jacobzking
03-21-2012, 07:33 PM
So i just bought the correct Nismo studs for the front wheels of my 95 240sx. RS035 is the part number (verified by multiple sources to be correct). The splines will NOT go in to the grooves on the wheel hub. I tried putting the old OEM stud back in and was able to get it to go in with little to no problem.
I'm guessing that the a-hole that tossed this car back together put the wrong hubs on the car, and that tis car has s13 front hubs... but am not sure.
FWIW... this car has s13 rack and pinion, had s13 inner and outer tie rod ends, s13 brake lines and a whole slew of "wrong" parts on it when I got it.
Anyway to verify (before I go buy a set of s13 studs) that this is in fact an s13 front hub on my s14?
Also, the back of the original studs are marked F
I'm guessing that the a-hole that tossed this car back together put the wrong hubs on the car, and that tis car has s13 front hubs... but am not sure.
FWIW... this car has s13 rack and pinion, had s13 inner and outer tie rod ends, s13 brake lines and a whole slew of "wrong" parts on it when I got it.
Anyway to verify (before I go buy a set of s13 studs) that this is in fact an s13 front hub on my s14?
Also, the back of the original studs are marked F