Tubing Bends

[BTplaya]

Updated 3/26/2012:

My boy was cleaning out his fab shop and I scored a ton of SS & Alum. mandral bends. All in prefect condition. If your making custom manifolds, down pipes, exhaust systems or intake charge tubing I got the bends cheap. If you buy a bunch Ill make ya a deal as its taking up half my garage.

Tubing located in Metro Detroit. Shipping or Pick-Up available

Aluminum;

• 2.125 – .065 wall $13
(1) – 90 deg

• 2.250 – .065 wall $15
(7) – 90 deg
http://www.mifbody.com/vbulletin/attachment.php?attachmentid=40540&d=1332779233

• 2.750 – .065 wall $20
(5) – 90 deg
(2) – 45 deg
http://www.mifbody.com/vbulletin/attachment.php?attachmentid=40541&d=1332779634

• 3.00 – .065 wall $18
(1) – 90 deg
(1) – 45 deg
(2) – Misc
http://www.mifbody.com/vbulletin/attachment.php?attachmentid=40542&d=1332779654

• 4.00 – .125 wall $20
(15+) – 90 deg
(20+) – 45 deg
(20+) – Misc
http://www.mifbody.com/vbulletin/attachment.php?attachmentid=40543&d=1332779673

• 4.50 - .125 wall $25
(4) – 90 deg

Stainless Steel;

• 2 – 304 $20
(10+) – 180 deg
(6) – 45 deg
(10+) – Misc
http://www.mifbody.com/vbulletin/attachment.php?attachmentid=40544&d=1332779721

• 2.125 – 304 $20
(3) – 180 deg
(1) – 90 deg
http://www.mifbody.com/vbulletin/attachment.php?attachmentid=40545&d=1332779743

• 2.250 – 304 $22
(4) – 90 deg
http://www.mifbody.com/vbulletin/attachment.php?attachmentid=40546&d=1332779765

• 2.50 – 304 $20
(6) – 180 deg
(15+) – 90 deg
(10+) – 45 deg
http://www.mifbody.com/vbulletin/attachment.php?attachmentid=40547&d=1332779786

• 3.00 – 304 $30
(10+) – 90 deg
(4) – 45 deg
http://www.mifbody.com/vbulletin/attachment.php?attachmentid=40548&d=1332779807

• 3.50 – 304 $35
(5) – 90 deg
(3) – 45 deg
(1) – Misc
http://www.mifbody.com/vbulletin/attachment.php?attachmentid=40549&d=1332779830

• 4.00 – 304 $30
(15+) – 90 deg
(4) – 180 deg
(6) – 45 deg
http://www.mifbody.com/vbulletin/attachment.php?attachmentid=40550&d=1332779849

[BTplaya]

Quality tubing bends. Emagine all the possiblities.

[BTplaya]

I have updated the OP. I have most of it organized and boxed up by size. Take a look and let me know.

[novita1021]

Pix aren't working

[ch1873857]

what are your shipping prices going to be like. like 5 of each 45 and 90 bends 3 in and 4 in.

[godrifttoday]

Cleaning out garage ? Lol and more than. 100 pieces, seems to me you are the friend with the shop. Need to. E an advertiser

[BTplaya]

Cleaning out garage ? Lol and more than. 100 pieces, seems to me you are the friend with the shop. Need to. E an advertiser


:/ Ya Im an engineer buddy. I hardly have enough room to store all this. Thought I could make a buck and pass on some cheap tubing. You ever try to get a lil extra goin to pay some bills?

[BTplaya]

Pix aren't working


PM me your e-mail and I can send some over that way.

[Venice]

Pm me some prices shipped on the 2.5" stainless 3" as well pictures to my email ( [email protected])

Thanks

[BTplaya]

PM sent. Adjusted the prices on the SS. Take a look.

[e5s4y]

[email protected]
pix of the ss 45 deg bends? Need a new midpipe for my bike, but im not around to measure it right now, so im thinking that might be the right angle.

[shiftdrift]

great seller, got all my bends!