1989 built RB25 coupe partout! good shit.

[krusty240]

so I am parting out my project car out due to financial reasons i cannot finish it.
EDIT: Motor is now being parted out.

first up, Long block:
built S1 rb25det , 0 miles on engine,
Bottom End:
block bored .20 over, line honed and hot tanked.
crankshaft micropolished
eagle H-beam rods
Arias rb25 pistons and .20 over size ring set
Arp hardware.
new OEM oil pump

Cylinder Head:
Hot tanked, milled and pressure tested
3 angle valve job
port and polish
(oem valvetrain/cams)
ARP head studs
cometic head gasket kit
new oem timingbelt and oem waterpump
all new seals (cam, crank, valves, rear main)

the engine compression tests with 155-160psi across all six (cold,dry)
alot of money into this 1,800 OBO

isis intake manifold (with sensors, iacv, and fittings): sold.

modified ebay exhaust manifold (T4 flange fitted, 2 bolt 38mm WG flange) 100 OBO

New turbonetics T67 turbo: 650 OBO

oem fuel rail/injectors: sold.

RB25 S1 wiring harness wired for S13: sold.

stock S1 computer: 80 OBO

Nismo twin disc competition clutch kit with flywheel: sold.

rb25 transmission (60k-ish): 700 OBO

RB25 power steering pump (good working condition): sold.

RB25 alternator (good conditon): sold.

S1 MAf: sold.

S1 coil packs: 80 OBO

syko rb25 swap mount kit with r33 sub frame. retails 550 new without sub frame, sold.

DSS aluminum driveshaft s13 to rb25 non abs retails for 450 new, turns out... its steel. (stuck a magnet to it) new price: 300 OBO

Real greddy rs bov, no fitting, sold.

ebay intercooler and krusty piping for rb25 with greddy intake and greddy bov. 100 obo

koyo aluminum radiator, a little beat up from fitting, no leaks and no over heating issues. Gone.

300zx brake set, full swap
font and rear calipers (aluminum i believe)
4/5 lug conversion rotors (will be freshly machined)
earls steel braided conversion lines
*you will need new pads and no e-brake :/
[B]sold.

sparco steering wheel: damaged suede on top (doesnt really bother) sold.

dmax knock off tail lights (great fitment) sold.

1 Nexen 255/35/ ZR18, 90% tread (8/32) 1 plug in it, great tire to burn: sold.

looking for local pick up on all parts but may ship some if buyer pays shipping, text me or pm me. 661 878 4181

http://i181.photobucket.com/albums/x18/live2skate927/IMG_1567.jpg
http://i181.photobucket.com/albums/x18/live2skate927/IMG_1563.jpg
http://i181.photobucket.com/albums/x18/live2skate927/IMG_1560.jpg
http://i181.photobucket.com/albums/x18/live2skate927/IMG_1540.jpg
http://i181.photobucket.com/albums/x18/live2skate927/IMG_1323.png
http://i181.photobucket.com/albums/x18/live2skate927/IMG_1325.png
http://i181.photobucket.com/albums/x18/live2skate927/IMG_1319.png
http://i181.photobucket.com/albums/x18/live2skate927/IMG_1359.jpg
http://i181.photobucket.com/albums/x18/live2skate927/1-1.jpg
http://i181.photobucket.com/albums/x18/live2skate927/2-1.jpg
http://i181.photobucket.com/albums/x18/live2skate927/4-1.jpg
http://i181.photobucket.com/albums/x18/live2skate927/6-1.jpg
http://i181.photobucket.com/albums/x18/live2skate927/7-1.jpg
http://i181.photobucket.com/albums/x18/live2skate927/8-1.jpg
http://i181.photobucket.com/albums/x18/live2skate927/9-1.jpg

[elguapo260sx]

sexy car, fuck some finance. max out your credit and not pay them back. thats what i would do. banks cheat the world anyway, cheat them back.

im a man not a sheep, i dont want your ipad
free bump

[ariansworld]

Will you sell the whole rb26 valve covers set?

[ship2236]

Edddddddieeeeee! Price on the shell w/out motor n trans sir. Hmu

[Eramo323]

Pics of sparco wheel ?

[Eramo323]

Interested in the shell as well sir

[stilmissmysti]

How much do you want for the syko kit drive shaft and tails.

What kind of head gasket do you have is it installed or for sale seperate

I have my sub frame... is the r33 sub new or used

[charles13]

Prices!!!
Turbo?
Exh mani?
Intake mani?

I want the the taillights

[mcgyver77]

If you sold the manifolds I'd be interested in the long block how much?

[new dood s13]

id like the intercooler and piping shipping quote to 45249

[sleeper108]

Sending a PM!

[krusty240]

ariansworld: i could sell the valvecover set, there is a hole cut into the front cover to clear the vvt, i have the peice and it can be welded back together. make me an offer.
http://i181.photobucket.com/albums/x18/live2skate927/6.jpg

ship: ill text you bro!

ermano323: shells not for sale yet, and here is a pic of the wheel
http://i181.photobucket.com/albums/x18/live2skate927/2.jpg

stilmissmysti:ummm i can do 750 plus trade for your stock stuff, the subframe is used (car was running and driving before engine rebuild) enginge is assembled so cometic head gasket is now one with the engine.

charles13: if i do sell engine as a longblock um,
turbonetics t67: 700obo
t4 manifold: 200obo
isis intake mani: 200 obo
lmk man

mcguyver77: are looking for longblock meaning block/head, or engine/tranny/harness/ecu(no turbo, exhaust manifold, or intake)
lmk specifically what you want

new dood s13: kind of a big item to ship, ill try to see if i can get a quote.

ill tear the car apart this weekend and post up more pics! lmk guys!

[RBPOWERED240]

how much for the nismo clutch ?

[jdm2191]

Want Radiator PM me

[mcgyver77]

only the complete block and head with valve covers no tranny, intake or exhaust manifolds, turbo, wiring, fuel rail injectors dont need that stuff let me know how much

[krusty240]

If I find a buyer for the engine then everything else will be up for grabs

Rbpowered240: I'll pm you if I find buyer for engine k

Jdm2191: radiator is sold bro sorry

Mcgyver77: I'll pm you right now

[kaane21]

how much are you trying to get for the nismo clutch, and how are the clutch discs?

[drftx]

Hey would you sell the key cylinder and clip and key also that Silvia trunk badge Lmk

[Michaelwinne]

Do you have a series 1 MAF?

[Guitar Nut]

Is this Brandon's old car?

bump for another rb s13 in palmdale =)

[rb20dettt]

How much for the transmission also the clutch and oil pan il go pik up

[krusty240]

Kaane21: if nobody wants to buy the motor package then I will part, the clutch set is in good condition, when I pull the motor I'll measure the pads on the discs for you, but I had that clutch in my s14 and it was flawless! Grabs awesome!

Drftx: trying to keep a complete shell, so probably not but maybe later on

Michaelwinne: yeah man I have it, if I part motor set then you will have pm

Guitar nut: hell yeah man! This is the old poopcoupe, unfortunately she isn't as pretty as she used to be :/

If I don't have a buyer for motor set in a week or two I will part it out so be patient guys!

[P-Funk alot]

hey do you have the power steering pump.. if so how much pm me mine just seized

[krusty240]

p-funk alot: i do have a good one, so if motor package does not sell ill sell the pump

[davinci]

Have trunk trim pieces and trunk carpet?? Not the spare tire cardboard

[veeates36]

Hi, Got an all black hood for sale in good shape, non primer..?? If so, please email me [email protected]

[krusty240]

Davinci: sorry bro, the interior is gutted.

Veeates36:haha thanks man but I'm parting out, not piecing together lol glws though!

[roboticnissan]

Not a bad way ti spend 10000 dollars

[rb20dettt]

How much u want for the shelll lmk and transmission

[P-Funk alot]

well lemme know on that pump mine just seized and im not into straining myself lol lazy mofo right heere

[kaane21]

ok pm me if u do... i'm really interested

[Nesser]

How much for the rims?

[krusty240]

Nesser: sorry bro rims were sold a long time ago, they were cheap ass xxr 562 you can find em anywhere

[Michaelwinne]

Still holding onto that MAF? Lol

[krusty240]

Michaelwinne: up for sale! Haha lmk man

[Michaelwinne]

I need that bad! But I'm broke :/ hang onto it for me til next Thursday?

[krusty240]

Michaelwinne: hmu up when you have the cash, if I still have it... It's all yours!

[CleanAndLegit]

i want the tails i got stocks and that trunk lock too pm me pleaseQ

[vw203]

very interested in the sparco.

[rb20dettt]

Would u part the trany bellhousing if so how much

[misfitsil80]

how much for the full motor trans intercooler driveshaft ecu and wirirng i need a total price to see if i should pull out my wallet

[krusty240]

cleanandlegit: if the sale falls through on the tails, ill pm you!

vw203: shoot me a text, lots of interest but no one has shown me the cash yet!

rb20dettt: sorry not parting trans

misfitsil80: pm me or shoot me a text man, maybe we can work a deal out before i sell some of these peices.

[krusty240]

Bump!
Clutch sold.
Rb26 valve covers sold
Everything else still available

[CurleyMerkin14]

sent you a pm!

[shogo1]

PM sent! lmk!

[1luvsilvias]

Hey Krusty240 hmu. i sent you a pm.

[Michaelwinne]

Michaelwinne: hmu up when you have the cash, if I still have it... It's all yours!

Hey man still got that MAF? I'll pay you promptly in the AM if you got it.

[Michaelwinne]

Also may be interested in that driveshaft.

[blackmagic240]

Im in need of the alternator check your pm. thanks

[krusty240]

pm's replied.

PRICES DROPPED! NEED THIS STUFF GONE!!!!!!!
bump!

[xBtony]

EDDIE! Bump for you, and your legit parts.

[pdaledk]

Bump loved this car .. :D

[FreddysEvolutionIX]

Bump for you sir!

[krusty240]

Update: shell has been sold along with the z32 brakes, all i have left is the long block, transmission, exhaust mani, turbo, intercooler and driveshaft. i am willing to make a stupid good package deal for anyone who takes the rest of this stuff!!!