PeaceOnesxWai
04-07-2012, 06:28 PM
Need money for more parts!
Text - 626-274-4414
Meet ups in 626 area, hit me up to arrange.
FT (List below)
APEXI Power FC L-Jetro w/ Hand Commander for S13 SR - $OLD
Used and was tuned for GT28/620cc injector
(Not sure on the details as this is not tuned for my motor)
Will also throw in a Z32 MAF
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0082.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0087.jpg
Project Kics R40 Racing Composite Lug Nuts in Gunmetal - $200OBO
Basically New, hand screwed 5 nuts for test fit.
size 12x1.25
22mm Wide/44mm Long/Open End
x16 lug nut with x4 lock nuts
Use to project your baller rims from being stolen!
http://i3.photobucket.com/albums/y55/aznnoodleboi51/Picture005.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/Picture006-1.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/Picture007.jpg
Volks RE30 / 19" Staggered / Formula Silver
Specs:
19x10 +22 Offset Front ( 1 Wheel only, Driver side )
w/ Tires - 245/35 19 93W (Minor stretch)
19x11 +25 Offset Rear ( One side is polished )
w/ Tire - 275/35 19 100W
Perfect fit for 350Zs and G35s
NOTE : THIS IS FOR ( 3 ) WHEELS ONLY!
Came from a Track 350Z. The car got into an accident and the one wheel ( Front Passenger ) was beyond repaired, it was scrapped. The other wheels are okay, i brought one of the rears to a shop to check for bends/flaws but everything checked out fine. The one rear is freshly polished and balanced, the other 2 have yet to be bought in for polishing (Can be done for extra $140)
Asking $1400 OBO
Retail for these is $3200+ for rims ONLY. 19" w/custom Stagger
Pay less then half! For 3.. with tires! source the 4th and youll come out under paying for a full set.
PM/Text - 626-274-4414
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0137.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0139.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0148.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0151.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0150.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0154.jpg
x4 - S13 SE Steelie Rims - $100OBO
Rims with no Tires 4 lug steelies.
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0120.jpg
FRP Universal Splitter - $100OBO
Never used, from duraflex. No cracks, lightweight. 65" x 18"
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0114.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0117.jpg
Craftsman 33gal 6HP Compressor - $OLD
15 CFM @ 40PSI
11.5 CFM @ 90PSI (BIG CFM! Allows full use a HVLP Gun)
I have another compressor and this one is just in the way. Its good to paint your entire car and more in one full tank.
I have a receipt on it from Sears proving it is in working condition. I bought it, thought it didnt work, brought it to sears
for repair and everything checked out ok.
It uses 240v so you need a power converter ( you can get if for $30 at an appliance store)
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0070.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0072.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0076.jpg
Nikon D5000 - $OLD
12.3 MP SLR Camera. Entry level SLR
Easy to use, wide range of aperture/shutter and video enabled.
Great color on skin tones, excellent for lifestyle shooting.
Comes with Charger, 18-55mm lens, extended battery grip, cables, original box.
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0083.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0085.jpg
Sample shot
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_9869.jpg
T25 Turbo w/ Manifold & Oil/water lines - $100OBO
Aftermarket T25 Turbo, minor shaftplay
Stainless oil/water lines
Stock SR manifold
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0091.jpg
S13 Hatch Back seats - FREEOBO
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0103.jpg
Trades and only these trades, looking for show quality parts.
ATI Super Damper for SR20 w/ all accessories (Power and AC)
S13 SR20 intake & exhaust Cam Gears
Tomei Solid Lifters (or if you have a built head im interested)
Apexi Power FC D-Jetro
LS Coilpacks
300ZX Manual Transmission
Z32 Tranny to SR20 Adapter kit
CLUTCH - STRONG SR20 Clutch! For 4-500lb of Torque
300ZX 30mm Aluminum Front Calipers
Apexi AVC-R Black / HKS EVS 6
S13.4 Hybrid Valve cover / S14 Valve cover (CLEAN with no OIL Only)
S13/S14 AC components from Engine bay to firewall (Dont need things under dash)
SR20 AC Bracket from Black Top S13 or S14 SR
SR20 Stance water neck adapter or something similar, no inline (unless you have it for -16AN line)
SR20 Oil Filter Relocation PLATES (Dont need your lines)
+ Looking for ANY Earl/BMRS/Goodridge/XRP/Aeroequip/Chase Bays Lines that replaces any barb lines in the engine bay, ESPECIALLY WATER LINES UNDER SR20 Intake Manifold. PS hose, Clutch line, in bay brake lines. I have AN fuel lines already
RIMS
Preferred 18"s 15+ to -10 Offsets for S13
No lame honda +++ Offsets, step lips or concaved.
Very interested in -
Work Meister S1 3PC DEEEP (I will add money on top)
S1 2PC, S1R 2PC , SSR Professor SP1, CR Kai, TE37, RPF1, WHITE Rims
Text - 626-274-4414
Meet ups in 626 area, hit me up to arrange.
FT (List below)
APEXI Power FC L-Jetro w/ Hand Commander for S13 SR - $OLD
Used and was tuned for GT28/620cc injector
(Not sure on the details as this is not tuned for my motor)
Will also throw in a Z32 MAF
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0082.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0087.jpg
Project Kics R40 Racing Composite Lug Nuts in Gunmetal - $200OBO
Basically New, hand screwed 5 nuts for test fit.
size 12x1.25
22mm Wide/44mm Long/Open End
x16 lug nut with x4 lock nuts
Use to project your baller rims from being stolen!
http://i3.photobucket.com/albums/y55/aznnoodleboi51/Picture005.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/Picture006-1.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/Picture007.jpg
Volks RE30 / 19" Staggered / Formula Silver
Specs:
19x10 +22 Offset Front ( 1 Wheel only, Driver side )
w/ Tires - 245/35 19 93W (Minor stretch)
19x11 +25 Offset Rear ( One side is polished )
w/ Tire - 275/35 19 100W
Perfect fit for 350Zs and G35s
NOTE : THIS IS FOR ( 3 ) WHEELS ONLY!
Came from a Track 350Z. The car got into an accident and the one wheel ( Front Passenger ) was beyond repaired, it was scrapped. The other wheels are okay, i brought one of the rears to a shop to check for bends/flaws but everything checked out fine. The one rear is freshly polished and balanced, the other 2 have yet to be bought in for polishing (Can be done for extra $140)
Asking $1400 OBO
Retail for these is $3200+ for rims ONLY. 19" w/custom Stagger
Pay less then half! For 3.. with tires! source the 4th and youll come out under paying for a full set.
PM/Text - 626-274-4414
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0137.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0139.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0148.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0151.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0150.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0154.jpg
x4 - S13 SE Steelie Rims - $100OBO
Rims with no Tires 4 lug steelies.
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0120.jpg
FRP Universal Splitter - $100OBO
Never used, from duraflex. No cracks, lightweight. 65" x 18"
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0114.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0117.jpg
Craftsman 33gal 6HP Compressor - $OLD
15 CFM @ 40PSI
11.5 CFM @ 90PSI (BIG CFM! Allows full use a HVLP Gun)
I have another compressor and this one is just in the way. Its good to paint your entire car and more in one full tank.
I have a receipt on it from Sears proving it is in working condition. I bought it, thought it didnt work, brought it to sears
for repair and everything checked out ok.
It uses 240v so you need a power converter ( you can get if for $30 at an appliance store)
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0070.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0072.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0076.jpg
Nikon D5000 - $OLD
12.3 MP SLR Camera. Entry level SLR
Easy to use, wide range of aperture/shutter and video enabled.
Great color on skin tones, excellent for lifestyle shooting.
Comes with Charger, 18-55mm lens, extended battery grip, cables, original box.
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0083.jpg
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0085.jpg
Sample shot
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_9869.jpg
T25 Turbo w/ Manifold & Oil/water lines - $100OBO
Aftermarket T25 Turbo, minor shaftplay
Stainless oil/water lines
Stock SR manifold
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0091.jpg
S13 Hatch Back seats - FREEOBO
http://i3.photobucket.com/albums/y55/aznnoodleboi51/IMG_0103.jpg
Trades and only these trades, looking for show quality parts.
ATI Super Damper for SR20 w/ all accessories (Power and AC)
S13 SR20 intake & exhaust Cam Gears
Tomei Solid Lifters (or if you have a built head im interested)
Apexi Power FC D-Jetro
LS Coilpacks
300ZX Manual Transmission
Z32 Tranny to SR20 Adapter kit
CLUTCH - STRONG SR20 Clutch! For 4-500lb of Torque
300ZX 30mm Aluminum Front Calipers
Apexi AVC-R Black / HKS EVS 6
S13.4 Hybrid Valve cover / S14 Valve cover (CLEAN with no OIL Only)
S13/S14 AC components from Engine bay to firewall (Dont need things under dash)
SR20 AC Bracket from Black Top S13 or S14 SR
SR20 Stance water neck adapter or something similar, no inline (unless you have it for -16AN line)
SR20 Oil Filter Relocation PLATES (Dont need your lines)
+ Looking for ANY Earl/BMRS/Goodridge/XRP/Aeroequip/Chase Bays Lines that replaces any barb lines in the engine bay, ESPECIALLY WATER LINES UNDER SR20 Intake Manifold. PS hose, Clutch line, in bay brake lines. I have AN fuel lines already
RIMS
Preferred 18"s 15+ to -10 Offsets for S13
No lame honda +++ Offsets, step lips or concaved.
Very interested in -
Work Meister S1 3PC DEEEP (I will add money on top)
S1 2PC, S1R 2PC , SSR Professor SP1, CR Kai, TE37, RPF1, WHITE Rims