Will pay someone to get my sr20 running right

[Keefs240sx]

Located in nc an want someone to come get my sr20 running right tired of trying crap an everything people saying to try ain't working its so aggravating I can't stand it help!!!!!! will pay someone lmk ASAP I want this thing going

[steve shadows]

What exactly is up with it?

I do remote consulting and base maps and mapping service remotely as an extra help for a lot of forum members for tuning. If you need physical help then I would post something in regional for mechanic help. cheers

[Keefs240sx]

Having problems with idle now idled fine after I got it swapped an wouldn't go past 2500-3000rpms an keep trying what ppl say it's maf tried that 3 different ones an nothing an timing etc an it's jus a headache I've had the car for at least 6 months an moved it total of maybe 20ft an jus keep dumping money into it very aggravating with my job I don't get a full days work in on it im jus fed up its order a part wait few days get it an not fix it an order another an nothing

[ssmokerjoe]

i'd double and triple check you mafs wireing , worst case try and pull any codes and go from there...possable ecu malfunction

[wangan_cruiser]

Having problems with idle now idled fine after I got it swapped an wouldn't go past 2500-3000rpms an keep trying what ppl say it's maf tried that 3 different ones an nothing an timing etc an it's jus a headache I've had the car for at least 6 months an moved it total of maybe 20ft an jus keep dumping money into it very aggravating with my job I don't get a full days work in on it im jus fed up its order a part wait few days get it an not fix it an order another an nothing

not trying to be an ass but that problem has been covered shitload of times here. if you dont have patience fixing a car up you shouldnt modding a car in a first place.

like the guy above me said, double check your wiring and maf. it is most likely a maf problem. try to pull codes to narrow down the problem. bitching at it wont really help you solve the problem. just be patient and keep your head up. you are not the only and last person who deal with that kind of problem.

[Keefs240sx]

Every one says check maf wiring how come I got all the volts to the wiring therefore shouldn't it be good wiring if I'm getting the volts?

[wangan_cruiser]

Every one says check maf wiring how come I got all the volts to the wiring therefore shouldn't it be good wiring if I'm getting the volts?

what voltage do you get? did you try pulling codes from your ecu? if you cant narrow the problem down then you gonna end up on a wild goose chase. trust me its no fun when you ran out of idea

[Keefs240sx]

12v on one an 5v on the other


Also even tried different mafs an even a z32 an nothin

[Jasonx63]

are you tuned for a z32 maf? if not then it wont run.

[Keefs240sx]

No stock ecu but someone said try an I did an nuttin

[StreetSurge]

your good now ...go have fun

[two40silvia]

Are you running an sr maf or a single cam maf?

[2bad240]

where in nc are you located?

[crayzwhiteboy]

your good now ...go have fun

did you fix it for him?

what was the issue?

[Keefs240sx]

Yes street surge fixed me up, thanks to him