Cupholders!!!

[jrivera]

For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES.

http://zilvia.net/advertise.html

[blades13.5]

Pm sent. Very cool!

[jrivera]

PM Replied.

[blades13.5]

$$sent ... Thanks!

[jrivera]

$$sent ... Thanks!

Got it! Thanks!

[Nkelley]

does this get in the way when you actually have a drink in it?

[tre4s13]

does this get in the way when you actually have a drink in it?

^^ this.

Sent from my LG-P999 using Tapatalk

[Nissan206]

That's pretty bawler. Might pick up 2 of these when I get paid. Do they get in the way when your driving and they are in use?

[WERDdabuilder]

that means no cans cause slamming the door would make shit splash.

[jamg]

take a side view of how much the cup holder pokes out when in use.

i can see the base that will fit the bottom of cups and bottles, but some cups have a wide top and skinny bottom, like cups from your local gas station. if it isn't out far enough, the door panel will push up against it..

if it will fit those, that would be cool.

[jrivera]

Will it get in the way when driving? No. As far as the small bottoms large top drinks, my friend is going to take pics and video's of it installed on his car, with large drinks in it. I don't drink those fountain drinks much. When I get the pics, I will post them. He will be posting a review of the product as well.

Yeah, no slamming the door with open drinks. But usually, most people that drive around have their drinks in hand when they leave the car. A lot of cars have cup holders in their door as well. Same rule applies to them.

You can install the cup holders any where you would like. I put it on the door because it seemed to make the most sense.

Here's another place it can be installed (sorry for the dirty interior. it's a mock up car lol)
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/P3245813.jpg

[ray_dizzle33]

Pretty cool! Might be interested. Do you have a limited supply of these?

[jrivera]

Just let me know whenever you're ready. I am keeping a supply of them on hand. If I run out, there will be a few days delay in getting them out.

Either way, once you let me know you are sending payment, I will advise you of the expected shipment date.

Thanks!

[jrivera]

Ask and you shall receive. My buddy is taking pics of them on his car like I mentioned in an earlier post. But for those asking for bigger drinks, here is what I could find at 7-eleven.

http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/P3285858.jpg
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/P3285861.jpg
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/P3285863.jpg

My wife wanted her slurpee that's why it's partially empty lol
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/P3285866.jpg
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/P3285868.jpg

Hope this helps!

[emericanz]

this is gnarly

[2iv0 sx]

Darn.. Looks like that location will get in the way with the manual windows knob

Able to confirm?

[jrivera]

Darn.. Looks like that location will get in the way with the manual windows knob

Able to confirm?

It really depends on where you mount it. The cup holder I mounted could be mounted another inch lower and there is movement to the left and right of it. Mounted as low as possible, clearance shouldn't be a problem (obviously with the drink removed).

Can someone turn the manual window knob so that it is pointed straight down. Then measure the distance between the knob and the bottom of the door panel? I believe it's around 5 inches. The cup holder is only 4 inches tall.

Thanks!

[turbo_dreams]

So glad you're making this. Was on a hunt for this soon as I saw it,


http://ll.speedhunters.com/u/f/eagames/NFS/speedhunters.com/Images/Casey%202010/April%20011/Car%20Fe

I'll be ordering soon.

[lenox_240]

sent u an email.

[jamg]

more suggestions-

have the cup holder be adjustable in height and circumference.

i might have a wide cup so i can widen up the circle, or i might have a long top heavy cup so i will be able to adjust the height and make it longer. i dont want to take a turn and my 52oz drink just topple over from the weight of the liquids.

[jrivera]

Lenox, replied!

[lenox_240]

you got your $$ man. ill try to post some pics once i install them on my s14.

[jrivera]

more suggestions-

have the cup holder be adjustable in height and circumference.

i might have a wide cup so i can widen up the circle, or i might have a long top heavy cup so i will be able to adjust the height and make it longer. i dont want to take a turn and my 52oz drink just topple over from the weight of the liquids.

Jamg,

I hear what you're saying. Problem is that it's not financially practical to even try and make something like that. It would end up costing a lot more.

These cup holders are basically equivalent to cup holders that come in a standard car. If the cup fits in those, it will fit in these just fine.

[jrivera]

you got your $$ man. ill try to post some pics once i install them on my s14.

Got it! Thanks!

[zz_kouki_zz]

Darn remember this cup holder on my old toy 4x4. I can't find them anymore now it's finally here :) I'll w8 to see pix on S14's tho then will buy.

[jrivera]

Darn remember this cup holder on my old toy 4x4. I can't find them anymore now it's finally here :) I'll w8 to see pix on S14's tho then will buy.

Lenox_240 has a S14. So should be soon...:coold:

[lenox_240]

I'm thinking of a spot to mount the driver side one out of my way when I drive, I don't want to mount it on the door but ill find a spot.

[jrivera]

Yeah the S14 interior looks a lot more congested. Let us see pics when you figure out where.

Thanks!

[jrivera]

All orders have been shipped. Thanks everyone for your purchases. Still have more available!!!

[KiLLeR2001]

PM sent. :)

[jrivera]

PM sent. :)

Replied! Thanks!

[2slow2go]

what are they held on to with? double side tape?

[KiLLeR2001]

Payment sent! Thanks Josh.

For those of you with manual windows, the crank will get in the way if you have any type of cup in place. So I would only recommend it for people with power window door cards.

:)

[jrivera]

Payment sent! Thanks Josh.

Thank you!

[jrivera]

For those of you with manual windows, the crank will get in the way if you have any type of cup in place. So I would only recommend it for people with power window door cards.

Or remove the drink while you roll your window up or down. ;)

[jrivera]

Mod, please delete this post.

[jrivera]

Thanks everyone for the purchases. :rawk:

FYI - I have 2 sets left. I will re-supply shortly but it will take until the end of next week to have everything ready and shipped.

You guys are awesome!

[corry29]

Just sent payment!

[jrivera]

Just sent payment!

Got it! Thanks!

Changed to 2 sets left

[s13_rb25]

i was up at enjuku yesterday and saw this. Adam was trying to find a decent spot to mount it in his 14. seemed hard without it getting in the way. in a 13 though it fit great. cup holder also definitely looked very high quality. not something cheap and brittle. just a suggestion i thought would work... what if you made like an angled pad, to make it sit perfectly vertical on the passenger side of the dash on an s14.?

[jrivera]

i was up at enjuku yesterday and saw this. Adam was trying to find a decent spot to mount it in his 14. seemed hard without it getting in the way. in a 13 though it fit great. cup holder also definitely looked very high quality. not something cheap and brittle. just a suggestion i thought would work... what if you made like an angled pad, to make it sit perfectly vertical on the passenger side of the dash on an s14.?

Yeah I like that area too...

[jrivera]

Mod, please delete this post.

[leung]

Sent payment for a set! :)

[jrivera]

Sent payment for a set! :)

Thanks! It was shipped this morning! I emailed you the tracking info.

[jrivera]

Hey everyone,

There are 2 more left before I run out. Next batch will be ready in about 2 weeks.

I have left feedback on all buyers. Thank you guys. When you guys receive your product, please post pics of them installed. Feedback would be greatly appreciated.

Thanks again!

[hendershot]

im really considering getting at least one of these. bump for a fellow floridian at the least

[jrivera]

im really considering getting at least one of these. bump for a fellow floridian at the least

Thanks dude. I'm actually like 40 miles south of you...

[hendershot]

so instead of sending payments (not very familiar with paypal) if i decide i want one could i just meet up with u with cash and buy it from u in person? one of my friends might want one too

[jrivera]

so instead of sending payments (not very familiar with paypal) if i decide i want one could i just meet up with u with cash and buy it from u in person? one of my friends might want one too

Hendershot, PM sent

[DrtyRat]

Good to see you still doing some inovative things for the 240sx world. I remember you getting frustrated with ppl on sfl240sx bc no one wanted to pay for quality work. I also saw all of the trolls on sfldrifters when you posted them there. Good luck!

[alcorp]

Where did you get this!!!?!?!?!!

[jrivera]

Good to see you still doing some inovative things for the 240sx world. I remember you getting frustrated with ppl on sfl240sx bc no one wanted to pay for quality work. I also saw all of the trolls on sfldrifters when you posted them there. Good luck!

Hey man, it has been a long time. Thanks for the compliment!

What a difference in response on this forum vs. drifters... That forum reminded me quickly why I decided to get out. :bash:

[jrivera]

Where did you get this!!!?!?!?!!

What do you mean?

I know where you could get it though lol :p

[bookoo]

I'll take a set, pming you now so I can send money!!!

[jrivera]

I'll take a set, pming you now so I can send money!!!

Payment received.

Thanks!

Josh R

[Scionide]

And the last pair goes to me, thanks again for a smooth transaction, I can wait to get them put in!

[jrivera]

Thanks everyone for your purchases. I have left feedback on every buyer. You guys were all great to deal with.

I will have more cup holders ready in about a 1.5-2 weeks.

You can still purchase them but will have to wait. They will be shipped in the order they were purchased.

Again, thanks everyone for the support!

[n8RPS13]

These will come in handy on my long drive back to New Smyrna Beach/Orlando from San Diego in July! Cant wait to be back in the REAL Sunshine state!

[OuTLaVvZ]

looks cool . i want to see pics on s14

[SaVAgES14]

Are you gonna post when you have more?

[jrivera]

These will come in handy on my long drive back to New Smyrna Beach/Orlando from San Diego in July! Cant wait to be back in the REAL Sunshine state!

Funny because I can't wait to leave the Sunshine State! Moving to SC soon...

Are you gonna post when you have more?

Of course! I would encourage everyone to pre-order them though. That will guarantee you holders since they are first come first serve. Either way, I will keep everyone informed.

[lenox_240]

Thx Josh i just got these today, but it looks like i'ma going to have to fabricate something for the S14, there isn't a good spot in the interior to mount these. Hopefully by friday ill have some pics.

[jrivera]

Thx Josh i just got these today, but it looks like i'ma going to have to fabricate something for the S14, there isn't a good spot in the interior to mount these. Hopefully by friday ill have some pics.

Hey Edgar,

I had never tried them myself on an S14 which is why I posted them for the S13 which I did try.

Let me know if there is anything I can do to help out.

PM sent.

[jrivera]

Everyone, I spoke to my supplier. I am having part of the order rushed. I was promised enough to make 10 cup holders or 5 sets. I will ship those out on Thursday or Friday. The rest will come next week.

So, order away everyone!

[leung]

Just wanted to share some pics of the product and them installed.

Everything that you get: which includes the sellers own personal instructions (jrivera you sure know how to do business sir), the receipt, screws for mounting you probably wont use, the cupholders themselves, and the adhesive already mounted onto them.

http://i92.photobucket.com/albums/l17/driftinspeed/photo-17.jpg

http://i92.photobucket.com/albums/l17/driftinspeed/photo3-2.jpg

Pic to show clearance with my bride seat

http://i92.photobucket.com/albums/l17/driftinspeed/photo1-5.jpg

Mounted :)

http://i92.photobucket.com/albums/l17/driftinspeed/photo2-3.jpg

Quality product from a quality seller.

[jrivera]

For those of you with S14's, between lenox_240 and I, we will make a bracket that works. If you have already purchased a cup holder and have an S14, I will go ahead and send you the bracket once it's complete. This will be at no cost to you. Please notify me if you have already purchased one and have an S14.

For those of you in the future that are interested in cup holders for the S14, unfortunately the price will be a little higher due to the extra cost of the bracket(s). I will keep you posted.

Thanks,

Josh

[jrivera]

Did anyone else mount theirs?

[garetth]

Sent you a pm

[Vitzio240sx]

where in fl are you located? i want to pick one of these

[jrivera]

where in fl are you located? i want to pick one of these

Lake Park/North Palm Beach

[jrivera]

Since I have received several PM's with this question, I'll go ahead and post it here. Anyone who orders the cup holder(s) will have their order shipped on Friday (assuming they are ordered by Thursday). If they are ordered on Friday, they won't go out until Saturday or Monday.

Thanks as always.

For those who have an S14, I should have a bracket on Friday and will send it to lenox_240 to test it out.

[JZenki]

I want some! Whens the new shipment coming in?

[jrivera]

I want some! Whens the new shipment coming in?

Orders will be mailed out on Friday.

[Scionide]

Got mine in today, my initial impression was that of very high quality. The instructions were very good and clear. My initial concern was that the adhesive wouldnt hold, but as per the instructions I let it sit for an hour and went out and got some Sonic tonight and they work fantastic, the location is perfect, I couldnt be happier thanks again man!
http://i141.photobucket.com/albums/r76/RedzIonGuy/Cup1.jpg
http://i141.photobucket.com/albums/r76/RedzIonGuy/cup2.jpg

[jrivera]

I'm glad you are happy! I promise you the adhesive will hold. Looks can be deceiving. 3" of that stuff holds 5.5 lbs. There is approximately 8.75" worth of adhesive on each cup holder. It will hold!

[ETHANOLED SR]

Nice product, I'll have to order one soon but I gotta ask... Will it come in kevlar?
lol. :rimshot:

[hollerjeet]

anyone install in a s14? pics

[lenox_240]

anyone install in a s14? pics

me and jrivera are working on something for the s14's so far we don't have a finish product yet and we wanna make sure its something reliable and not as expensive that way everyone could afford it.

[jrivera]

Nice product, I'll have to order one soon but I gotta ask... Will it come in kevlar?
lol. :rimshot:

I wish lol

anyone install in a s14? pics

me and jrivera are working on something for the s14's so far we don't have a finish product yet and we wanna make sure its something reliable and not as expensive that way everyone could afford it.

Yes. Thanks lenox_240 for helping out on this. Making a bracket is easy. Making one that is cost effective... not so much. But very soon. We have several works in progress. We will keep you updated.

Out of curiosity, those of you with S14's, are you more likely to buy 1 or 2 cup holders?

[jrivera]

Alright everyone. All orders will ship out tomorrow night! Order away!

[KiLLeR2001]

USPS has now become my arch enemy!!! grrrrrrrrr. I got Chik-fil-a today and damn near spilled my root beer everywhere with their stupid cardboard cupholder lol... I CAN'T WAIT TO GET MINE!

[jrivera]

USPS has now become my arch enemy!!! grrrrrrrrr. I got Chik-fil-a today and damn near spilled my root beer everywhere with their stupid cardboard cupholder lol... I CAN'T WAIT TO GET MINE!

Yours will go out UPS since you have been so patient. But I won't make it to the UPS store tomorrow. Will be Saturday morning.

Just so everyone understands what is going on here. USPS has totally screwed up this shipment. He is the closest buyer to my location and USPS keeps sending the package to his area, then my area, and so forth. It has made 2 trips to him and 3 back to me.

[KiLLeR2001]

Thanks Josh.

Awesome customer service and fast communication. Even if you don't need a cupholder you should buy one anyways!

[lenox_240]

Thanks Josh.

Awesome customer service and fast communication. Even if you don't need a cupholder you should buy one anyways!

since i haven't install mines i have 1 of them near my computer holding them drinks while i'm on the net or play my video games ha :D

[bookoo]

Installed mine last night but haven't driven the car since, I will post pics soon.



I gotta commend josh on communication and speediness. Well played sir.

[jrivera]

Thanks guys! Much appreciated! For those who haven't, please leave feedback (trader rating). I would greatly appreciate it, as would future buyers.

Thanks!

[Pcharliep04]

I want one !!!!!!! 77546 pm me
Asap

[Tommy]

How would the adhesive hold up to high heat? Live in AZ so summer time would be brutal and wouldn't want it falling off with a drink on there haha

[jrivera]

I want one !!!!!!! 77546 pm me
Asap

PM sent.

How would the adhesive hold up to high heat? Live in AZ so summer time would be brutal and wouldn't want it falling off with a drink on there haha

I doubt your interior gets over 250 degrees, even in summer. It'll hold. That's why I'm only using the highest temp adhesive I could find.

[Pinggg]

I'm probally gonna scoop these up in about a week or two. I'm in Fl as well. Please don't stop making them!

Bump for cup holders!

[jrivera]

Those that have ordered recently, your orders have been shipped.

On a very positive note everyone, all my supplies came in today. So... I have 9 sets available.

Let me know. And I appreciate everyone's positive remarks. I am a firm believer in good service. I believe it is as important as a good product. Thanks again!

[KiLLeR2001]

Finally, after waiting about 7 days for the cupholder to travel 2 hours away (thanks to USPS).

http://tehl33tsite.com/240sxdd/black240/restoration/interior/cupholder/IMAG0404.jpg

http://tehl33tsite.com/240sxdd/black240/restoration/interior/cupholder/IMAG0407.jpg

Don't mind the nasty speaker housing. I have a mint condition one waiting to be installed whenever I'm not lazy.

http://tehl33tsite.com/240sxdd/black240/restoration/interior/cupholder/IMAG0408.jpg

http://tehl33tsite.com/240sxdd/black240/restoration/interior/cupholder/IMAG0410.jpg

http://tehl33tsite.com/240sxdd/black240/restoration/interior/cupholder/IMAG0412.jpg

And the test! Baha Blast Mountain Dew. Holds like a champion.

Big thanks to Josh again for making this process painless as possible. He was ready to ship me another cupholder via UPS but then USPS got their act together at the last second haha.

[corry29]

Did anyone else mount theirs?

Thanks jrivera! Life-saver and definitely genius!

http://i145.photobucket.com/albums/r204/cwang29/IMG_0222.jpg

[jrivera]

Thanks for the pics and positive posts guys. Everyone else, please post pics when you can.

Have 9 sets! $25 shipped for 1, $45 shipped for 2 anywhere in the states. I will ship international, buyer pays the difference in shipping.

[Tommy]

I'm down for one shipped to 85363

[jrivera]

I'm down for one shipped to 85363

My paypal is [email protected] In the notes section, please put this forum name and your user name.

Thanks!

Josh

[jrivera]

What are they held a with? Double-sided tape?

They are held on with industrial adhesive. It's the cup holder, adhesive, insulation, and then the adhesive (which is industrial grade mounting tape) to attach it to the door.

[Tommy]

My paypal is [email protected] In the notes section, please put this forum name and your user name.

Thanks!

Josh

Payment sent!

[jrivera]

Payment sent!

Payment received. Cup holder shipped! Thanks!

[jrivera]

For those who have received the cup holders, if there is anything you feel I can do to improve them or just improve the whole buying experience, please let me know. Also, if you ever have any issues with them (don't think you will but just saying), please let me know.

Josh R

[jrivera]

Mod, please delete this post.

[jrivera]

Any more installed pics? Still have sets available.

[hollerjeet]

For all you S14's, to show you some progress on the brackets. This is a mock up so please don't nitpick. Please ignore the raised insulation. It's my mock up cup holder. It is made from stainless steel. I have another design in mind as well. Either way, they will be tested prior to being sold.

http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/IMG01090-20120408-2058.jpg
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/IMG01088-20120408-2056.jpg
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/IMG01089-20120408-2057.jpg
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/IMG01093-20120408-2101.jpg


cant wait till these s14 ones are done!!!!!

[Pcharliep04]

5 stars !!!!!!!!!!! for seller, I received yesterdays and my s14 kouki has new cups holder.
Every 240 should have

[jrivera]

cant wait till these s14 ones are done!!!!!

Sorry for the delay. I am testing out several bracket designs to ensure they work correctly and are cost effective.

5 stars !!!!!!!!!!! for seller, I received yesterdays and my s14 kouki has new cups holder.
Every 240 should have

Thanks! Do you have an installed pic? Can you leave a trader review when you have a few? I would greatly appreciate it!

[jrivera]

Also, I have no problem shipping international.

If you live in Canada, the price shipped is as follows:

1 cup holder is $33 shipped. 2 cup holders are $53 shipped. That is in USD. Thanks!

[Grimmiee]

I need these so bad!!!! do you still have them in stock?? also can you ship to 60148??

[jrivera]

I need these so bad!!!! do you still have them in stock?? also can you ship to 60148??

I do. I can ship anywhere! One or two?

[jrivera]

I have 10 sets ready to go! Order away!

[OuTLaVvZ]

woo cant wait for s14s!

[Pcharliep04]

http://i1215.photobucket.com/albums/cc508/pcharliep04/e0289728.jpg
I didn't do anything special on top of speaker cover lol !!!!!!

[jrivera]

http://i1215.photobucket.com/albums/cc508/pcharliep04/e0289728.jpg
I didn't do anything special on top of speaker cover lol !!!!!!

Did you use another adhesive? That doesn't look like the one I use.

[Drifter.X]

Also, I have no problem shipping international.

If you live in Canada, the price shipped is as follows:

1 cup holder is $33 shipped. 2 cup holders are $53 shipped. That is in USD. Thanks!

Is that with or without the PayPal fee?

[jrivera]

Is that with or without the PayPal fee?

Includes paypal fee.

[Pcharliep04]

Yes m3 weather but I have s14 and only place were it didn't bother me was speaker cover : ) i am satisfy

[jrivera]

Mod, please delete this post.

[jrivera]

All orders have shipped. Brackets will be ready by Friday. Those who have S14's and ordered before brackets were made will receive them at no cost.

Still have more available!

Thanks everyone!

[rainvelazquez]

I saw this thread n today I went to the junk yard n found this :)
http://i1142.photobucket.com/albums/n619/jayuchiha21/IMAG0466.jpg

IMA try to see how I can work it in maybe modify it on ash tray It's about the same size but slightly bigger or maybe on ARM rest

[jrivera]

I think it's a matter of preference. I never liked having my drinks in the ash tray/arm rest spot because it was in the way of shifting.

[martinez661]

how about just add one on top of the stereo?
http://img2.claspics.com/27zuy2vk/h15orx31/1334711558-332.JPG_m.jpg?1334721869http://img2.claspics.com/27zuy2vk/h15orx31/1334711564-959.JPG_m.jpg?1334721875

[jrivera]

Those are options other people on here can look into which have been out for a while. I am only offering them something different. Those who are interested or those who have purchased the cup holders are looking for something different.

I personally do not like the cup holders in the center console or blocking my stereo/AC controller and dripping moisture all over the place.

Keep in mind guys, this is a for sale thread. Thanks!

[jrivera]

Mod, please delete this post.

[jrivera]

Mod, please delete this post.

[jrivera]

Great news! I have 20 brackets available! I will take pics later tonight!

Those who order cup holders before. Your brackets will be mailed tomorrow. Those who order the new package prices, your orders will be mailed out tomorrow as well.

[jrivera]

Mod, please delete this post.

[jrivera]

So, I have 16 cup holders left and 20 brackets. Order away!

[jrivera]

If you ordered cup holders previously and have a S14, please send me a PM so I can send you a bracket.

Thanks!

[Tommy]

Just put mine on this weekend. Pics for s13 with manual doors.

http://i1059.photobucket.com/albums/t434/S13_Tommy/IMAG0133.jpg

http://i1059.photobucket.com/albums/t434/S13_Tommy/IMAG0134.jpg

http://i1059.photobucket.com/albums/t434/S13_Tommy/IMAG0135.jpg

[jrivera]

Tommy, thanks for the pics!

[jrivera]

Alright everyone, slight delay.

With the cup holders with brackets, I ordered an even stronger adhesive. The current adhesive works great for the cup holders but isn't holding so well with the bracket.

I am not satisfied with it and thus ordered a much stronger adhesive. Unfortunately, that adhesive will not arrive until next week.

I apologize for the delay. I stand behind my work 100% and will not compromise strength and integrity. I will keep you updated.

So, the S13 cup holders are still for sale. The S14's are on hold.

Thanks again and I appreciate your patience!

[jrivera]

Hey everyone! I have 12 cup holders left for the S13. Order away! All orders will be shipped tomorrow if ordered today.

[jrivera]

So, good news. The adhesive will be here next week. It's even stronger than the current adhesive being used for the S13 (which is very strong and works well for the S13). The reason I needed a stronger adhesive is there is less area with the bracket that then cup holders that don't need it.

The adhesive that arrives next week is extremely strong. It holds 73 lbs per square inch. I almost fell out of my chair when they told me that. Guess how many square inches of adhesive will be on the S14 bracket? 3 inches squared. That's over 219 lbs of mounting strength. Insane!

[jrivera]

Mod, please delete this post.

[KoukiTony]

Just sent you money for 2 s14 cupholders for the pre-order special.

Thanks

[KoukiTony]

Also, where would you recommend for the best mounting location in an s14?

[jrivera]

Just sent you money for 2 s14 cupholders for the pre-order special.

Thanks

Payment received. Apologies for my late reply. Was moving today and this was my first chance to look online.

Also, where would you recommend for the best mounting location in an s14?

I designed the bracket so that the cup holder could be mounted on the passenger side of the center console. However, you can mount them wherever you feel it bests suits your needs.

[jrivera]

Mod, please delete this post.

[jrivera]

Apologies S14 members, the adhesive still hasn't arrived. For those who ordered, if you are willing to wait, I appreciate your patience. If you do not want to wait, please let me know and I will refund your money.

I still have a bunch of S13 cup holders for sale.

[KoukiTony]

Any idea how much longer it will be before the adhesive comes in?

[nismonismo240sx]

If you have the adhesive ready by this weekend. Put me down for one s14 cup holder.

[jrivera]

Any idea how much longer it will be before the adhesive comes in?

If you have the adhesive ready by this weekend. Put me down for one s14 cup holder.

I spoke to the manufacturer this morning. The adhesive will be in by the end of next week. (so they say...) Sorry guys! :(

[df3kt760]

i jus sent $

[jrivera]

i jus sent $

Received. Your S13 cup holder will ship tomorrow.

Thanks!

[jrivera]

i jus sent $

Received. Your S13 cup holder will ship tomorrow.

Thanks!

Cup holder shipped!

[jrivera]

Those who have pre-ordered the S14 cup holders, I truly am appreciative for your patience. Very shortly!

[Tempo]

Bump , very tempted in an s14 cup holder , its going to change my life forever lol , op when do you think the adhessive will come in for the s14 cup holders , & is there going to be increased price for the new adhessive ?

Sent from my HTC Sensation 4G using Tapatalk 2

[jrivera]

Mod, please delete this post.

[nissanfreak317]

Just sent payment for a pair of non-bracket cupholders.

Many thanks!

[Tempo]

Just sent $ for a pre ordered S14 cupholder with bracket , bump for OP's awesome inginuity , looking forward for the cupholder

Sent from my HTC Sensation 4G using Tapatalk 2

[jrivera]

Just sent payment for a pair of non-bracket cupholders.

Many thanks!

Payment received and cup holders have been shipped.

Just sent $ for a pre ordered S14 cupholder with bracket , bump for OP's awesome inginuity , looking forward for the cupholder

Sent from my HTC Sensation 4G using Tapatalk 2

Payment received. Thanks for the compliments! S14 members, apologies for the delay but once the adhesive comes in, you will be happy with them. :wiggle:

[nissanfreak317]

Payment received and cup holders have been shipped.



Thanks! I'll be buying another set for my coupe when I get paid next, haha.

[jrivera]

Thanks! I'll be buying another set for my coupe when I get paid next, haha.

Awesome! PM sent.

[jrivera]

For those who have received and installed your cup holders, can you please leave seller feedback/review?

Thanks again!

[jrivera]

Adhesive came in!!! All pre-orders will be shipped on Saturday.

Pre-order sale is over.

[jrivera]

I have a limited supply of cup holders left! Then they will be on back order for about a week.

[jrivera]

I have news for S14 members. After numerous attempts to make a bracket and whatnot, thanks to Edgar (lenox_240) for finding the perfect location for mounting the cup holder. The best location to mount it is on the passenger side of the center console. This location has been tested and works well. The other possible location is in the compartment in the center console. I will post pics of both locations. This means that the price will be the same for both S13 & S14 cup holders. Those who have paid the old price, I will refund you the difference. If you have ordered a set of 2 and only want 1, please let me know.

On with the pictures...

Here’s a picture with the seat all the way forward
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/DSC04730.jpg

Seat all the way forward and glove box opened
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/DSC04729.jpg
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/DSC04733.jpg
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/DSC04732.jpg
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/DSC04731.jpg
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/DSC04734.jpg
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/DSC04735.jpg

Possible other location
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/DSC04723.jpg
http://i10.photobucket.com/albums/a138/joshrivera/Cupholder/DSC04724.jpg

If you purchase the cup holder(s) and mount it/them elsewhere, I can’t guarantee it will stick.

[jrivera]

It has come to my attention that in very high heat, one of the adhesives slowly starts to peel off (the adhesive between the cup holder and insulation. This has happened to 2 members.

Since I stand behind my work and want to make sure every member is happy, this morning I mailed everyone who has purchased cup holders new insulation with new and higher temperature adhesives. Those who pre-ordered S14 cup holders will not be receiving them as I did not use that adhesive on it.

I also enclosed instructions. Apologies for any who experienced that issue.

And as always, thanks for all the support.

[S14DB]

For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES.

http://zilvia.net/advertise.html