PDA

View Full Version : S14 start issues, Nismo 740cc bad? Need help


ctsedan
03-12-2012, 06:59 AM
I just finished my swap and trying to start the engine but it wont fire. It will turn over but not start.
Specs
S14 Blacktop
Stock WC ECU for now
740cc nismos
Circuit Sport Fuel rail
SARD FPR
Splitfire ingnition

So far I have checked the following
Fuel pump is working, the FPR gauge moves as the car cranks. Pulled line off the fuel rail, fuel is there. I have pulled the spark plug out and it has spark. I set the CAS timing myself, followed Frsport write up. I tried moving the cas while cranking and no change. I also checked the power to the fuel injector plugs, it has power. I also checked the 740cc injector resistance, they measure 0.011~0.012 when set to 2K Ohms.

Can someone tell me what the ohm reading should be on the injectors??

Also if the car is not running can the fuel pressure be adjusted? what should the pressure be before it starts? I found that the idle pressure should be 43.5.

I cant hear if the injectors are pulsing, I assume its has something to do with this issue, also when i pulled the spark plug, it seem very dry, no fuel.

Thanx for any help