osoluckygirl's S14 Build

[streetprototype]

doing a build thread for my girlfriend. dont mind the crappy pics as some of them are taken with a cell phone. enjoy:

1995 Nissan 240sx SE,1 owner car, drove 3.5hrs just to get this:drool::
http://i1230.photobucket.com/albums/ee494/Kadukuboi/l_8d56cbd574714ae581d33505e1c19bf5.jpg
http://i1230.photobucket.com/albums/ee494/Kadukuboi/l_7d1ec5f2d7754db9867af1fe9de1ea5c.jpg
___________________________________
then stance coils are put on. sorry no pics

____________________________________

picked up these work evolution stich 18x10 all four corners
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20110308_162523.jpg
____________________________________

drove about 2 hours to pick up some origin sideskirts that were cracked.
$50. all i did was sand,refiberglass,bondo,sand,paint,sand,paint etc

____________________________________

ordered origin roof wing and greddy gracer lip. wrapped them both with zebra print=) the wrap on the roof wing was too much and ended up pulling it off
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20110303_195259.jpg
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20110303_195319.jpg

[JBPUSA]

nice,cant wait to see the finished s14!

[streetprototype]

the birth cert:
http://i1230.photobucket.com/albums/ee494/Kadukuboi/107.jpg
http://i1230.photobucket.com/albums/ee494/Kadukuboi/108.jpg
http://i1230.photobucket.com/albums/ee494/Kadukuboi/109.jpg
http://i1230.photobucket.com/albums/ee494/Kadukuboi/110.jpg
________________________________
picked up a vis 3 piece rear bumper. had it painted and slapped it on
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20110321_115656.jpg
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20110321_151956-1.jpg

[streetprototype]

front stock headlights looked too boring and old..so got these.
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20110303_134806.jpg
_________________________________
then these clear corners
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120215_083003.jpg

http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120215_082952.jpg

_______________________

then i did the worst thing to a urethane front lip...i BROKE IT! reason for pic up with stock lip
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20110921_161451.jpg

[J.Winnfield]

Awhhhhh yeah. Looking good! This is Julian by the way lol. Lets get some pics of that motor :D

[streetprototype]

shhhhhhhhhh.....

[Pinggg]

Not quite a build yet..

[streetprototype]

random shots:
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20110321_161357.jpg
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20110814_171808.jpg
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20110814_171758.jpg

http://i1230.photobucket.com/albums/ee494/Kadukuboi/Sylvia.jpg
http://i1230.photobucket.com/albums/ee494/Kadukuboi/Sylvia2.jpg

[streetprototype]

front tension rod went to hell so replaced with SPL.
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20110921_151456.jpg
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20110921_151422.jpg
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20110921_151406.jpg
____________________________

installed STANCE rucas. http://i1230.photobucket.com/albums/ee494/Kadukuboi/stance.jpg ____________________________
waiting to be installed as we speak
-SPL solid differential bushing
-STANCE solid subrame bushings
_____________________________

[holybushoffire]

So, where's the build?

[Pinggg]

So, where's the build?

I'm with this guy...

[streetprototype]

OH My! what is that? oh yeah thats right a Tomei traxx 2way LSD
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120211_160241.jpg
__________________________
under the knife swapping the ka with s14 sr
bye bye ka
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120314_090733.jpg
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120314_183441.jpg
fidanza flywheel with exedy stage 2 3 puck
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120314_160956.jpg
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120314_160950.jpg
______________________________________
and its in. for got to mention replaced belts thermostat and water pump
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120314_193101.jpg
NismoAlan posing
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120314_193051.jpg
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120315_175106.jpg
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120315_175058.jpg

[Om1kron]

I'm assuming he's not done posting his picture thread, I'll sit this out until further posts are made

[streetprototype]

so after the powerplant swap its up and running. ill get you guys more pics as i come to it. and ill be sure to update more i as i get around to doing more of the suspension for her. all in all, the girlfriends happy with whats shes done so far to the car. now i can start on ish haha.

to be installed and updated
-removal of the subframe to remove subframe bushings and diff bushings and press in the spl and stance solid bushings
-inner outer tie rods
-prep and paint spare valve cover
-waiting on ARC cam/coilpack cover to come in should be here thursday
then its off to drift school for her haha
BIG THANKS TO SVPERFORMANCE AND ALL THE HOMIES THAT HELPED OUT!
cheers!
http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20111222_184525.jpg

[winter]

3 puck clutch good lord

[ixfxi]

this is an awesome build thread


for being from portland - land of the ugly chicks

[taffyk20si]

very nice! Clean looking car.

[OBEEWON]

Is this true sir?

Because I was thinking of working for Nike but if the chix are beat forget that.

[revcyanide]

Is this true sir?

Because I was thinking of working for Nike but if the chix are beat forget that.



holy shit.

you have no idea.

NO IDEA.

unless you like tatted alternative chicks, DEF some hot ones of those.

but even they are few and far between.

[OBEEWON]

All the cute ones died of dysentery?

http://maryalicea.files.wordpress.com/2012/02/ot.jpeg

[revcyanide]

All the cute ones died of dysentery?

http://maryalicea.files.wordpress.com/2012/02/ot.jpeg

basically :/

it was awful.

[zooopreme]

Your thread had me at the Work wheels then the ZEBRA print...glad that shit cracked.

[streetprototype]

Update:
so waiting on what color she wants to paint the valve cover, this came in today...........

http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120322_224710.jpg

[flossyrobinson]

nice! ...did i sell you an s13 shell a long time ago?? things are looking good ;)

[KiLLeR2001]

First picture in this thread should have been of the girlfriend. Now it is doomed for failure.

[streetprototype]

@Flossy,yeah I did buy the s13 shell from you a while back ago
And thx guys for some of the kind comments.

[streetprototype]

**update**

so i did the valve cover design with SHARPIE! all line work and dotted.

http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120611_192152.jpg

http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120623_112953.jpg



http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120616_031442.jpg

http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120613_203737.jpg

http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120616_031442.jpg

http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120623_113202.jpg

http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120623_111715.jpg

[streetprototype]

***update***

bought and installed the clear lenses

http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120608_192710.jpg

http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120608_192730.jpg

http://i1230.photobucket.com/albums/ee494/Kadukuboi/IMG_20120615_180503.jpg

http://i1230.photobucket.com/albums/ee494/Kadukuboi/rose_festC076.jpg

[dreamin240sx]

valve cover looks great man

[fckillerbee]

will that marker actually hold up to temps? pretty dope idea.

[towlie]

Valve cover is sick did u hit with some clear coat?

[project-D180]

thats the illest valve cover i ever seen...how much you charging to get one done

[starfire240]

Thats a sick valve cover! By far the coolest I've seen. Your girl is lucky and she best be making it worth your while mate

[streetprototype]

Valve cover is clear coated with high temp engine paint as well as the gray(primer). Can of each does the job. I was on a deadline for a carshow and baked it in the oven at 275 for 2 hours. Sharpie and paint held up with no flaking. Up till now still looks good as the day I was done with it.

@project d180..depends on what u want done bro. I have accumalated just about 40 hours on the valve cover alone,from prepping,sketchin,linework, and so forth.

@starfire240...she's def makin it worthwhile now ;P

[streetprototype]

Btw guys thanks for the compliments. I have a spare valve cover I'm doing. Right now it sits as I come up with a theme for it. White base and color now on this piece. Stay tune for more updates.and I apologize for such a long update.

[brndck]

this is an awesome build thread


for being from portland - land of the ugly chicks

clearly you've never been to devil's point.

every time i've been to pdx i meet gorgeous women.
that city has some of the best food i've ever had too.

[Dustxking]

^ This man speaks the truth, gorgeous weaon and food cart heaven.

[dopplganger1]

Devils point is a bunch of tatted alternative chicks, we def don't have gorgeous woman we have some good looking ones but nothing in comparison to cali or Guadalajara or Hawaii, we do have some great food and a pretty much endless variety

Sent from my HTC VLE_U using Tapatalk 2

[tqstarburst]

I'm in for pics of the gf.

Anyways, i like you valve cover.