◄sr24 beast ultimate part out►full race│tial│tomei│toda│greddy│hks│blitz│apexi│earls ‼

[ETHANOLED SR]

It is time to part out my insane build ‼
I've spent lots of time, sweat, blood, tears, and needless to say insane amounts of money to get this dream to this point... within the last year or so I've had to balance 3 jobs, 2 kids, 1 wife all while working on my gemology graduate degree, I've had not a minute left to spare on my build. I've concluded that it's time to part with it and move on. It's taking space in my 1 car garage and I plan on getting a bike over the summer so I need it gone, never mind that my wife wants it destroyed and hates everything about it! :rant:

A little history recap... The beast has just been garaged collecting dust... I fire it up every now and then just to get the oil lubricating the internals and water temp to operating level. It's never seen the track, never dynoed the motor to enjoy the setups potential, drove it on the street one time to the gas station and back. It's lacking an aggressive clutch setup for all the power it is to put down, amongst other things like a better transmission and so on.
I've decided to part out instead of selling as whole because for 1 I doubt that anyone will buy the whole setup and 2 if someone does, I wouldn't get much for it! I'm already taking a huge loss as is!
If you've followed my build thread in the past then you know the amount of work and money that went into this setup... All the parts I've used are brand new high quality and top brand, The motor has been fired up less times then I can count on both hands. Ran at idle to operating temps and turned off... I can't even tell you mileage cause honestly it wouldn't add up to a few none the less.

I know how much all these parts go for and how much I paid for them brand new so plz don't low ball. My prices are what I think is a fair rate considering they're practically brand new still!
I will be updating the thread as often as I can due to the extended list of parts. I will take more pics by request but am also posting a bunch so probably no need to anyways.

Not sure how I plan on selling the fully built stroked block (when I say fully I mean FULLY just read the block specs for reference) but as of right now I'd rather part it out down to internals and all!
I will wait on the block part out till after I have sold most of the bolt-ons and externals. I am takoing offers in the meanwhile for anyone interested in the internals of the block and you'll be on a waiting list till then. No prices on the long-block and its internals as of yet but I will update as the part out moves along!
Cylinders were pressure tested at a 100 psi and the results were amazing at a 0% for 1 and 2 and 3% on 3 and 4!!! Not that it matters since it will be parted but I was very happy with the results I had to share it!

Don't know what else to add for now, if you've got questions then shoot otherwise I'll let the pics and parts speak for themselves! Thanks for checking out my part out and plz bump to help this move along! :bow:
PRICES DO NOT INCLUDE SHIPPING AND PAYPAL FEES!!!
PM ME FOR A FAST RESPONSE ALONG WITH A QUICK REPLY ON THIS THREAD.




SR24 PARTS LIST: PRICE:


GREDDY POLISHED PLENUM N15 BORE SOLD
N15 THROTTLE BODY 70MM SOLD
TOMEI T/B ADAPTER KIT SOLD
GREDDY POLISHED TOP FEED FUEL RAIL 10.5MM SOLD
I.D. 1000 CC TOP FEED INJECTORS SOLD
SARD ADJUSTABLE BLUE FPR WITH FUEL GAUGE AN TYPE SOLD
THERMAL GASKET 20.00
S13 AICV 120.00

-6 AN CUSTOM FUEL LINES SETUP SOLD
EARLS HIGH PRESSURE FUEL FILTER SOLD
WALBRO IN TANK 255 FUEL PUMP SOLD

BLITZ 3” INTERCOOLER CORE 300.00
CUSTOM PIPING AND BOV FALNGE 250.00
HKS SUPER SEQUENTIAL BOV 175.00
HOSE COUPLERS AND CLAMPS 60.00
[ABOVE FULL KIT OPTION] [700.00]

FULL RACE TWIN SCROLL DUAL WASEGATE MANIFOLD SOLD
FULL RACE TWIN SCROLL 3” DOWNPIPE SOLD
GARRETT TWIN SCROLL GT3076R .82 A/R V BAND 1250.00
W/POLISHED COMP HOUSING
2 TIAL MVS 38MM WASTEGATES BLUE 1.2BAR SPRINGS SOLD
2 DUMP PIPES AND V BAND FLANGES DIY KIT 160.00
CUSTOM EARLS AN LINES AND FITTINGS SOLD
7 LAYER METAL GASKET SOLD
T3 METAL GASKET SOLD
4” ALUMINUM CUSTOM PIPE WITH K&N FILTER CLAMPS SOLD
AND COUPLERS

APEXI POWER FC D-JETRO COMPLETE KIT SOLD
INNOVATE MTX-L WIDEBAND STANDALONE AFR KIT SOLD
GREDDY PROFEC B SPEC 2 BOOST CONTROLLER 225.00 SOLD
APEXI GAUGES (TACH, BOOST, EX. TEMP, WTR TEMP, SOLD
OIL TEMP, OIL PRESSURE) WHITE FACE WITH
CONTROL BOX. INCLUDES ALL WIRING AND SENSORS
TEIN EDFC UNIT AND WIRING 200.00
S13 IGNITOR CHIP 80.00

GREDDY LIGHTWEIGHT PULLEY KIT SOLD
KOYO RADIATOR 220.00
FLEX-A-LITE DUAL ELECTRIC FANS SOLD
BLUE RAD. HOSES W/WTR TEMP ADAPTER SOLD



SR24 LONG BLOCK SPECS AND LIST OF PARTS:


PEAK PERFORMANCE 2.35L 91MM BILLET STROKER CRANK
CUSTOM 90MM JE PISTONS
CARILLO CON-RODS
TOMEI UPGRADED LARGE OIL PAN
DARTON CAST IRON CYLINDER SLEEVES
ARP MAIN STUDS
WPC TREATED ACL RACE BEARINGS FOR MAINS AND CON-RODS
WPC TREATED PISTON RINGS
OEM OIL PUMP
OEM WATER PUMP
NEW TIMING CHAIN PARTS AND SEALS
TIMING CHAIN TENSIONER
GREX LARGE CYLINDER HEAD STUDS
^PENDING SALE^

CNC PORTED CYLINDER HEAD (FLOW BENCHED)
FERREA STAINLESS +1MM OVERSIZE VALVES-
ON INTAKE AND EXHAUSTS
TOMEI ROCKER ARM STOPPERS
WPC TREATED ROCKER ARMS (ALL – NEW)
TOMEI DOUBLE VALVE SPRINGS W/RETAINERS
TOMEI 280/280 SOLID PROCAMS
TOMEI SOLID PIVOTS WITH CUSTOM SHIMS SOLD
(ALL MEASURED AND DONE)
TODA RACING ADJUSTABLE CAM SPROCKETS SOLD



^^NO PRICES AS OF RIGHT NOW ON THE LONG BLOCK PARTS^^

INSANE AMOUNT OF PICS ARE COMING UP BELOW!!!

[ETHANOLED SR]

http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/BEASTIMG26.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/BEASTIMG1.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/BEASTIMG11.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/BEASTIMG18.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/BEASTIMG66.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0092.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0023.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0022.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0012-1.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0016.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0014.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0004.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0011-1.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0033.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/BEASTIMG54.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0096.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0054.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0056.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0057.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0060.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0075.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/BEASTIMG39.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/BEASTIMG46.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0388.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0004-1.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0233.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0066.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0265.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0266.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/BEASTIMG75.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/BEASTIMG148.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/BEASTIMG140.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0039.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0040.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0028.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0101.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0096-1.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0098.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0104.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0102.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0117.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0130.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/SR24BEAST206.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/SR24BEAST207.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/SR24BEAST212.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/SR24parts62.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/SR24BEAST228.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/SR24BEAST236.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0004-2.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0003.jpg

[ETHANOLED SR]

http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0001.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0005.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/IMGP0007.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/2011-01-14132528.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/2011-01-08225936.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/2011-01-14121459.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/2011-01-14132455.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/2011-01-14132510.jpg
http://i691.photobucket.com/albums/vv275/turbosr123/SR24%20Beast%20build/2011-01-14132434.jpg

[Vikter138]

Great build. The car and engine look amazing. I never thought I post this but damn I wish I had the money for this.
You should try parting the family and jobs out 1st before you do something you regret.

[jdmfan13]

i need a few parts let me now

[projectblak]

I am speechless, glws man

[Q.Smooth127]

WOW BOOO!!! 2 days after i place my order for 2x tial mvs 38mm wastegates n the dyi dump tube setup @ full race's website, THIS shows up. I hate how the world works lol.

I'm prolly gonna want all dem earl's lines you got there n that FAL fan.
whats gonna happen to that s13.5 front end...you gonna sell that too?

[taeisbeast]

wow that is super clean man! Great top notch stuff here.

glws.

[S14TEENZ]

Nismo cap?

[Cease_Super_Hicas]

Dam sick build!!!!! How much for the long block

[speedgod^s13]

Does that intake tube, include the filter, as well as the clamps? If so, I'd be interested.

[GTR_240SX]

How much for the whole car and engine??

[Seraphim38]

I am interested in the Apexi Power FC D-Jetro setup. PM Sent

[ETHANOLED SR]

Great build. The car and engine look amazing. I never thought I post this but damn I wish I had the money for this.
You should try parting the family and jobs out 1st before you do something you regret.

Thanks! LOL... I'm sure I'll start a new build one day but for now I need to sell since I can't dedicate the time.

i need a few parts let me now

You got PM

I am speechless, glws man

Thanks bro!

WOW BOOO!!! 2 days after i place my order for 2x tial mvs 38mm wastegates n the dyi dump tube setup @ full race's website, THIS shows up. I hate how the world works lol.

I'm prolly gonna want all dem earl's lines you got there n that FAL fan.
whats gonna happen to that s13.5 front end...you gonna sell that too?

That sucks... check your pm.

wow that is super clean man! Great top notch stuff here.

glws.

Thank you!

Nismo cap?

check your PM.

Dam sick build!!!!! How much for the long block

I don't think I'll be selling it as whole but I'll be updating soon.

Does that intake tube, include the filter, as well as the clamps? If so, I'd be interested.

Yes it's the filter pipe clamps and couplers... pretty much a steal! check your PM.

How much for the whole car and engine??

1 million dollars... muhhhaaahahaaa! Not selling as whole unfortunately!

I am interested in the Apexi Power FC D-Jetro setup. PM Sent

Check your PM

[1slicktwo4oh]

Pm me shipped price to 90602 for greddy pulley kit

[Edwin562]

Would the FPR include the lines and fittings?? im interested.

[Loganpsd]

Could u pm me a price shipped (78028) for full race manifold, down pipe and waste gates?
Thanks Logan

[ETHANOLED SR]

Pm me shipped price to 90602 for greddy pulley kit

Ok, Give me a few minutes and check your pm. Thanks!

Would the FPR include the lines and fittings?? im interested.

Sorry the lines are already pending but the fpr is the AN type with it's fittings and fuel pressure gauge. PM me a zip code so I can get you a shipped quote unless you can pick up in Culver City.

Could u pm me a price shipped (78028) for full race manifold, down pipe and waste gates?
Thanks Logan

Will do, give me a bit and I'll send you a quote. Thanks!

If I forget to PM anybody plz send me a reminder PM since I'm at work today and I'm swamped already!

[SharkMan]

YYou has pm sir

[ETHANOLED SR]

YYou has pm sir

PM sent... check your PM inbox. Thanks!

[ka-turbo]

how much for the hub adapter, and s15 headlights?...PM me

[ETHANOLED SR]

how much for the hub adapter, and s15 headlights?...PM me

What hub adapter? The S15 lights are not listed for sale! Sorry!

[Mustb18]

interseted in the apexi gauges

[ETHANOLED SR]

interseted in the apexi gauges

sent you a PM.

[Q.Smooth127]

payment sent for the Fal fans + blue rad hoses w/ water temp sensor adapter and the Earl's turbo lines
Sorry i just been hammered with work so took a lil longer to send the paypal haha.

Bump for a legit dude

[JonathanPrem]

payment sent for the Boost controller

[lewisfk]

im intrested in your fuel set up, top mount turbo lines, 1 wastegates and bov. I am putting together a full race set up myself and im willing to drive a pick up! Im in Oceanside!

[ETHANOLED SR]

payment sent for the Fal fans + blue rad hoses w/ water temp sensor adapter and the Earl's turbo lines
Sorry i just been hammered with work so took a lil longer to send the paypal haha.

Bump for a legit dude

Thanks! payment received. Will provide tracking asap.

payment sent for the Boost controller

Thanks as well. I'll get you tracking asap.

im intrested in your fuel set up, top mount turbo lines, 1 wastegates and bov. I am putting together a full race set up myself and im willing to drive a pick up! Im in Oceanside!

check your pm inbox, thanks!

[thebear]

If you dont have someone already buying the engine i am interested

[ETHANOLED SR]

If you dont have someone already buying the engine i am interested

You can PM me for more details... I got some interests in the block already but I'm still not sure on selling as whole... Most likely parting out as of now!

[Pinggg]

One of my favorite SR build i read on here that i can think of.
Bump for some legit ass parts, GL with sale.

[ETHANOLED SR]

One of my favorite SR build i read on here that i can think of.
Bump for some legit ass parts, GL with sale.

Thank you so much, greatly appreciated!

Sorry guys for not getting anything shipped out today... My car broke down on my way to work and it's been a hectic and prolonged day! Just got a minute to sit down and touch bases with everyone!

For anyone interested in any of the above parts plz leave a reply and I'll get at you asap. :bow:

[ETHANOLED SR]

Late night bump...
I keep this thread updated as often as I can so everyone can see what's sold and what is still available. Plz refer to the right of each item for status and availability.

[yoni_nismo]

So sad to see this being parted was going to be a epic car

[RDpl510]

how much for the complete head?

[ETHANOLED SR]

how much for the complete head?

Sent you a PM!

[csramotorsports]

Is the blitz intercooler with end tanks?

And interested in power fc if you will take my offer

[ETHANOLED SR]

Is the blitz intercooler with end tanks?

And interested in power fc if you will take my offer

Sent you a PM.

[ETHANOLED SR]

So sad to see this being parted was going to be a epic car

Yeah, I know what you mean. there will be another Epic build in the future! near future hopefully.

[GUNMETALV35]

Price on JE pistons?

[PeaceOnesxWai]

Thanks for the fuel lines!

[EsChassisLove]

Willing to split the Tomei oil pan from that beyond sexy bottom end?

[heiyuu]

Interested in gauges shipped to 58265. Do u have pics of them lit up and/or at night?

[camo240]

interested in the air fuel wideband. please pm me asap with info and price plz!!

[ETHANOLED SR]

Price on JE pistons?

I rather not split the stroker kit right now!

Thanks for the fuel lines!

Your welcome, thanks for your patience!

Willing to split the Tomei oil pan from that beyond sexy bottom end?

I would rather not but yes for the right price!

Interested in gauges shipped to 58265. Do u have pics of them lit up and/or at night?

yes I do I gotta dig for them or take some new ones for you. I will pm you!

[ETHANOLED SR]

interested in the air fuel wideband. please pm me asap with info and price plz!!

Sorry but it's been sold already...
I have all the parts that are unavailable as SOLD in red bold letters next to each item, and PENDING in orange as it's a pending transaction. All available items have a price next to them other than the block internals.

[tonysreds13]

Your build is freaken amazing damn glws man

[1slicktwo4oh]

Bump for a great seller...thanks for the pulleys....

[driftage240]

how much for long block? complete assembled block with head lmk 818 851 8491

[Drftr915]

Bump for a sick build glws.

[ETHANOLED SR]

Your build is freaken amazing damn glws man

Bump for a great seller...thanks for the pulleys....

^Thanks you!

how much for long block? complete assembled block with head lmk 818 851 8491

I'm parting the block, it won't be complete. I'll text you tonight so we can discuss it in details. Thanks!

[driftage240]

ok well lmk waiting on text

[ETHANOLED SR]

Bump for a sick build glws.

Thank you! Have any more questions just shoot me a PM. Wish people wouldv'e been helpful when I was learning about SRs.

ok well lmk waiting on text

Glad I finally got a chance to reply, sorry it took a while! :bow:

[ETHANOLED SR]

So far I have a pending buyer on the short block and possibly the head with Ferrea +1mm valves, guides/retainers/seals, Tomei dual springs kit, and Tomei RAS, ported and polished both ends. If these don't fall thru I should have pricing up pretty soon!
Had a lot of people ask on for a price but just a couple that are serious.
Please don't ask unless you intend on buying, it wastes my time and yours!!!

[Colton]

goood god holy moly shitballs! nice stuff here... good luck with all the sales!

[ETHANOLED SR]

goood god holy moly shitballs! nice stuff here... good luck with all the sales!

Haha! Thanks you! Help yourself to some of the awesomeness still left.

[ETHANOLED SR]

Still working on pricing the block and head with internals and accessories.
Please do not PM regarding sold items... All available items are listed with a price to the right in green. Block and head still available but not priced as of yet, if interested PM me and we can go from there.
:bigok:

[DertyDan]

Apexi gauges sold to me! Thanks again man

[ETHANOLED SR]

Apexi gauges sold to me! Thanks again man

I sent you tracking info and also to csramotorsports for the power fc!
Thanks for your patience guys!

[Q.Smooth127]

Bump for fantastic seller wit BALLLAHHH parts haha!
Got the stuff, took a lil while to come but was prolly due to you being busy as fawk :). Cherry stuff man, gonna go to good use! People dont sleep on his parts, if you are serious, buy them. You wont be disappointed.
Damn im kinda tempted to just tell Full Race to Cancel my order on the tial mvs wastegate + dump tube setup and just buy yours cause apparently "tial has not dropped off their shippment of wastegates yet -____-" and its been over a month already... those friggen guys.

[ETHANOLED SR]

Thanks bro, I really appreciate it!
Damn, just cancel your order then and get my Tials, I have a minute tomorrow I can ship them with some other packages due to go out. Let me know brother, you got my cell.
Q.Smooth127 - Awesome and legit buyer guys. :bigok:

[ETHANOLED SR]

UPDATE:
I'm starting to take offers on remaining parts... My bike is coming now way sooner than exppected and I need the garage space.
Everything needs to go!!!
Chassis is not listed but needs to go as well has stitch welds throughout engine bay and painted LS blue with custom rewired hidden harness and lots more... transmission also not listed needs to go same with clutch and much much more just not listed yet.
PM and ask if you don't see a part or shoot me an offer on existing parts.
All quality parts and all practically brand new still!
My huge loss is your huge gain!
:sadwavey:

[Pinggg]

Pm'd
mssglength

[twinspool]

Do you still have one or both of the tial mvs wastegates?

[ETHANOLED SR]

Pm'd
mssglength

Check your PM

[ETHANOLED SR]

Do you still have one or both of the tial mvs wastegates?

Got them both... Thanks for the fast payment! will have them out for you tomorrow and I'll PM you tracking asap!

[ETHANOLED SR]

PM me with an offer if interested in any of the remaining parts. :bigok:

[ETHANOLED SR]

Weekend Bump... Make me an offer if you want a part! Shoot me a PM with a zip code for a shipped quote.
Happy Mothers Day to all the ladies with babies!
:rofl:

[ETHANOLED SR]

Pm me if interested in remaining parts... gotta make space!!!

[bladetech8]

GLWS man! You've motivated me to never have kids, let alone 3.. lol. My passion for Nissans will die when I die. :cool:

[ETHANOLED SR]

GLWS man! You've motivated me to never have kids, let alone 3.. lol. My passion for Nissans will die when I die. :cool:

thanks, but I only have 2 kids... in the states! haha! I'm glad your passion for Nissans is that powerful! You should have kids when you're financially ready and as long as you can make enough time for them!

Parts still sitting here guys, make some offers!

[93/240sx]

Would you sell the thermostat housing and the coolant temp housing with the braided line? If so, how much shipped to 73159?

[JonathanPrem]

Good guy to deal with. Thanks again for the Greddy ebc

I might want thsese

-s13 sr iacv- Is that used or new?
-rocker arm stopper- ^^

[ETHANOLED SR]

Would you sell the thermostat housing and the coolant temp housing with the braided line? If so, how much shipped to 73159?

Check your PM!

[speedgod^s13]

Is the short block still pending sale? If not, how much would shipping to 96816 be? This is the guy that bought the intake pipe, with K&N filter from you.

[tsung]

still have the radiator?

[LuckyX2]

PM'ing you about the injectors now...

[ETHANOLED SR]

Is the short block still pending sale? If not, how much would shipping to 96816 be? This is the guy that bought the intake pipe, with K&N filter from you.

It's practically sold! Got a firm buyer on it sorry bro! Other parts are still available if interested! Hope you put the intake to good use!

still have the radiator?

Yes, still got it! Pm me a zip code and I'll get you a shipped quote. Thanks!

PM'ing you about the injectors now...

Got your payment, Thanks! they'll be out tomorrow!

Good guy to deal with. Thanks again for the Greddy ebc

I might want thsese

-s13 sr iacv- Is that used or new?
-rocker arm stopper- ^^

I just emailed you... I'll shoot you a pm as well. Let me know if you want em still! Thanks bro! Glad to hear you're happy with the ebc!

[ETHANOLED SR]

Updated some of the recently sold items... twin scroll turbo, mani, and blitz custom intercooler kit still here. + all kinds of other items. Shoot me a pm if interested.

[ETHANOLED SR]

Sunday Bump... Still got em come and get em!

[Kamikaz3514]

Bump!!! Legit seller!!!

[Future240]

PM sent... check your PM inbox. Thanks!

sent you a PM.

Thanks! payment received. Will provide tracking asap.



Thanks as well. I'll get you tracking asap.



check your pm inbox, thanks!

You can PM me for more details... I got some interests in the block already but I'm still not sure on selling as whole... Most likely parting out as of now!

Late night bump...
I keep this thread updated as often as I can so everyone can see what's sold and what is still available. Plz refer to the right of each item for status and availability.

Sent you a PM!

Sent you a PM.

Yeah, I know what you mean. there will be another Epic build in the future! near future hopefully.

Thank you! Have any more questions just shoot me a PM. Wish people wouldv'e been helpful when I was learning about SRs.



Glad I finally got a chance to reply, sorry it took a while! :bow:

So far I have a pending buyer on the short block and possibly the head with Ferrea +1mm valves, guides/retainers/seals, Tomei dual springs kit, and Tomei RAS, ported and polished both ends. If these don't fall thru I should have pricing up pretty soon!
Had a lot of people ask on for a price but just a couple that are serious.
Please don't ask unless you intend on buying, it wastes my time and yours!!!

Haha! Thanks you! Help yourself to some of the awesomeness still left.

Still working on pricing the block and head with internals and accessories.
Please do not PM regarding sold items... All available items are listed with a price to the right in green. Block and head still available but not priced as of yet, if interested PM me and we can go from there.
:bigok:

I sent you tracking info and also to csramotorsports for the power fc!
Thanks for your patience guys!

Thanks bro, I really appreciate it!
Damn, just cancel your order then and get my Tials, I have a minute tomorrow I can ship them with some other packages due to go out. Let me know brother, you got my cell.
Q.Smooth127 - Awesome and legit buyer guys. :bigok:

UPDATE:
I'm starting to take offers on remaining parts... My bike is coming now way sooner than exppected and I need the garage space.
Everything needs to go!!!
Chassis is not listed but needs to go as well has stitch welds throughout engine bay and painted LS blue with custom rewired hidden harness and lots more... transmission also not listed needs to go same with clutch and much much more just not listed yet.
PM and ask if you don't see a part or shoot me an offer on existing parts.
All quality parts and all practically brand new still!
My huge loss is your huge gain!
:sadwavey:

Check your PM

Got them both... Thanks for the fast payment! will have them out for you tomorrow and I'll PM you tracking asap!

PM me with an offer if interested in any of the remaining parts. :bigok:

Weekend Bump... Make me an offer if you want a part! Shoot me a PM with a zip code for a shipped quote.
Happy Mothers Day to all the ladies with babies!
:rofl:

Pm me if interested in remaining parts... gotta make space!!!

Check your PM!

Updated some of the recently sold items... twin scroll turbo, mani, and blitz custom intercooler kit still here. + all kinds of other items. Shoot me a pm if interested.

Sunday Bump... Still got em come and get em!

Excessive bumping, you can start a new thread in 5

http://zilvia.net/rules.html
Thread Bumping

You may only bump your thread TWICE. That is not 2 times a day, or two times a week. TWICE only.

A bump is constituted as any unnecessary post you make in your sale thread. This can include:
“Bump”
“To the top”
“All Pms Responded to”
“Price Drop”
Etc, etc, etc

You should utilize the PM system to answer potential buyer's questions, and you can edit your initial post to reflect any detail updates, or price changes.