/105_4150.jpg

[Vitzio240sx]

Nice build keep it buddy

[dreamin240sx]

dude your s12 was the shit i cant believe you got rid of it but good luck man your an awesome driver.

[David B S12]

dude your s12 was the shit i cant believe you got rid of it but good luck man your an awesome driver.


thanks :)

that s12 was so beat, 4 + seasons and 7 motors took its toll. everyone gets a new chassis eventually, i need one that will aid me in tandem.. it was hard enough to keep the s12 together. called it quits when the 1j broke my diff for the second time, that SRA diff is hard to locate.

plus on the bright side look at what i ended up with, this s14 is awesome

[ShakotanGazelle]

Hi David! :D

(VVL from C-S12)

[Black240Ct]

nice jump from the s12,, what wing is that?

[ka24debt]

holy crap, no mercy on that sr lol! nice build and nice driving

[David B S12]

nice jump from the s12,, what wing is that?

idk. i need a parts list for the car lol.

[David B S12]

pluggin holes while i wait on a r154 shifter extension to pop the motor in

http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/355f7ca0.jpg

[kouki-mayne]

nice jump from the s12,, what wing is that?

It's a rocket bunny wing. My guess one from chaser though.


Hey david! It's Barnie, maybe we can tandem when you get your car together :)

[David B S12]

It's a rocket bunny wing. My guess one from chaser though.


Hey david! It's Barnie, maybe we can tandem when you get your car together :)

come to DN sunday after hyperfest!! If i have tires left after ill be burning them up there. Jefferson course tandem sessions ftw

[David B S12]

s12, s13, s14
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/ceeac679.jpg


got rid of one today
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/df4bf371.jpg

[M11's]

Your s12 was the reason I built by SR12!!! Hell Che

[David B S12]

inspiration is awesome! That S12 sure went there and back.. Such a cool experience.

some day ill build a SR'd coupe or something.. with IRS... the SRA diff sucks..

[M11's]

I did the IRS turbo model hatch with blacktop SR, s13 suspension and all corner s14 coils

[David B S12]

I did the IRS turbo model hatch with blacktop SR, s13 suspension and all corner s14 coils


hell yea, i want a IRS coupe, i got a SRA s12 coupe hidden in these pix^^^ above i might purchase someday



small update..
http://i367.photobucket.com/albums/oo119/whatrwedoingnow/iphone/3103d847.jpg
My girl washing the S chassis's ive got left (hit a wall on the RF last DN a few weeks ago with the daily), ill be getting a shifter extension made soon within the next week or two.
Excited! new job at toyota awaiting paychecks..

[sash_ak21]

Something about girls washing cars :)

[David B S12]

Something about girls washing cars :)


ill be sure to get some more pictures ;)

[flatout]

Something about girls washing cars :)

this^^

ill be sure to get some more pictures ;)

and thank you sir

[zuergJC]

nice build! very inspiring. good looking girl to, lucky you! :-)

[Zenki sr]

Nice build I was wondering where did u get that wing?? If u don't min me asking

[zuergJC]

Nice build I was wondering where did u get that wing?? If u don't min me asking
looks like rocketbunny 6666

[David B S12]

http://i1174.photobucket.com/albums/r613/dbellomojz/0b65518b.jpg

hood pins & hood spacers installed


interior pic, got a steering wheel and gonna source out a legal seat thats in date
http://i1174.photobucket.com/albums/r613/dbellomojz/ab9f15e4.jpg


my shifter extension should be done sometime this weekend, then i can get the engine on the hoist
looks like i could touch up the cage's paint job

[jdm2191]

Pics took a shit :(

[David B S12]

My second photobucket account maxed out bandwidth :( im making a new email/photobucket and will replace most of the pics today, the others will come back after the period is up (like a week or so sometimes)


Sorry guys

[David B S12]

http://i1174.photobucket.com/albums/r613/dbellomojz/3b2bb7a6.jpg

R154 extension is made! Excited now I can get started soon!

[David B S12]

http://i1174.photobucket.com/albums/r613/dbellomojz/33584ba7.jpg
All bolted up shifts fine, I'd like I invest in a shorter throw

Helpin my buddy sr swap his s12
http://i1174.photobucket.com/albums/r613/dbellomojz/798647ff.jpg

[David B S12]

http://i1174.photobucket.com/albums/r613/dbellomojz/4e2a0646.jpg

[David B S12]

ordering my mounts today :) then time to source some i/c piping to start mocking up what i need welded, ill have it over at a friends shop hopefully soon for that once the motors in, then i can measure/take my 1 piece from my s12 back to get it modified to
http://i1174.photobucket.com/albums/r613/dbellomojz/8e7d850a.jpg

progress on this sr s12 im helping out with, the bay should be done this weekend.. some welding/sanding to get it back to being clean
http://i1174.photobucket.com/albums/r613/dbellomojz/f07eb803.jpg

[David B S12]

awaiting motor mounts

cleaned trans
http://i1174.photobucket.com/albums/r613/dbellomojz/6d5b7cff.jpg

this swap ran fine before in my 200, so should have no issues on startup
http://i1174.photobucket.com/albums/r613/dbellomojz/eef0e49a.jpg

mounted i/c nice,stiff & level
http://i1174.photobucket.com/albums/r613/dbellomojz/091af548.jpg

[florante rea]

Looking good man. Btw did u rebuild ur r154? If so did u put the vss marlin crawler or just the dakota unit? It would be nice sharing installation of the r154 wiring all sensors:) i searched but no luck.

[florante rea]

R u going aem standalone or just the proven hks vpc/safc combo?

[David B S12]

R u going aem standalone or just the proven hks vpc/safc combo?


its a usdm r154 trans from the junkyard, supra mk3 turbo
and the ecu is stock, vvti

[David B S12]

waitin on motor mounts to come in!

repaired some front end damage on my dd s13
http://i1174.photobucket.com/albums/r613/dbellomojz/99c2d7fd.jpg

dope adjustable s12 office chair i made
http://i1174.photobucket.com/albums/r613/dbellomojz/0ff3a596.jpg

progress on this sr20 s12, bay is finished!! a buddy & i have been working on his car a bunch lately, getting it back on the road again finally, i'm just lending him garage space/giving ideas/doing some welding for him

repaired some holes from where the i/c piping went, it was all hacked up
http://i1174.photobucket.com/albums/r613/dbellomojz/075fb354.jpg
primed bay
http://i1174.photobucket.com/albums/r613/dbellomojz/bd1d8f50.jpg
lime splash!
http://i1174.photobucket.com/albums/r613/dbellomojz/68e1241b.jpg

[blo0d]

wow... that a bit much... i mean that in the why the fuck did you do that way ...

[David B S12]

wow... that a bit much... i mean that in the why the fuck did you do that way ...
your grammar is so stupid, not even gonna answer your question bro :duh:

[NismoTuner21]

Interested in my Power FC? BUYYYYYYY!!! lol

#/f/sale-items/432772-apexi-powerfc-1jz-gte-vvti.html

Build is looking good btw! GL!

[blo0d]

your grammar is so stupid, not even gonna answer your question bro :duh:

burrrn lol

[dreamin240sx]

your grammar is so stupid, not even gonna answer your question bro :duh:

No Fucks Given lol Love it keep it up man

[Pinggg]

Not my taste but build is coming along good.

[David B S12]

mounts came in,
http://i1174.photobucket.com/albums/r613/dbellomojz/142b3fbf.jpg

turns out they dont fit 100 percent, on the passenger side mount 2 of the holes didnt line up so i had to redrill one, and slot the other to make it fit.. the transmission mount might need some modification too from what i can see.. WHATEVER.. made it work.

some pics of the install, brings me a smile, im the dude on the left with the blue shirt. had some friends come over to avoid scratching shit up.

http://i1174.photobucket.com/albums/r613/dbellomojz/0ccea3a4.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/6f97d8c8.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/3b9f7538.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/5bc35e1e.jpg


i had to put 2 hockey pucks in between the mounts and the subframe for a good fit
http://i1174.photobucket.com/albums/r613/dbellomojz/6ee9a024.jpg

[David B S12]

made my trans mount solid, didnt have a rubber mount anyways
http://i1174.photobucket.com/albums/r613/dbellomojz/a32beab8.jpg


need to measure and take my 1j s12 driveshaft back to driveline to mate with the stock rear s14 2 piece
http://i1174.photobucket.com/albums/r613/dbellomojz/d17d4361.jpg

great rad clearance (ka koyo), will be making a aluminum shroud & fan setup
http://i1174.photobucket.com/albums/r613/dbellomojz/f757282d.jpg

shifter extension puts it right where i need it, sweet
http://i1174.photobucket.com/albums/r613/dbellomojz/447affbe.jpg

ill start mocking the piping up when i find or buy a kit to mock up

[jdm2191]

Should of got the Xcessive Mounts

[jellomonk]

+1 for hot chicks washing cars, nice idea for a build.

[David B S12]

bay is pretty much done minus the piping needs to be redone & so does the intake

http://i1174.photobucket.com/albums/r613/dbellomojz/1da43d70.jpg


race car trash lol
http://i1174.photobucket.com/albums/r613/dbellomojz/2789e7a0.jpg

side view
http://i1174.photobucket.com/albums/r613/dbellomojz/59f91174.jpg

relocated fusebox, still in the process of bringing the headlight wiring back to the headlights, this gives me room for a intake on the other side from where i had it down where the stock battery goes

http://i1174.photobucket.com/albums/r613/dbellomojz/ed38407c.jpg


using my in house, lol.. steel fan shroud for a bit until i get some money right, this time though a koyo radiator and sealing all the seams will give me some better cooling action, i sealed the fans to the shroud also.. ive got a 61.C mishimoto thermostat also
http://i1174.photobucket.com/albums/r613/dbellomojz/7b956139.jpg

heres my intake for now, if i have leftover piping after i redo the i/c piping ill do this in aluminum
http://i1174.photobucket.com/albums/r613/dbellomojz/10623dd8.jpg




LIKE!! on nexen @ facebook i need tires for hyperfest :( toyota treats me poorly in pay
me drifting my DD at ods a few weeks ago
http://i1174.photobucket.com/albums/r613/dbellomojz/d4264f3f.jpg
http://www.facebook.com/NEXENTIRE

link to my pic
http://www.facebook.com/photo.php?fbid=10151136005418378&set=a.10151114573253378.546141.418596553377&type=1&theater

[David B S12]

turns out the flange i used on my s12 is the same as the flange on my rear stock driveshaft piece
http://i1174.photobucket.com/albums/r613/dbellomojz/67f63661.jpg

measured 22 inches from the output shaft to driveshaft flange, dropped all the pieces off @ driveline today, ill have it driving in 2 days when i get it back!

swap all together 100 percent minus the driveshaft, ill be redoing the piping again later, i just need to distribute funds towards other things atm
http://i1174.photobucket.com/albums/r613/dbellomojz/a1fd40e7.jpg


made a downpipe to mate up with the exhaust that came with a car
http://i1174.photobucket.com/albums/r613/dbellomojz/84577424.jpg

clearance is swell, all above the frame rails
http://i1174.photobucket.com/albums/r613/dbellomojz/6ecedede.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/4b2f3dc9.jpg


startup vid
1jzgte vvti s14 240sx first startup - YouTube (http://www.youtube.com/watch?v=iYdv7LqTkjI&feature=g-upl)
iYdv7LqTkjI&feature=g-upl

[jdm2191]

sounds good...completly stock?

[David B S12]

sounds good...completly stock?
bone stock

[florante rea]

Ur quick bud, nice to see her running. Btw, what mounts do u have?

[David B S12]

Ur quick bud, nice to see her running. Btw, what mounts do u have?

ebay mounts and 2 hockey pucks per side

[David B S12]

now it officially drives! but ive got the the patience to wait & finish some more wiring etc before i go dumping clutch,
lost my shifter bushing? gotta order another one at work/toyota,
need to wire up that aem wideband pictured,
need to reroute the alt wiring through the cutoff switch, the killswitch isnt turning the car off ...
figure out how to use the stock tach if i can, would be nice
order and install a coolant temp sensor/guage
buy a seat, make seat rails, install seat
aquire RL overfender (most likley buying a pair)
yadda yadda more things on a big list ive got in my head

http://i1174.photobucket.com/albums/r613/dbellomojz/4e51f9a7.jpg

[David B S12]

got some 25 mm spacers for the front
got the wrong thread pitch studs XD
http://i1174.photobucket.com/albums/r613/dbellomojz/ddd4e2d1.jpg

just orderd some 240 ones at work & pressed em in, the front studs fit, rears dont due to a slim shank
http://i1174.photobucket.com/albums/r613/dbellomojz/1aa3fa2e.jpg


some sr20 s12 coupe progress
http://i1174.photobucket.com/albums/r613/dbellomojz/27c43619.jpg

[David B S12]

finally got it off the stands & drove it out of the garage, it sounds & looks so good.. Im so excited to drift a car like this finally :). Ive only drifted a KA S14 a long time ago..
ill be driving it at hyperfest june 16th if i qualify, & also driving the 17th @ Drift Nirvana. pumped!

pics of it outside letting it run, ill get more footage later..

http://i1174.photobucket.com/albums/r613/dbellomojz/bd453bdf.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/a08f4f82.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/7016e1c6.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/f5027db6.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/899103ce.jpg

still have tons to do! borrow a in date seat soon thats next, a battery box, gotta wire the wipers, & other things for tech!

[David B S12]

9uwMTxKcvSg

[NismoTuner21]

You weren't on 100% throttle leaving the driveway were you?

[David B S12]

You weren't on 100% throttle leaving the driveway were you?

nah, no seat, no shifter bushing, like 1 qt of trans fluid, just wanted to make sure the drivetrain actually works

[David B S12]

http://i1174.photobucket.com/albums/r613/dbellomojz/2b051415.jpg

started on a gauge cluster/switch panel, aem wideband gauge, coolant temperature gauge F*, & boost gauge.
gonna start doing a ton of work to it this week since i got fired from toyota, FML. I still am planning on making hyperfest...

[jdm2191]

Damn sucks about the job, but looks like u got everthing almost together

[David B S12]

Haha yea I know right, that's all I'm gratefull for.. Still doing sidework to try to get it actually finished & to the event, got a bunch of tires & shit ready

[S14Serge]

Dam this thing sounds so dope!!!

[David B S12]

im registered for XDC round 4!

gonna run power steering this time around! didnt have it on the s12, past 2 days such a hassle to get this all together ugh, luckily i kept my old tensioner pulley for this

napa belt part number

25 060730 73.5 inches 35$

bought a used pump from a friend, it was missing the pulley and the return line flange so i found those @ the junkyard and pieced it together
http://i1174.photobucket.com/albums/r613/dbellomojz/12e8dd74.jpg



also put together a bracket to bypass the A/C compressor, hopefully this 5$ setup works! seems nice and stiff, we will see.. shouldnt be a problem.. though this thing is probally only made for holding stuff up on a clothes line! l
http://i1174.photobucket.com/albums/r613/dbellomojz/ec0b513a.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/f08943be.jpg

ill brake clean it all down when im done,
i have a earls high pressure line with a AN fitting on the rack, went out to a shop and orderd a fitting that will connect the aftermarket line to my toyota power steering pump, so as of tomorrow ill have full power steering! so happy..

[jdm2191]

Pretty neat Idea with the A/C Delete bracket

I made mine out of 1/4in. steel

http://sphotos.xx.fbcdn.net/hphotos-ash3/576126_280572845363879_1089211611_n.jpg

[David B S12]

clean motor, some day ill have $ to put some money into the 1j, i thought about doing it in steel but i dont have many drill bits left haha

[jdm2191]

clean motor, some day ill have $ to put some money into the 1j, i thought about doing it in steel but i dont have many drill bits left haha
Thanks it's not immaculate, buts its alot cleaner then what it was....& Yeah I bought a a drill bit set just to do it. Im sure you'll bracket will do the job

[David B S12]

got some gloves, shoes, roll bar padding, a extinguisher mount, some high density padding & some cheaper stuff all @ OG racing
borrowed a in date seat and harness too! this is actually working out! no job - no problem!
looks like im gonna have everything i need to make tech


http://i1174.photobucket.com/albums/r613/dbellomojz/cfd38f82.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/dfee867e.jpg

[NismoTuner21]

If you're trying to drive SWD, your extinguisher needs to have a metal head!!

[David B S12]

If you're trying to drive SWD, your extinguisher needs to have a metal head!!

i hear ya, ill get one later! this isnt a SWD event though i should be fine

interior is done, just buttoning the car up for this weekend! gonna be at summit point from thursday to sunday, friday is qualifying, sat is the comp, sunday is drift nirvana practice!

http://i1174.photobucket.com/albums/r613/dbellomojz/4a06b580.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/83cbc64a.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/1f7d9619.jpg

awaiting some 35 mm spacers for my rear blue wheels

[David B S12]

http://i1174.photobucket.com/albums/r613/dbellomojz/190bb5a3.jpg


got all my tires mounted! got some sweet maxxis tires in the back if i make qualifying for the comp got 2 more and maybe others if i find them...

[josephin510]

Loved the S12, loving the build wants to make love with you??? Nice stuff man more vice more noise more smoke.

[David B S12]

yessir!


drilled some holes in the bumper
http://i1174.photobucket.com/albums/r613/dbellomojz/b290bd8e.jpg

got my rear spacers in
http://i1174.photobucket.com/albums/r613/dbellomojz/c0423995.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/329a5cb9.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/a11eb0f5.jpg

fitment is a okay for me, so pumped to rip this car up!

[David B S12]

some daylight pics before i get dropped off at summit tomorrow

http://i1174.photobucket.com/albums/r613/dbellomojz/79d170ed.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/47807e98.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/a070de37.jpg

[nissanguy11]

looks awesome man. I can't wait to start my 1J s14 build!

[David B S12]

hyperfest coverage

too bad i didnt qualify, turns out the BOV was leaking a tremendous amount of boost and i couldnt figure it out until sunday.
id hit about 7psi and then id just start losing all my boost/have no top end

got there thursday
http://sphotos.xx.fbcdn.net/hphotos-prn1/s720x720/522716_10150961532879556_295839699_n.jpg

friday morning getting ready for practice
http://sphotos.xx.fbcdn.net/hphotos-snc6/s720x720/181439_10150962230624556_1866813811_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-ash3/550479_10150962611874556_2139157630_n.jpg


some photos from friday practice/qualifying, it felt like it had around 200 hp at this point :/
no power no smoke! FAIL! ended up qualifying 22nd place! at least i didnt get a zero
http://www.wreckedmagazine.com/gallery/albums/xdc/xdchyperfestqualifying2012/normal_img_0706.jpg
http://www.wreckedmagazine.com/gallery/albums/xdc/xdchyperfestqualifying2012/normal_img_6165.jpg
http://www.wreckedmagazine.com/gallery/albums/xdc/xdchyperfestqualifying2012/normal_img_6168.jpg


blocked off that bitch (the BOV) @ drift nirvana around 1pm sunday through the day after checking for numerous boost leaks etc. and BAM like 70 HP and top end outta no where! shit hauls ass and spins through 3rd on 245's!
sad i didnt make top 16, but so glad i figured the car out! first time driving it.. now at least this winter i can really put some more effort in and prepare for a sick ass 2013 season. most deff will be doing some more testing as this season rolls through though.

http://sphotos.xx.fbcdn.net/hphotos-snc6/182182_211657872289466_82987930_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-ash4/479706_211939198928000_1435007658_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-prn1/s720x720/545002_462809937081670_1758338627_n.jpg

awaiting some more media and hopefullyl of a video of when i got it running better!

[David B S12]

David Bellomo at drift nirvana 2012 - YouTube (http://www.youtube.com/watch?feature=endscreen&NR=1&v=JOecn_fFtSQ)

[David B S12]

http://i1174.photobucket.com/albums/r613/dbellomojz/dcdf7843.jpg

[Mr.Clerc]

Looks amazing man! I was wondering where you got your mounts for the 1jz at? And if they make mounts for a 1jz into an s13 coupe, im trying to get my swap started and was just looking for advice. (Rocket bunny wing is pro too!!!)

[Touge180]

I think he got the ebay ones.Enjuku racing is now selling the ijz/2jz mounts cheaper than ebay.

[David B S12]

fresh footage from the event!
dope
David Bellomo - YouTube (http://www.youtube.com/watch?v=2FylyOx_5yI)

[PG BOOSTED]

very consistent runs dude. Nice

[jdm2191]

http://i1174.photobucket.com/albums/r613/dbellomojz/dcdf7843.jpg
Love this Pic!

[David B S12]

thanks :) gotta find a job, then ill dump so more money into it to finish out some practice this season/make it pretty for 2013

[David B S12]

time for a update

?v=1iIANK5Gg_8



was doing this
http://i1174.photobucket.com/albums/r613/dbellomojz/ddd.jpg

hit a wall
http://i1174.photobucket.com/albums/r613/dbellomojz/28e02f2f.jpg

bent this
http://i1174.photobucket.com/albums/r613/dbellomojz/e298932c.jpg

broke this
http://i1174.photobucket.com/albums/r613/dbellomojz/e5d3d6c5.jpg

bent these
http://i1174.photobucket.com/albums/r613/dbellomojz/3d34274d.jpg

banged this out
http://i1174.photobucket.com/albums/r613/dbellomojz/7a8162ab.jpg

ziptied/riveted it back together for now
http://i1174.photobucket.com/albums/r613/dbellomojz/6e2bf966.jpg

got this in the mail today
http://i1174.photobucket.com/albums/r613/dbellomojz/7402e2ee.jpg


changed my traction arm
http://i1174.photobucket.com/albums/r613/dbellomojz/50A6231E-C2B0-475D-9E6E-D4365A887FD3-21163-0000184536376F9D.jpg

still had some fucked up toe in, further diagnosing leads to a bent subframe

went and pulled it
http://i1174.photobucket.com/albums/r613/dbellomojz/F3371F10-0EA4-4E60-95A4-F312B101AEA9-21163-000018454A4E611F.jpg

like a boss
http://i1174.photobucket.com/albums/r613/dbellomojz/43FC906A-AD84-4A42-95E1-DB0DAE996551-21163-00001845562C0030.jpg

see the raised part in the center of the pic? its supposed to be flat.. going to pick up one in a few hours, and selling my battle version slip ons/getting sikky aluminum inserts for the new subframe
http://i1174.photobucket.com/albums/r613/dbellomojz/2533805B-542F-4576-BB96-AF5416E3F7A4-21163-000018455DBA359C.jpg




got a real toolbox! working at a different Toyota now.. lovin it
http://i1174.photobucket.com/albums/r613/dbellomojz/A207C008-7D2F-4B80-B831-100F3C9F75DB-21163-00001845B597DEAF.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/01D1B9C6-4B5A-4C97-8465-C3D680C3B9D5-21163-00001845C8387AFD.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/2D47718E-CD34-407E-921E-8593F6B3A269-21163-00001845E134C431.jpg
http://i1174.photobucket.com/albums/r613/dbellomojz/D30B7CD6-B72C-4A56-A33D-8F811BA4DB8B-21163-00001845D5E0D88F.jpg

My sr'ed DD has full adjustable suspension now and a 4 wheel alignment and is running great
http://i1174.photobucket.com/albums/r613/dbellomojz/7D64C2B4-151D-4F55-A380-A2B7BC49B44D-21163-000018456DAEAB4D.jpg

s14 staged
http://i1174.photobucket.com/albums/r613/dbellomojz/B97EDACD-A97E-4A0F-941E-CB371778FB6B-21163-00001845945F1938.jpg

[David B S12]

sweet, just ripped it out of a wrecked s14.. has a few hours & bushings already put into it
http://i1174.photobucket.com/albums/r613/dbellomojz/58CA4DC3-FD24-4564-9FBD-0F4768AF1B55-21609-0000189A6FA00D9A.jpg

[David B S12]

pulled this
http://i1174.photobucket.com/albums/r613/dbellomojz/D6FA6D73-044D-459B-ADF3-80D7F814D15A-22504-000019A1F3A5D269.jpg

cleaned this
http://i1174.photobucket.com/albums/r613/dbellomojz/319DF1C3-73BA-44C4-8D3E-427DB5A12C75-22504-000019A22C9920F5.jpg

painted it, cleaned everything, assembled
http://i1174.photobucket.com/albums/r613/dbellomojz/8AA54A0F-D91D-47B3-A708-7789B0DB5EF1-22504-000019A2496D4580.jpg

[David B S12]

tada
http://i1174.photobucket.com/albums/r613/dbellomojz/54CA1234-9D8B-4673-8077-97A6514E32D6-23232-00001AC03564AD64.jpg

[PG BOOSTED]

Nice and easy lol. Looking good David.

[David B S12]

The subframe was actually a pain in the ass to get in.. I'm guessing a stud bent a bit. Also had to cut off and air hammer the old bushings from the front studs due to being
Seized. Spent awhile just trying to bang/air hammer it up onto the studs so I could thread the nuts on... I still have crazy toe in!! Turns out the LCA on the RR is bent.. But my subframe was possibly bent in a previous wreck or from this one too. Either way I unseized and relubed everything.. And also having solid bushings is better then that slip on crap/spacers.. Those actually got messed up from hitting the wall anyways... WTB S14 RR LCA!!!

All my arms are battle version with stance coils, MA knuckles, Sikky extended swaybar, If anyone was wondering