gordonliu
04-03-2012, 09:04 PM
SOLD
Greddy Profec B spec II (black)
included are the following components:
control unit
boost solenoid with brass connectors already installed
main wiring harness (connects solenoid to controller)
power harness (powers controller, uses any 12v)
small length of vacuum line
in-line filter
SOLD
I live in Santa Barbara, CA.
This is not OBO. I have done my research and these things routinely sell for $200-$260 used on ebay, with the exact same collection of parts
This is all of the important stuff that comes with the device from the factory.
The only things that came included with the kit that is not included here are the following:
a several foot long rubber vacuum line
a Y/3-way/T-intersection that allows you to tap into an existing manifold vacuum source (instructions suggest tapping the FPR vacuum)
warranty information
user manual
The user manual is available from the technical support page on the Greddy website (in english).
The T-fitting can be purchased at home depot, Lowes, OSH, etc. for $1-$2.
bulk rubber vacuum lines can similarly be purchased at any hardware or automotive store in as short or as long a length as you need. Its just a vacuum line, not a fuel line.
This is a used item so there are some tiny scratches. Its also kinda dusty in the picture as I just took it out of storage to take the pictures
It was used for about 1 year on an SR20DET in an s13 chassis. Never had any trouble with it and it worked great.
Note that the paint on the solenoid has bubbled slightly due to heat from the hot pipe.
Reason for selling: shitty economy, no job, and a storage container full of parts.
https://lh3.googleusercontent.com/-9thVq8Iu8TQ/T3u3dJfTGCI/AAAAAAAAALc/Wtb3PxXWWQI/s720/WP_001269.jpg
https://lh4.googleusercontent.com/-Wz5A3IvZJIA/T3u3dksC-TI/AAAAAAAAALY/R7ljWjWuK_w/s720/WP_001272.jpg
https://lh3.googleusercontent.com/-Yuv-x_d9IRA/T3u3fuDxozI/AAAAAAAAALw/kYIvJDNFIc8/s720/WP_001274.jpg
https://lh3.googleusercontent.com/-K3ZWuk0O6y4/T3u3gL_LxkI/AAAAAAAAAN8/bljasVtcjnE/s720/WP_001276.jpg
Greddy Profec B spec II (black)
included are the following components:
control unit
boost solenoid with brass connectors already installed
main wiring harness (connects solenoid to controller)
power harness (powers controller, uses any 12v)
small length of vacuum line
in-line filter
SOLD
I live in Santa Barbara, CA.
This is not OBO. I have done my research and these things routinely sell for $200-$260 used on ebay, with the exact same collection of parts
This is all of the important stuff that comes with the device from the factory.
The only things that came included with the kit that is not included here are the following:
a several foot long rubber vacuum line
a Y/3-way/T-intersection that allows you to tap into an existing manifold vacuum source (instructions suggest tapping the FPR vacuum)
warranty information
user manual
The user manual is available from the technical support page on the Greddy website (in english).
The T-fitting can be purchased at home depot, Lowes, OSH, etc. for $1-$2.
bulk rubber vacuum lines can similarly be purchased at any hardware or automotive store in as short or as long a length as you need. Its just a vacuum line, not a fuel line.
This is a used item so there are some tiny scratches. Its also kinda dusty in the picture as I just took it out of storage to take the pictures
It was used for about 1 year on an SR20DET in an s13 chassis. Never had any trouble with it and it worked great.
Note that the paint on the solenoid has bubbled slightly due to heat from the hot pipe.
Reason for selling: shitty economy, no job, and a storage container full of parts.
https://lh3.googleusercontent.com/-9thVq8Iu8TQ/T3u3dJfTGCI/AAAAAAAAALc/Wtb3PxXWWQI/s720/WP_001269.jpg
https://lh4.googleusercontent.com/-Wz5A3IvZJIA/T3u3dksC-TI/AAAAAAAAALY/R7ljWjWuK_w/s720/WP_001272.jpg
https://lh3.googleusercontent.com/-Yuv-x_d9IRA/T3u3fuDxozI/AAAAAAAAALw/kYIvJDNFIc8/s720/WP_001274.jpg
https://lh3.googleusercontent.com/-K3ZWuk0O6y4/T3u3gL_LxkI/AAAAAAAAAN8/bljasVtcjnE/s720/WP_001276.jpg