PDA

View Full Version : CA Complete Z32 Brake and 5 Lug Hub Swap


Evan(CA)
03-31-2012, 06:17 PM
F+R 26mm Aluminum Calipers+Rotors w/ all hardware,pads and dust shields
BMC
Ebrake Assemblies
2+2 Ebrake Lines
Front 5 Lug Hubs and Spindles
Rear 5 Lug Hubs and Suspension Knuckles
Brake Booster(Not pictured)


I drove this car maybe 10 miles with the trans slipping horribly so I didn't push it hard at all. 1990 NA 2+2 with 140k on the car and showed no signs of the rotors being warped or other brake issues. It did sit on jack stands in the weather for a few weeks so there is quite a bit of surface rust at the moment. The front pads have plenty of life but the rears are almost completely gone. My only concern on the functionality of anything would be the rear rotors from the pads being worn down so low. Any questions just ask I'm a very up front no BS guy.

300zx Parts For Sale pictures by EvanSila - Photobucket (http://s389.photobucket.com/albums/oo339/EvanSila/300zx%20Parts%20For%20Sale/)

I always find it very hard to price these things because they can vary so much. I usually let the demand dictate price so send me your offers and in a day or two they will go to the highest bidder. I do have a fairly decent idea of what everything goes for though so don't expect to steal them.

I live in Santa Barbara but will be in Chatsworth this Thursday April 5th.

sidewayzsilvia
03-31-2012, 07:59 PM
sent you a pm. Legit seller here guys

Evan(CA)
03-31-2012, 10:28 PM
I've added a few pics looking from behind at the spindles and suspension knuckles. I also realized I kind of screwed the pooch on one of the bushings. One rear bolt was seized and I hacked it off with a sawzall and wasn't careful of the bushing as I thought I had a spare upright I could bolt on in it's place. Turns out the spare I had is for the wrong side. I will include the extra spare upright and you can swap the bushings if you so desire or just sell it to recoup some funds for all brand new bushings. Chances are it wouldn't make a noticeable difference once installed but it's definitely worth mentioning. It's in the pics.

Evan(CA)
03-31-2012, 11:57 PM
Everything has sold except the front hubs and spindles.

Driftazncy
04-01-2012, 01:34 AM
150 for everything?