btothefnrock
03-12-2012, 10:36 PM
Up for sale are my 18" Motegi M116 wheels 5x114.3 and 5x120 Pattern
Asking $500 + Shipping, or meet near Blacksburg, VA
Tires are Hankook Ventus V12 Evo (225/245), but are all near death.
Fronts 18x8 +35
Rears 18x9 +37
One of the fronts has a bend in it (you can see in the picture) Not terrible, holds air fine, never really notice a vibration until around 90mph (I'm pretty sure that was caused by the spacers not being hub centric though)
Some slight curbage on two of them, but you can not see it from more than 2 feet from the wheel (black lips!)
I also have a set of spacers I could sell as well that make them set pretty good on a 350z (not sure exact thickness, but around 25mm and 30mm) they also have ARP Studs installed. I'll have to measure them, but they are still on the car currently.
What they looked like on my car
https://lh3.googleusercontent.com/-L2Rdy_k6OXQ/TwnO0XNgDSI/AAAAAAAABns/6pu8_iUrR7I/s912/1231111641.jpg
And off the car as of this weekend-
https://lh6.googleusercontent.com/-dVG5bwvQBKI/T14pkohhN0I/AAAAAAAAB2M/ygTjTSUtZkw/s912/0306121707.jpg
(bent wheel on top to show lip)
Wheel 1 (front)
https://lh6.googleusercontent.com/-YRQOQ0CGbew/T14pe60QBaI/AAAAAAAAB1s/MhHIenmYc7M/s912/0306121705a.jpg
Wheel 2 (front) (this is the one with the bend- its at the bottom in the pic)
https://lh4.googleusercontent.com/-btMcVgV0AbY/T14pjHMxKnI/AAAAAAAAB2E/LmGCvn3X4zs/s912/0306121705.jpg
Wheel 3 (rear)
https://lh3.googleusercontent.com/-7bgCwQcojs0/T14phFWcbcI/AAAAAAAAB18/MJ8uhXg91C0/s912/0306121705b.jpg
Wheel 4 (rear)
https://lh5.googleusercontent.com/-TNRF7oA0pcA/T14pgAAyekI/AAAAAAAAB10/OprZrdO39_0/s912/0306121705c.jpg
and here is a pic of one rear cleaned up a bit better
https://lh5.googleusercontent.com/-D_BDW1FEG_A/TwnOw3V4HdI/AAAAAAAABnk/iTqsLb2uuko/s912/1231111641a.jpg
If you need some clearer pics, I can go take some with something better than my phone. Sorry for the water/dirt on the pics!
Please email me at [email protected] for fastest response.
Asking $500 + Shipping, or meet near Blacksburg, VA
Tires are Hankook Ventus V12 Evo (225/245), but are all near death.
Fronts 18x8 +35
Rears 18x9 +37
One of the fronts has a bend in it (you can see in the picture) Not terrible, holds air fine, never really notice a vibration until around 90mph (I'm pretty sure that was caused by the spacers not being hub centric though)
Some slight curbage on two of them, but you can not see it from more than 2 feet from the wheel (black lips!)
I also have a set of spacers I could sell as well that make them set pretty good on a 350z (not sure exact thickness, but around 25mm and 30mm) they also have ARP Studs installed. I'll have to measure them, but they are still on the car currently.
What they looked like on my car
https://lh3.googleusercontent.com/-L2Rdy_k6OXQ/TwnO0XNgDSI/AAAAAAAABns/6pu8_iUrR7I/s912/1231111641.jpg
And off the car as of this weekend-
https://lh6.googleusercontent.com/-dVG5bwvQBKI/T14pkohhN0I/AAAAAAAAB2M/ygTjTSUtZkw/s912/0306121707.jpg
(bent wheel on top to show lip)
Wheel 1 (front)
https://lh6.googleusercontent.com/-YRQOQ0CGbew/T14pe60QBaI/AAAAAAAAB1s/MhHIenmYc7M/s912/0306121705a.jpg
Wheel 2 (front) (this is the one with the bend- its at the bottom in the pic)
https://lh4.googleusercontent.com/-btMcVgV0AbY/T14pjHMxKnI/AAAAAAAAB2E/LmGCvn3X4zs/s912/0306121705.jpg
Wheel 3 (rear)
https://lh3.googleusercontent.com/-7bgCwQcojs0/T14phFWcbcI/AAAAAAAAB18/MJ8uhXg91C0/s912/0306121705b.jpg
Wheel 4 (rear)
https://lh5.googleusercontent.com/-TNRF7oA0pcA/T14pgAAyekI/AAAAAAAAB10/OprZrdO39_0/s912/0306121705c.jpg
and here is a pic of one rear cleaned up a bit better
https://lh5.googleusercontent.com/-D_BDW1FEG_A/TwnOw3V4HdI/AAAAAAAABnk/iTqsLb2uuko/s912/1231111641a.jpg
If you need some clearer pics, I can go take some with something better than my phone. Sorry for the water/dirt on the pics!
Please email me at [email protected] for fastest response.